Best Plumbing Valves

PLUMB eeze Brass Pressure Relief Valve Set @ 75 PSI for Water Well Pressure Tank, 3/4"

  • PRESSURE RELIEF VALVE – 3/4″ Line Connection, 75 PSI.
  • FOR COLD WATER ONLY – Pressure relief valves are recommended for all cold water system installations..
  • PROTECTION – protect against damage to plumbing system, piping and pressure tanks. “.
  • DIMENSIONS – 3/4″” Male thread for screwing into tank/tank tee. 1/2″” female thread for accepting plumbing running to drain. “.
  • LEAD FREE – Made from lead-free brass..
Check Stock

SharkBite PEX Crimp Ring Removal Tool, 1/2, 3/4 and 1 Inch Copper Crimp Rings, Orange Handles, Plumbing Fittings, 23055

  • SHARKBITE CRIMP RING REMOVAL TOOL: This SharkBite plumbing tool removes copper crimp rings from brass or poly crimp connections for fittings to be reused.
  • has 200 lbs of crimping force and features a 6 inch handle.
  • COMPATIBILITY: This plumbing disconnect tool works with 1/2 inch, 3/4 inch, and 1 inch copper crimp rings.
  • EASY TO USE: This intuitive SharkBite crimp ring removal tool allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • ...d and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operating pressure of up to 45 PSI. Constructed to be wear-resistant to assure long term reliability of connections. Confidently install these barbed fittings without clamps by using our Valve Sizing Chart (see photo) to get the perfect fit. Match the ID (Inner Diameter) of your hose or tube with the acceptable IDs listed on the chart..
Check Stock

Watts Premier WP116187 Top Mount Twist Air-Gap Monitored Faucet, Brushed Nickel

  • TUBING SPECIFICATIONS: 1/4 inch Blue tube approximately 4 feet in length for connecting drinking water, 1/4 inch Red tube approximately 4 feet in length for connecting to the air gap of the faucet, and 3/8 inch Black tube approximately 3 feet in length for the connection to the drain.
  • PLUMBING CODE: This Faucet requires access to a drain connection. The Faucet conforms to all US Plumbing Codes. US Plumbing Code (5-202.13 Backflow Prevention, Air-Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch)..
  • See attached installation manual in the Technical Details section.
Check Stock

Moen Commercial Chrome Posi-Temp Pressure Balancing Shower and Handshower Trim, Valve Required, T8342

  • VERSATILE DESIGN: Chrome finish is highly reflective for a mirror-like look that works with any decorating style.
  • VALVES REQUIRED: This trim kit requires Moen valves # 8731HD, 2590, 2520, 2570 or 2510 and # 3360 to complete installation.
  • LONGSTANDING FLEXIBILITY: Built on the Moen M-PACT common valve system, allowing you to update the faucet style in the future without replacing any plumbing.
  • PRESSURE BALANCING: Posi-Temp valve (sold separately) helps maintain water pressure and temperature even when other water sources are in use.
  • ADA COMPLIANT: Complies with Americans with Disabilities Act (ADA) specifications.
  • CONTAINS: stationary showerhead, hand-held shower with non-positive pause, 69" metal hose, 30" slide bar, drop ell,.
Check Stock

briidea Pool Check Valve 2 inch for Swimming Pool Pond Spa Replacement Kit

  • DURABLE MATERIAL: Check valves for 2'' plumbing have excellent flow characteristics, constructed of durable ABS+PVC material, anti- corrosion, provides a lifetime of superior performance.
  • EASY INSTALLATION: Installed at the pump outle, prevent water bckflow from damaging pump impeller, or pollution filtration equipment.
  • TRANSPARENT AND VISIBLE: Clear lid with red seal for easy inspection. The inside of the valves can be easily monitored and problems resolved easier if there is a valve problem. Easy to clean.
  • WIDE APPLICATION: Suitable for swiming pool, pond, spa sauna pool and bathing pool. High reliability, a practical accessory using in swimming pool. NOTE: The direction of the marking arrow of the valve must be consistent with the direction of water flow.
  • PRODUCT GUARANTEE: You can enjoy our first-class service with free refund without reason, 2-year warranty and 24-hour support for customer service.
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.(NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

SharkBite 1 Inch Ball Valve, Push to Connect Brass Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 22223-0000LFA

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: Brass SharkBite Ball Valve plumbing fittings fit Copper, plastic PEX tubing, CPVC and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit.
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

JR Products 62255 3-Way Brass Diverter Valve - 1/2

Check Stock