Best Polyurethane Part

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 5 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

FIBERGLASS WAREHOUSE Pour Foam 2 lb Closed Cell 2-Part Expanding Polyurethane Boat Floatation Coast Guard Approved (2 Gallon)

  • 2 lb Density Marine-Grade expanding foam: Closed cell foam, perfect for flotation, insulation, soundproofing, or filling voids. This pour foam is U.S. Cost Guard approved and is ideal for use in dock floats and boat parts..
  • Easy mixing and handling: 2-part liquid resin component system with a 1:1 Mix Ratio to produce the expanding polyurethane foam. Starts foaming after 45 seconds of mixing, and 7 minutes to full expansion. Build multiple layers by pouring the mix in separate batches to form strong bonds between layers..
  • 94% Rigid Closed-Cell Foam: Once the foam is cured, it helps prevent moisture absorption and won’t be affected by solvents, oil or gas. The cured foam can be cut to any desired shape or be coated with polyester, epoxy, or vinyl ester resins..
  • High-Quality polyurethane foam: This waterproof foam sealant will have a buoyancy of approximately 300 pounds per gallon foot, and a density of 2.0 lbs/ft3. This product does not contain any CFC blowing agents..
  • Package content: Our Fiberglass Warehouse 2-part Pour Foam includes 1 gallon of each component for a total of 2 gallons. It is a two liquid resin component system that produces foam when mixing part A and B together..
Check Stock

AWF PRO Sikaflex 1a Kit - One Component, Flexible, Non Sag, Polyurethane Concrete and Masonry Sealant for Vertical and Horizontal Surfaces, Sikaflex 1a 10 oz Limestone (12), AWF 2000 Caulk Gun (1)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

Tuff Toe Pro BLACK Baseball Fastpitch Softball Cleat Guard | Pitcher Shoe Drag Protector

  • Tuff Toe Pro is an abrasion, chemical, and water resistant polyurethane adhesive specially designed to provide long-term protection for your cleats..
  • Tuff Toe is applied as a thick 2-part epoxy/polyurethane and cures to form a durable yet flexible protective layer with a permanent bond.
  • Contains enough material to cover the toes on two cleats or shoes with our standard application pattern.
Check Stock

Rust-Oleum 206999 Marine Topside Paint, White, 1-Quart - 4 Pack

  • UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that's less abrasive than traditional silica additives.
  • LONG-LASTING POLYURETHANE FINISH: Durable coating won't fade or peel.
  • easy to clean - scrubbing won't wear away the finish.
  • affordable way to bring your old boat flooring back to life.
  • NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing.
  • 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces.
  • add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon.
  • COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons.
Check Stock

Funny Rock Climbing Gifts. 11 oz Climber Coffee Mug. Gift Idea for Climbers. (White)

  • Mug is made with real climbing hold from polyurethane. Bolt part are imitating steel and made from polyurethane. Porcelain mugs are very attractive with their unusual shape and stylish design. Made of flawless white eco porcelain suitable for everyday use..
  • Could be easily handled with left and right hand. Mug handle makes easy to use mug and it non slipping in hands. Hold are big enough to use Mug and do not touch the surface of the mug avoiding burn the fingers from hot surface..
  • Handle and all it parts are from polyurethane and suitable for use in microwaves and could be heated up to the temperature 195F (90C). Used materials do not release any gases or vapors during heating..
  • Nice looking packaging box made from wood. Perfect gift box..
  • 4 different colors, 16 Oz or 460ml. Dishwasher safe. Due to the difference between different monitors, the picture may not reflect the actual color of the item..
Check Stock

Sanita 'Mohawk' Danish Clog Boots in Antique Brown (Art:452203) - 40

  • PROFESSIONAL CLOGS FOR WOMEN: The Professional PU style features a polyurethane-coated leather upper with a padded instep and a microfiber insole with an anatomically correct footbed. The polyurethane outsole features a rocker bottom. This style is approved by the APMA and part of our Professional Collection..
  • DURABLE, SHOCK ABSORBING OUTSOLE: Put some distance between your feet and those hard, concrete floors. Go from ouch! to ahh! with every step. Never feel cramped or squished. Lots of rooms for your toes here. Go ahead and wiggle them..
  • ARCH SUPPORT AND COMFORT: So comfy! A soft footbed adds cushioning, wicks sweat and provides arch-support that helps protect from foot and back fatigue. Give your feet a pep talk in the form of an anatomically correct footbed with arch support and say so long, foot fatigue!.
  • APMA APPROVED: Sanita Clogs are doctor approved! Our clogs have long carried the Seal of Acceptance from the APMA, meaning doctors recommended our clogs!.
  • EASY TO CLEAN: Polyurethane-coated clogs can easily be wiped down with soap and water or alcohol for a deeper clean..
Check Stock

M-world Slim, Light, semi- Hard, Eye Glasses Case (Black)

  • size:Outer dimensions/W2.63×D1.25×H6.1 Inner Dimensions/W2.44×D1.06×H5.9(inch)Weight: 1.79ounces .
  • Material: Faux Leather . Soft faux Leather design, fashion and durable (Polystyrene, polyurethane.
  • lining: polyester)Country of origin: China Planning: Japan.
  • Thin insertion type type semi-hard case excellent for carrying. A sense of luxury in the balance of base fabric and side color..
  • The outer part with the hook part protects the glasses from impact with a hard case, and the inner part fits gently with the body with a soft case..
  • Dimensions：about 6.1" long 2.6" wide & 1.2" thick. fits into a front pocket nicely （internal: 5.９ x 2.4 x 1.06 inch)..
Check Stock

Vegan Clogs, Handmade clogs, Vegan leather, Red Vegan Clogs, Swedish Clogs, Clogs for women, Clogs Shoes, Low Heel, Mules, Sweden

  • PROFESSIONAL CLOGS FOR WOMEN: The Professional PU style features a polyurethane-coated leather upper with a padded instep and a microfiber insole with an anatomically correct footbed. The polyurethane outsole features a rocker bottom. This style is approved by the APMA and part of our Professional Collection..
  • DURABLE, SHOCK ABSORBING OUTSOLE: Put some distance between your feet and those hard, concrete floors. Go from ouch! to ahh! with every step. Never feel cramped or squished. Lots of rooms for your toes here. Go ahead and wiggle them..
  • ARCH SUPPORT AND COMFORT: So comfy! A soft footbed adds cushioning, wicks sweat and provides arch-support that helps protect from foot and back fatigue. Give your feet a pep talk in the form of an anatomically correct footbed with arch support and say so long, foot fatigue!.
  • APMA APPROVED: Sanita Clogs are doctor approved! Our clogs have long carried the Seal of Acceptance from the APMA, meaning doctors recommended our clogs!.
  • EASY TO CLEAN: Polyurethane-coated clogs can easily be wiped down with soap and water or alcohol for a deeper clean..
Check Stock