Best Plywood Kitchen Cabinet

20'' Width Drawer Organizer Roll Wood Tray Kitchen OrganizerDrawer Box, Cabinet Slide Out Shelve Pull-Out Shelf, W/ Wood Spacer Pantry Organization Storage (Fits RTA Face Frame Cabinet B24, Pantry 24)

  • Checking Interior Dimension:---To properly install, the minimum cabinet opening width should be 21 inch, and minimum interior depth of cabinet should be at least 21.25 inch. This Pullout Drawer Box Actual Width is 20 inch. Drawer slider width total are 1 inch. Fit Ready to Assemble face Frame Cabinet B24. each order is One Single set..
  • Need Assemble: ---Shipped "NOT ASSEMBLED" But is very easy, DIY assemble Drawer box just need 3-5 minutes. No Nail and Glue Necessary. Each order is One Single set. This Cabinet Pull Out Tary is Good for Pantery, Vanties, Under sink..
  • Natural Wood Finished:---The Kitchen Drawer Organizer Is Dovetail Joint Drawer Box, Each order is One Single set..
  • Solid Wood:---This Pull Out Drawer Has 5/8" Thick Solid Wood, and Super Strong 1/4" Thick Plywood Bottom..
  • 35mm Slider:----This Roll Out Drawer for Cabinet Include 20 Inch Full Extension Drawer Slides ( Side-mounted).
Check Stock

Sunset Trading Shades of Gray China Cabinet, Weathered Grey

  • ✔ feet carry the recessed channel to Complement the table | crafted from kiln-dried solid oak and Birch veneer | French Dovetailed drawer fronts | English Dovetailed drawers open smoothly on waxed wood Glides with drawer stops for safety | dust cover on bottom of case.
  • ✔ stained Luan Mahogany plywood back that recesses into the case securely with screws | drawers constructed of seven-ply furniture grade plywood, Sanded and lacquered | Anti-tipping device provides safety for your loved ones and pets | each cabinet has one non-adjustable 1.8” Smooth edged Glass shelf with solid wood support divider between | factory installed Glass door inserts with rubber gaskets.
  • ✔ Dimensions: overall: 62"h x 19"D x 52"W | drawers (4): 9"H x 14.75"D x 18.25"W | cabinet interior (without shelf): 29.5”H x 16.75”D x 47.5”W | bottom cabinet area: 14.25”H x 16.75”D x 47.5”W | Top cabinet area: 15.25”H x 16.75”D x 47.5”W | Glass doors (2): 28.5"H x 1"D x 21"W | nouveau-style square turned and tiered solid wood bun feet: 5.5"H x 2-4.5"D x 2-4.5"W | weight: 142 lbs..
Check Stock

Fpz-bd 50 Pcs Shelf Support Pegs, 5mm L-Shaped Support,Cabinet Shelf Bracket Peg with Hole,for Kitchen Furniture Book Shelve (Nickel)

  • DURABLE--- L-Shaped design which made them hardly noticeable and prevent shelf wobble, it make the board sturdy enough to keep level and stable. Solid polished nickel metal, anti-rust, smooth surface does not hurt your hands,which is durable, not easy to loose and wear, and has long service life..
  • APPLICATION--- Shelf Support Pegs used on Furniture, Shelves Supplies, wine cabinet, display cabinet, bookshelf, closet, shoe cabinet , Kitchen, solid wood plywood plastic ,glass plate, and so on..
  • SIZE--- Pin Diameter: 5mm, Pin Depth: 9mm, Shelf Bracket Length: 19mm, Width: 13mm, Total Length: 29mm.
  • INSTALL--- Easy to install, the 5 mm shelf pin is used to support the shelf on any project, and the shelf hole is 5 mm. and each pin will have a 4mm hole to fix the shelf. (Excluding Screws).
  • TIPS--- As the object is small, please place it out of reach of children and pets..
Check Stock

26'' Width Drawer Roll Wood Tray Drawer Box Kitchen Organizer Cabinet Slide Out Shelve, Pull-Out Shelf, Pantry Organization & Storage w/ Sliders-- DIY Project (Fits RTA Face Frame B30 and Pantry30)

  • Checking Interior Dimension:--- This drawer box is 26'' wide and requires 27 inches of space for installation, because the slide rails must be installed on both sides of the drawer. This Roll-out Drawer Fit Ready to Assemble face Frame cabinet B30. Or you can contact the seller directly via Amazon Messages to determine if the size is right for your cabinet..
  • D.I.Y (Need Assemble): ----Shipped "NOT ASSEMBLED" But is very easy, DIY assemble Drawer box just need 3-5 minutes. No Nail and Glue Necessary. Each order is One Single set. This Cabinet Pull Out Tray is Good for Pantry, Vanities, Under sink..
  • Natural Wood color Finished:----The Kitchen Drawer Organizer Is Dovetail Joint Drawer Box. Each order is One Single set..
  • Solid Wood:----This Pull Out Drawer Has 5/8" Thick Solid Wood, and Super Strong 1/4" Thick Plywood Bottom..
  • 35mm Slider:----This Roll Out Drawer for Cabinet Include 20 Inch Full Extension Drawer Slides ( Side-mounted).
Check Stock

Rev-A-Shelf 4WLS201-22-BS52 22 Inch Wooden D Shape Lazy Susan Turntable Storage Organizer with Swivel Bearing for Upper Corner Kitchen Cabinets

