Best Power Loss Protection

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

5V@5A ( Built-in switch mode BEC Regulators )..
Throttle range calibrated function: to adapt the throttle differences between different stroke, improve the linearity of throttle response..
Comprehensive protection features:undervoltage protection,Overvoltage Protection,Overheat protection,remote signal loss protection..
Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury..

High purity copper windings maximizes efficiency.
Short stator, less wire, lower resistance, more power.
Consistent and high-power output provide longer run time Super smooth and accurate throttle linearity Fast response to throttle input.
Mutiple protection features: Low voltage cut-off protection for lithium or nickel battery, Over-heat protection, Throttle signal loss protection, Motor blocked protection.

【Specification】:Rating input current 2.89,Start current 0.96,Operating temperature -20~50,Waterproof level IP65, Net weight .
【Suitable for MH and HPS】:TOPHORT electronic dimmable ballast compatible with both MH and HPS bulbs,120V and 240V power supplies..
【Stable Output Voltage】:High-frequency output results in less power loss (50/60Hz Frequency)..
【Super-Safety】:TOPHORT digital ballasts are tuned for minimal total harmonic distortion (THD%) 99% Power factors replaceable outset fuse by input terminal for short circuit protection short circuit protection by automatic power shut off for ultimate safety fast lamp ignition by lighting up the bulbs within 1-3mins max..
【Guarantee Assurance】:Our TOPHORT HPS grow light ballasts are UL Certified and come with a 2-year warranty against manufacturer defects. If your order is more than one month, please don’t contact Amazon, contact the seller directly, we will provide you with warranty service..

Provides superior protection against high and low voltage transient surges,regulatory compliance CE,RoHS.
Suitable for CATV,MATV,SATV,cable net and other communication system in-line coaxial surge protector.
Install and teardown simply,low insertion loss and high return loss,DC outlet for remote power supply.
Return Loss:5 to 862MHz:typ 20dB,GM 18dB,863 to 1002MHz:typ 20dB,GM 18dB,1125-1750MHz:typ 16dB,GM 14dB,1751 to 2502MHz: typ 14dB,GM 12dB.

【Noise Suppression】The shooting ear protection have a noise reduction rating of 22 decibels, which can quickly reduce noise when shooting or in other noisy environments. Our ear protection help you hear normal or light sounds while protecting your hearing from damaging noise levels. Most generic tactical noise reduction hearing protection can do this, but our ear protection for shooting can amplify normal sounds through the sound pickup function, and we amplify sound without distortion.
【Two Modes of Noise Reduction】Our hearing protection for shooting range has developed two noise level functions, indoor and outdoor mode. You still need to hear the sound of normal speech nearby while using ear plugs for shooting range. The electronic ear protection for shooting in noisy environments, to improve clarity while reducing background noise. Noise-reducing earplugs are suitable for use in high-noise environments, such as shooting, training, manufacturing, and construction.
【Long Battery Life】The ear protection can be powered for up to 8 hours and have a low battery alert function, equipped with a portable charging case and an anti-loss silicone tether. The sho....

Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs.
5v/3A UBEC (Very Efficient) - ESC can power receiver and servos.
LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4V - 16.8V.
Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection.
Programmable - Programming Card or using Transmitter.

Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs.
5v/3A UBEC (Very Efficient) - ESC can power receiver and servos.
LiPo 2 - 4s (Cells), NiCd/NiMH: 5 - 12 Cells, 6.4v - 16.8v.
Low Battery Protection, Overheat Protection, Startup Throttle Protection, Signal Loss Protection, and Abnormal Voltage Protection.
Programmable - Programming card or using Transmitter.