Best Polybutylene Fittings

10PCS PBT Plastic Tubing Clamp 140 Degree Celsius Heat Resistant Adjustable Tube Clip Laboratory Industrial Flow Control Hose Clamp

  • Use for tube outer diameter 1/2''-3/4'' (12-18mm). And the tubes you use the clamp for must be flexible and the thickness of the tubes must be above 0.02 inch/0.5mm.
  • High Temperature Resistant Hose Clamps can be used at high temperature of not more than 140 degree Celsius: made from high quality heat resistant PBT plastic (polybutylene terephthalate),good elasticity, clamping force, and durable.
  • Tubing clamps are widely used in medical devices, laboratory instruments,chemical industry, beer brewing, wine making and etc..
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

Bosch Rexroth R928017253 Micro-glass Filter Element, Cartridge Type, 1.34\ ID x 2.72\ OD x 6.88\ Tall, 3 Micron (Absolute), Without Bypass Valve; Removes Particle Contaminants and Protects Hydraulic Systems

  • 003cb003ePrice For:003c/b003e Each 003cb003eConnection Type003c/b003e: Tube 003cb003eTemp. Range003c/b003e: 23 Degrees to 140 Degrees F 003cb003eBasic Material003c/b003e: Plastic 003cb003eColor003c/b003e: White/Gray 003cb003eBody Material003c/b003e: Polybutylene Terephthalate 003cb003eItem003c/b003e: Tube Cap 003cb003eMax. Pressure003c/b003e: 145 psi 003cb003eStandards003c/b003e: RoHS 003cb003eFittings Sub-Category003c/b003e: Caps 003cb003eTube Size003c/b003e: 5/32" 003cb003eCountry of Origin (subject to change)003c/b003e: Singapore.
Check Stock

Bimini Top 3-Bow/4-Bow Stainless Steel Boat Jaw Slide Cap Eye End Deck Hinge Fittings Hardware 16 Set 1 Inch

  • 4 BOW and 1'', Round Tube Bimini Top Kit with Stainless Steel Fittings.
  • 8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings.
  • Package : 16 Pieces in 1 Set, (WHAT YOU GET:8 x Eye End Fittings - Fit 1"； 6 x Jaw Slide Fittings - Fit 1''； 2 x Deck Hinge Fittings).
Check Stock

Storelli Gladiator Pro 3.0 Goalkeeper Gloves | Professional Soccer Goalie Gloves with Finger Spines | Superior Finger and Hand Protection | Black & Yellow | Size 9

  • TOP-TIER GOALIE GLOVES WITH FINGER SPINES: Reinforced pro-level soccer gloves for goalkeepers, armored with top-grade German Contact latex and 5 removable finger spines (including thumb). Features 2 gloves (1 pair) and a premium, breathable glove bag..
  • PROFESSIONAL-STRENGTH PROTECTION: Designed for competitive goalkeepers with heavy-duty impact protection and grip. Includes 3.5mm of the highest-grade German latex trusted by the pros and 3mm of impact-absorbing padding for maximum palm protection..
  • CUSTOMIZABLE FINGERS & SUPERIOR GRIP: Negative cut with roll thumbs (extra latex thumb wrap) ensure superior ball grip. Removable, ergonomic plastic finger spines prevent finger jams and backward bends while allowing for customizable comfort..
  • FLEXIBLE & SNUG: Full wrist wrap with double velcro touch point prevents bunching and enhances comfort and fit. Reinforced textured polybutylene punch zones maximize ball control..
  • BREATHABLE & SLEEK: Mesh panels ensure breathability between fingers for a dry performance in all conditions. New Pro 3.0 gloves feature a sleek design with neon yellow trim and Storelli branding. Fabric composition: Latex, Polyester PP, Nylon..
Check Stock

ABN Grease Fitting Tool - 4 Way Grease Fittings Tool Easy Out Zerk Fitting Tool for Damaged Grease Zerks and Fittings

  • SERVICE YOUR VEHICLE: Use the ABN 4-Way Grease Fitting Kit to install, remove, repair, and maintain zerk fittings in your vehicle, lawnmower, and other tools that use grease fittings.
  • This grease zerk tool kit even helps you remove damaged or broken grease fitting tabs.
  • 4 TOOLS IN ONE: Re-tap holes, install and remove fittings, and remove broken fittings with this four in one grease fitting removal tool.
  • Slotted grease fitting installation tool works with any straight, pin-type, or angled zerk including 30, 45, 65, and 90-degree angles.
  • FITS YOUR ZERK GREASE FITTINGS: Grease nozzle fitting greasing tool is suitable for 1/4 inch-28 and 6MM fittings, 1/4"-28 tap thread repairs, and 5/16-inch (7mm) and 3/8-inch (9mm) hex fitting and plug removals.
  • BUILT TO LAST: Constructed of heavy-duty metal ensures maximum strength and longevity.
  • 2-inch (5.1cm) T-design and a knurled body provides secure grip so you can install, rethread, or remove fittings easily.
  • EASY TO USE: Air grease gun accessories designed to clean out the threads of clogged fittings.
  • Grease zerk extractor grease fitting multi-tool features a built-in re-threader and extractor to help you remove worn and broken zerks and fittings.
Check Stock

MX Bimini Top Fitting Hardware Set Fit 7/8',Boat Jaw Slide,Cap Eye End,Deck Hinge(6pcs)

  • Bimini Top Fittings Hardware Set Black Nylon 6 PCS.
  • 7/8 inch tube bimini top fittings hardwares set.
  • Bimini fittings set included: 2 pcs nylon eye end cap fittings, 2 pcs nylon jaw slide fittings, 2 pcs nylon deck hinge fittings with screws..
  • Bimini top hardware made of durable black nylon.
  • The bimini top fitting kit easy to install,very convenient.
Check Stock

TIRDITY 3/4\ Pipe Fittings - 24 Pack 3/4 Inch Black Floor Flange Elbow Tee Combo | Malleable Cast Iron Vintage Furniture Grade Threaded Pipes for DIY Industrial Shelves, Pipe Shelving, Steampunk Decor

  • 【 3/4" INCH ELBOW TEE COMBO PACK 】Our industrial pipe fittings 3/4 malleable iron threaded elbow/tee combo/pipe flange pack provides you the great floor flange pipe fittings at a reasonable price. Malleable cast iron pipe fittings can decorate your home or store more elegant and functional..
  • 【 PIPE INDUSTRIAL DECOR 】You can use these black malleable pipe fittings to install durable iron frame for your pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, wall lamp or other industrial home decors. When you prefer an industrial, steampunk, vintage, retro, factory look, our decorative black pipe fittings are the way to go. Threaded pipe fittings are built to fit your household with an industrial, rustic style. Our black steel pipe fittings will definitely satisfy you..
  • 【 EASY TO INSTALL 】These metal cast pipe fittings are threaded, just screw the threaded rods or pipes to the tees and elbows and they will hold forever. No screws needed to install steampunk pipe fittings. Easy to install, no DIY difficulties to connect Pipe furniture fittings. You will love black iron pipe connectors..
  • 【 MATERIAL OF RAW IRON 】Since threaded metal pipes are unprocessed cast iron parts, we strongly recommend you to clean and seal each part of bl....
Check Stock