  • EASY ACCESS TO KITCHEN ITEMS: Easily access pots, pans, dishes, kitchen gadgets, and food with this wooden, D-shaped lazy susan.
  • DURABILITY & ELEGANCE: Designed with Maple wood construction with a clear coat finish for durability.
  • MADE FOR UPPER AND CORNER KITCHEN CABINETS: Great fit for upper and corner kitchen wall cabinets thanks to its D-shape that turns inside your cabinet to display your items.
  • High quality construction and the durable rotating hardware makes installation easy and simple..
  • DIMENSIONS (W x D x H): 22"W x 22"D x 2.38"H.
  • Flat portion measuring 16.63 inches wide.
  • Weight Capacity: each lazy susan shelf can hold up to 20 pounds per square foot.
  • Plywood finger joint rim with 5/8 inch thick bottom.
  • INCLUDED: 1 wood d-shaped shelf with rotating bearing/stop attached.
Check Stock

Pioneer Pro DJ Powered Speaker Cabinet, 12-Inch (XPRS12)

  • The 15-mm birch plywood cabinet, 10-inch ferrite LF driver, and 1.75-inch titanium diaphragm compression driver reproduce a clean, full-range sound with low distortion.
  • The acoustic tube in the cabinet absorbs only the standing waves, increasing the low-to-mid frequency response.
  • The durable, birch plywood enclosure keeps your PA speaker safe, while carefully placed handles take the hard work out of transit and set-up.
  • Adapt to a variety of genres and environments using the rotary selector switch on the back of the speaker to give you instant access to 4 EQ modes: Flat, Bass +, Speech, and Wedge.
  • Packed with features to protect the drivers, amp, and power supply, giving you peace of mind, consistent, high-quality sound, and extending the life of your sound system.
Check Stock

Rev-A-Shelf 4WLS072-18-52 18 Inch Wooden Full Circle 2 Shelf Spinning Lazy Susan Turntable Storage Organizer for Upper Wall and Corner Kitchen Cabinets, Maple

  • EASY ACCESS TO KITCHEN ITEMS: Easily access pots, pans, dishes, kitchen gadgets, and food with this wooden, 2-tiered full-circle Lazy Susan.
  • DURABILITY & ELEGANCE: Designed with Maple Wood construction with a clear coat finish for durability.
  • MADE FOR WALL AND CORNER KITCHEN CABINETS: Great fit for upper wall and corner kitchen cabinets thanks to its full-circle shape that fully spins inside your cabinet to display your items.
  • High quality construction and the durable rotating hardware makes installation simple..
  • DIMENSIONS (W x D x H): 18 x 18 x 26 inches.
  • Designed for blind corner cabinets with a framed opening at least 18 inches wide.
  • Capacity: Each shelf can hold up to 20 pounds per square foot.
  • Plywood finger joint rim with 5/8 inch thick bottom.
  • INCLUDED: Includes 2 Shelf Wood Full-Circle set with telescoping shaft and mounting hardware.
Check Stock

ECR4Kids Birch 3-2-1 Cube Storage Cabinet 6-Compartment Wood Bookcase Kids Wooden Shelf Tiered Organizer Multi-Level Toy Shelf Modular Storage Shelves Durable Birch Toy Display - Natural

  • HOME OR SCHOOL STORAGE: The Birch 3-2-1 Cube Storage Cabinet is a perfect school or home-based storage solution for kids to keep toys, games and books....
  • SUSTAINABLE WOOD FURNITURE: The storage cabinet is constructed from sustainably harvested birch plywood with a tough, scratch-resistant, easy to....
  • DURABLE DESIGN: Birch plywood is extremely durable due to the layers (plies) of birch wood manufactured together.
  • CERTIFIED SAFE: Rated GREENGUARD [GOLD] for low VOCs, TSCA, and CPSIA Compliant.
  • PRODUCT DIMENSIONS: The cabinet measures 41.3" L x 16" W x 36" H.
  • shelf dimensions are 13" L x 15.75" W x 9.7" H. 2" top lip for additional display on....
Check Stock

DBoyun Shaker 3 Bits Ogee Rail and Stile Raised Panel Cabinet Door Router Bits Set with 1/2\ Shank

  • ※ Basic Information-- 1/2" shanks and Premium C3 micro-grain tungsten carbide blades, Create rail and stile cabinet door frames for a sharper & longer lasting edge. Router bit cutter material is YG6 Solid Hardened Steel..
  • ※ Overall design--TAIWAIN router bits use on CNC and other automatic table-mounted portable routers. Solid hardened steel bodies with Anti-Kickback Design, Carbide cutters. Perfect for woodworking, edging, trimming, grooving, veining wood projects..
  • ※ Suitable--Works great with all kinds of materials and surfaces, like woods, mdf, particle boards, plywood, panels, softwood, hardwood and many others. However, please avoid to cut steel, iron and sand， and stay away from water..
  • ※ Use--Enhance your hardwood working performances and create beautifully handmade furniture on your own. Great for kitchen and bathroom doors, office cabinets, flooring tables, bedroom shelves, walls and more..
  • ※ Materials Analysis--TAIWAIN tools using high-grade YG6X original alloy. High abrasion resistance, high-precision grinding technology. they can create rail and stile cabinet door frames.Skyrocket your DIY woodworking arts and crafts with the tools..
Check Stock