Best Pneumatic Waste Oil Extractor

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....

Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....

Check Stock

6.0 Liter Brake Pump Pneumatic Fluid Oil Extractor Stainless Steel Oil Change Vacuum Fluid Extractor Pump for Any Vehicle Fluid Change Tool No Leaks Oil Extractor Pump

Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not....
Easy to Operate: The pneumatic way for higher speed of oil change.
just need to connect with air compressor. Easy to do the oil / fluid changing for....
Vehicle Fluid Removal Tool: At 6 liters of capacity, this fluid-extractor pump can be used for oil and fluid changes on most light and heavy duty....
Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid....
Included components: Fluid Extractor 60" (1.5M) PVC Steel Braided Suction Hose 3/8" (9.5mm) x 17" (430mm) Dipstick Tube, 3/8" (9.5mm) x 30" (750mm)....

Check Stock

EONLION 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Gear Gearbox

Function-10L capacity pneumatic air suction pump will help you quickly change (pump/distribute) the vehicle's ATF oil..
Why Need It- Pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. The consistent conversion of the 2-way control valves (blue screw valve and air inlet ball valve) on the pump assembly to achieve the conversion between extracting and dispensing, very easy..
Advantage- Fluid extractor can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess..
Simple Operation-load more fluid at once. Pneumatic operation, easy to suck or pump oil. Equipped with pressure gauge (0-80 psi/0-6 bar), which can accurately read data..
Fitment- Suitable for a variety of models, such as compatible with Audi/Benz/BMW/Ford/Mini Cooper/Honda/Hyundai/Infiniti/Kia/Lexus/Nissan/Skoda/Toyota/Porsche/Volvo/Volkswagen DSG/Volkswagen CVT..

Check Stock

JoyFans 10L Pneumatic Transmission Fluid Pump Extractor and Dispenser, Gearbox Oil Transfer System Refill Fill Evacuator Tool Kit with 15PCS ATF Adapters for Most Garage Shop Vehicles

...l, power steering fluid, engine oil, gearbox oil, lubricating oil, brake fluid, coolant, etc. If it's used for ATF oil, 15 optional ATF adapters are well kept in a blow-molded case at your fingertips. All parts in this fluid evacuator and dispenser tool set are designed to transfer fluids fast and safely..
Handsfree Pneumatic Helper: This transmission fluid pump will keep you away from boring laborious manual work with air compressors. Two-way extractor & dispenser tool saves energy and time.
Don't even need to pour oil manually! You only need to switch the extract or dispense mode and buckle the self-locking device. Large capacity avoids the trouble of repeated refueling and satisfys refueling needs of multiple vehicles at once. Quick and sparkless..
3PCS 1M Hoses: O.D. 6mm 8mm 10mm. Connect both ends of the 80'' hose with quick coupling to pump and the selected nylon hose first. They make the pump more suitable for various makes and models. The blue knob must be consistent with the air control switch valve: Extract or Dispense. The 1M nylon hose can be inserted into the car oil container or dipstick hole directly to extract waste oil for recycle and dispense the new oil for refilling. No need to jack up the vehicle and crawl under it.

Check Stock

EWK Patented 6.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the....
【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other....
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to....
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable....
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast....

Check Stock

SUPERFASTRACING Oil Fluid Extractor 7L Manual Vacuum Fuel Petrol Pump Transfer Syphon Suction

【 Work Freely 】 Portable 6 liters sturdy and lightweight extractor pump for changing fluid. Simple manual operation requires no other equipment to use with. Perfect for carrying around to complete various fluid extraction jobs..
【 Easy to Use 】 Create vacuum and powerful suction by pumping the handle, makes it quick to empty fluids in your equipment. The special extra-wide base designed allows you to step on it to stabilize the tank while pumping. Built-in capacity marker for easily tracking the progress..
【 Hominization Design 】The 59 inch transparent main tube makes checking oil quality easier, and the 42 inch suction probe is made of flexible metal for easily slide into the bottom of oil pan. Sealing cap to keep the tank well-sealed and safe. Pour spout makes it fluent to dump the waste fluid without spilling..
【 Wide Applications 】 EWK oil extractor is designed to drain old fluids from cars, motorcycles, lawnmowers, marine engines, watercrafts, stationary engines and industrial machinery. It's also works perfectly for low viscosity fluids such as trapped water or coolant. *Note: Gasoline, and fluid with high volatility, high corrosion, high alkalinity, high temperature are FORBIDDEN to be applied on the extractor..

Check Stock

3L Manual Transmission Fluid Pump Oil Filling Filler System Fluid Transfer Pump Tool with Adapters

◇ Use to dispense and extract the ATF fluid of vehicles. Provide with pneumatic operation. With volume guide for controlling fluid more easily.
◇ Car fluid pump transmission fill kit includes a 3-liter fluid container with pump handle lid, a pressure gauge, a pressure-release cap, a tube and 8 transmission fluid adapters for the most common vehicles.
◇ With an air compressor, the pump extract fluids in minutes. The 3L pneumatic fluid extractor ensures high extraction speed and automatically dispenses.
◇ This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
◇ Applicable to common car brands in the market, please see the picture for specific applicable car brands.

Check Stock

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum housing and gerotor gear design, our oil extractor pump ensures long life and minimal maintenance. With the rugged 230/115-volt AC motor, our oil pump delivers a flow rate of 8 GPM or 32 QPM (30L/min)..
HEAVY-DUTY OIL PUMP: The L5132 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. Our high viscosity pump is highly productive when used to pump drums, bulk tanks, waste oil reserves, and other oil containers. Modeled to fit easily to a barrel or drum, this oil extractor quickly transfers all incombustible liquids!.
EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long....

Check Stock