Best Poe Pd Module

Roland TD-50KV2 V-Drums Electronic Drum Set

  • Drum Sound Module (TD-50X) - Snare Drum (PD-140DS) - 2x Tom1 and Tom2 Drums (PD-108-BC) - 2x Tom3 and Tom4 Drums (PD-128-BC) - Hi-Hat Cymbal (VH-14D) - 2x Crash1 and Crash2 Cymbals (CY-16R-T) - Ride Cymbal (CY-18DR) - Kick Drum Pad (KD-180) - Drum Stand (MDS-STG2) - MDH-STG2 - Connection Cable (Tom4) - Setup Guide - Roland 1 Year Limited Warranty.
  • Flagship electronic drum kit with Roland's most advanced V-Drums innovations.
  • Next-generation TD-50X sound module with Prismatic Sound Modeling and PureAcoustic Ambience technologies.
  • 14-inch PD-140DS digital snare, 18-inch CY-18DR digital ride cymbal, and newly developed 14-inch VH-14D digital hi-hat, all with high-res, multi-sensor triggering for unmatched performance.
  • Two PD-108-BC rack tom pads and two PD-128-BC floor tom pads.
Check Stock

24 Port Gigabit Ethernet PoE Switch with 2 Uplink Gigabit Port & 2 SFP Port, YuanLey Unmanaged 24 Port PoE+ Network Switch, Rackmout, Build in 400W Power, Support 802.3af/at, Plug and Play

  • 【28 Port Gigabit PoE+ Switch】Total Max 400W internal power budget, up to 30W per PoE port, add-on 2 gigabit uplink port, 2 SFP port. IEEE802.3af/at compliant, automatically detects and identifies PD devices.Support AI Watchdog intelligent detection. Automatically restart the disconnection devices to make operation and maintenance more easier..
  • 【VLAN Switch】PoE ports will be isolated respectively but can communicate with uplink port,Better Network Bandwidth up to 56 Gbps with higher Security. Ideal for PoE IP Camera, EAP, Access Point, IP Phone and other PD devices..
  • 【6KV Lightning Design】Protect the product and equipment not be damaged even in bad weather. Sturdy Metal Housing supports Desktop or Rack Mount in many different usage scenarios..
  • 【Unmanaged Plug-and-Play】Easy to use and simple set up with no software or configuration needed. Supports auto MDI/MDIX and Non-Blocking Data Forward..
  • 【Customer Service&Technicoal Support】PoE switches are rigorously tested for reliability, quality, and performance. We supply a year warranty for whole products and lifetime technical support..
Check Stock

Netis Combo-Port Gigabit PoE Switch Max Output 140WTP & SFP Shared Interfaces (PE6310)

  • 8 10/100 Mbps Ethernet ports, 210/100/1000 Mbps Ethernet ports supporting both copper and SFP connections.
  • Supports PoE power up to 30W for each PoE port, 140W for all PoE ports.
  • Supports PoE IEEE 802. 3at/aft compliant Powered Device (PD).
  • Complies with IEEE 802. 3at/aft standards.
  • Intelligent Power Management, Support configuration port power priority.
Check Stock

Edimax GS-5416PLC Long Range 16-Port Gigabit Poe+ Web Smart Switch with 4 Rj45/Sfp Combo Ports,Up to 30W per Port Total Power Budget 330W for powering PoE-Enabled Devices,Supports SNMP v3

  • 16 Gigabit Ethernet ports and four RJ45/SFP combo ports.
  • Up to 30W per port (total power budget: 330W) for powering PoE-enabled devices.
  • Auto-detection of powered devices (PD) and Power consumption levels.
  • Poe powered devices (PD) alive check to enhance the reliability of the network.
Check Stock

BV-Tech 10 Port PoE/PoE+ Switch (8 PoE+ Ports | 2 Gigabit Ethernet Uplink) – 96W – 802.3af/at| POE-SW811

  • 8 PoE+ Ports at 10/100Mbps each, 2 Uplink ports at 10/100/1000Mbps each.
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-8 up to 30W per port, which is better than normal PoE port that can only provide 15.4W per port..
  • PD detection will automatically detect and provide required power for your PoE devices **Note: Do not support passive PoE device**.
  • 100% Satisfaction Guarantee – 30-day Money-Back Guarantee with 1 Year Warranty and Lifetime Tech Support.
Check Stock

ThePoEstore 60W Gigabit PoE Injector Up to 60W Ultra Power Supply 10/100/1000Mbps IEEE 802.3at/802.3af Compliant Plug & Play

  • 1 CH Gigabit Ethernet port input and PoE+ Gigabit Ethernet port output offer full duplex 2Gbps Ethernet speeds..
  • Auto-sensing technology delivers up to 802.3at 60W to a PoE+ device with backwards compatibility for 802.3at(30w) and 802.3af PoE (15.4W) devices. Not....
  • Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away..
  • Use PoE Injector with PD to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or....
  • LED power input indicators for and PoE output,Internal AC/DC converter no need for external power brick ,Easy plug-and-play installation..
Check Stock

POE IP Camera POE Network Camera ModuleBlueFishcam IP Security Board Camera for DIY/Repair/Upgraded (2MP, 3 Lenses)

  • 2MP 1080P POE IP board Camera network Security camera module 2.8mm,3.6mm & 6mm fixed lenses Hidden Camera Indoor Security Surveillance Motion Detection for DIY/repair/upgrade.
  • Advanced H.265X/H.264 video compression,Super low rate,high definition quality of image.
  • Support various mobile monitoring(iPhone,Android).
  • Support POE IEEE8023af/at, And it's with additional assisted power supply. Power supply required: 12V 2A or above 2A.
  • Package content: 1 piece of POE mini IP board camera/network camera module..
Check Stock

YIDUOYUNCAI 6 Port PoE Switch (4*100Mbps PoE Port+2*100Mbps Uplink Port),78W,802.3af/at,VLAN,Metal Fanless,Unmanaged Plug and Play

  • 【6 Port PoE+ Switch】4*10/100Mbps PoE+ Ports(802.3at/af)&2*10/100Mbps uplink, power budget up to 30W per PoE port and 78W for the whole..
  • 【Extend Mode】When Extend Mode is enabled, the transmission distance of POE ports can be extended to 250m at transaction rate of 10M..
  • 【Active poe switch with 802.3af/at compliant】Poe switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter..
  • 【AI PD Detection】The poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device..
  • 【Plug and Play】6 Port Unmanaged Network Switch Support automatically detect devices,easy to setup with no software installation or configuration required..
  • 【Fanless design】The fanless design makes poe switch work without any noise..
  • 【Network cable short-circuit protection mechanism】POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the ....
Check Stock

BV-Tech 6 Port PoE+ Switch 4 PoE+ Ports with 2 Ethernet Uplink and Extend Function – 60W – 802.3at + 1 High Power PoE Port| Desktop Fanless Design | Sturdy Metal Housing

  • 4 PoE+ Ports and 2 Ethernet Uplink Ports at 10/100Mbps each, making network setups easier and more convenient..
  • Hi-PoE at port 1 providing up to 60W single port, PoE+ at port 2-4 up to 30W per port, which is better than normal PoE port that can only provide 15. 4W per port. 60W Max Total Power (includes 60W DC adapter)..
  • Extend function extending max PoE transmission distance from 100 meters to 250 meters.
  • PD detection will automatically detect and provide required power for your PoE devices **This is a 48V active PoE, NOT compatible with Ubiquiti devices which require 24V Passive PoE. **.
  • 100% Satisfaction – 30-day Money-Back with 1 Year Warranty and Lifetime Tech Support.
Check Stock