Best Plunge Cutting End Mills

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....

The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
Long service life, Decreasing the times of changing cutters,Saving production time.
Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.

The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
Long service life, Decreasing the times of changing cutters,Saving production time.
Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.

APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
Used for slotting and peripheral milling.

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....