Best Power Line Fitting

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

...i. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..

♥【Specification】①Optional Voltage: 12V.②Power supply: 12V / 8A.③Material: Copper, Iron.④Weight: about 3KG. ⑤Size: 23 x 21 x 10cm/9.3" x 8.5" x 3.9". ⑥Fitting required - 5/8'' (16mm) inner diameter water hose..
♥【Feature】①Comes with mounting brackets and control switch.②Very easy to install , only need to hook this heater up to water tank and supply power , then works..
♥【Package】Included: ①1pcs x heater. ②4pcs x Black tubes. ③2pcs x Tee. ④2pcs x mounting brackets.⑤1pcs x switch.⑥2pcs x straight fittings. ⑦8pcs x 16-25cm hose clamps..
♥【Instructions】①The red line is connected with a power supply's positive pole and motor's positive pole.②The blue one is connected with the motor's negative pole.③The black line is connected with a power supply's negative pole..
♥【Using】①Applicable models: trucks, minivans, excavators, harvesters, tricycles and so on..

GlowShift Boost MAP Line T-Fitting Adapter Allows Users to Install a Boost Hose or Sensor to the MAP Line for Accurate Readings Directly from the....
Compatible with 1992-1997 Ford F-Series 7.3L Power Stroke, 1999-2002 Ford Super Duty 7.3L Power Stroke, 2003-2007 Ford Super Duty 6.0L Power Stroke,....
Features a 1/8-27 NPT Female Thread Port, (2) 3/16" Barbed Fittings & (2) Hose Clamps.
Includes Step-By-Step Installation Instructions.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

The product is highly durable and easy to use.
For tapping into a 3-Inch or 4-Inch Sch. 40 DWV line.
Saddle is solvent welded to the existing line and secured with metal V-bolts, washers and nuts provided in the kit.
The tee accepts the incoming line inside the socket, or joins with a Sch. 40 DWV fitting.

✔COMPATIBILITY: Compatible with water filter system or reverse osmosis with 1/4" or 3/8" plastic water line. Fits for iSpring, APEC Water Systems, Whirlpool, Express Water Reverse osmosis system, And Frizzlife MP99, Culligan, Brondell, Aquasana Water filtration system..
✔MULTI-USAGE: Provides pure water from your RO system or water filtration system to your ice makers, refrigerators, water coolers, fridge dispensers and more. The T fitting allows the system to function for both application with no loss in performance..
✔COMPLETE ICE MAKER WATER LINE KIT: 20feet NSF certified 1/4" tubing, TWO set compression fitting nut, 1/4" Tee fitting and 3/8" Tee fitting allow you to connect to both 1/4" and 3/8" water line water purifier system or RO system..
✔TOOL-FREE INSTALLATION: Push-in quick connect fittings offer easy DIY installation with no tools required..
✔HIGH QUALITY COMPONENTS & 100% SATISFACTION: Superior high strength quick connect fittings and adapters ensure long lasting and a guaranteed leak free experience..

【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....

Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..

【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..

6AN female swivel to 3/8 barb fitting 45 Degree.
Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..