Best Portable Three Phase Power

Hoverboard Morning

Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
"Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
Standard heat sink,onboard speed regulating potentiometer，you can use it when you have power on..
DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
"Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".

Check Stock

PRINCE CASTLE Drive Motor Assembly 87-028AS

ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Check Stock

YWBL-WH Monitoring Relay,JVRD6 Phase Sequence Protection Relay Monitoring Voltage Control Device

Function: Three-phase monitoring of phase sequence, phase loss..
Application: This monitoring relay is suitable for pumps, fans, blowers, motor elevators, cranes, central air conditioners, etc..
Construction and installation: This phase sequence relay uses standard modular construction and rail-mounted mounting..
Power supply mode: Powered by the measurement circuit, no additional auxiliary power supply is required..
Accessories: With 2 indicators to indicate various working conditions, the two groups usually open/close contacts..

Check Stock

3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

Voltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

ATO 3 hp 2.2kW 10A VFD, Single Phase 120V Input, 1phase/3phase 220V Output Variable Frequency Drive Motor Control

ATO 3 hp (2.2 kW) VFD, single phase 110v/120v input, single phase or three phase 220v output variable frequency drive, specially designed for 120v power supply.
【voltage&frequency】Input voltage : 1 phase 120V AC ±15%.
Output voltage: 1 phase or 3 phase 220V AC ±15%.
【APPLICATION】: ATO 110V VFD Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】: If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Check Stock

H61Computer Motherboard, M ATX All Solid State Capacitor Computer Motherboard, LGA1155, DDR3, Three Phase Power Supply, Support I3 I5 I7 CPU

Three Phase Power Supply Mode: With 4pin power interface and 24pin power interface, three phase power supply mode. Good compatibility and expansion space, does not occupy system memory..
All Solid State Capacitors: Better stability, High Definition Multimedia Interface VGA high definition display interface..
Multifunctional: The motherboard integrates sound card, graphics card and network card, supports for Intel Core I7 I5 I3, Pentium and Celeron..
Material: Made of high quality materials, the desktop motherboard is durable, strong and stable..
High Performance: Optimized power circuit layout and digital power regulation to deliver precise and stable current to the CPU..

Check Stock