Best Piwis Tester Pc

JoyFans Cylinder Leak Down Tester Kit Tu-21 Small Engine Combustion Leakdown Detector with Compression Gauge Spark Plug Adapters for Pressure Leakage Test on Automotive Motorcycle Car Blue

  • Air-compressed Work: This pneumatic cylinder leak down tester tool needs power support from air compressor (not provided in this package) within the....
  • Dual Detections: Cylinder leak tester tool approves cylinder pressure test for use in conjunction with cylinder leakproofness detection. Reading from....
  • Wide Coverage: It is not just as a compression tester. There is 1pc 10" rubber hose and 2pcs aluminum adapters besides the combustion leak tester. The....
  • Easy Usage: Install the 10" hose onto the cylinder pressure gauge manifold through quick disconnect system, M10 or M12 metal adapter can also be added....
  • Considerate Service: We are always glad to offer customers satisfactory shopping experience and after-sales services. We have 30-day free return for....
Check Stock

Computer PC Power Supply Tester 20/24 4/6/8 PIN for ATX, ITX, BTX, PCI-E, SATA, HDD, IDE with Aluminum Alloy Enclosure 1.8' LCD ATX Power Supply Tester

  • 【ATX Power Supply Tester】SAMFINTON computer power supply tester support 20-pin / 24-pin / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors..
  • 【Aluminum Alloy Enclosure】Nice thermal conductivity & corrosion Resistance,with a high  strength housing. The computer power tester is more durable than the plastic case on the market..
  • 【Practical PC Power Tester】The 1.8inch LCD display intuitive and accurate display outputted Voltages (+/-0.01V), automatic fault alarm..
  • 【Normal】Turn on the power supply, will hear “DiDi” ring, If all groups of data are not flashing, the power supply output voltage is normal..
  • 【Faulty】If a certain voltage signal is not detected, or the detected voltage value exceeds the normal value, a long “beep” buzzer will be emitted.
  • if the corresponding voltage value or PG also flashes, it indicates a fault..
Check Stock

TopDiag BT200 Car Battery Tester, 12V 24V Load Tester, 100-2000 CCA Automotive Charging Cranking System Tester Digital Auto Battery Analyzer for Car Truck Motorcycle SUV Boat (BT200)

  • [12V & 24V Automotive Car Battery Tester]➤ TopDiag BT200 Car Battery Tester can test all 12V & 24V 100-2000 CCA batteries , Compatible with the following Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB battery types. This battery load tester supports battery health test, state of charge test, car charging start system test, alternator tester and other functions. Lets you quickly diagnose the condition of your car..
  • [Fast & Accurate Detection]➤ The digital battery tester automotive has a built-in millisecond level custom integrated chip and uses advanced conductivity technology to directly present the battery's state of health (SOH), state of charge (SOC), test result display value with actual voltage, rated CCA value, measured CCA value, and resistance value in a digital display. It only takes 3 seconds to display the test results with 99.6% accuracy..
  • [Battery & Cranking & Charging & Wave Test]➤ Compared with other automotive battery testers, this car battery analyzer has added 1 more mode, and there are 4 test modes in total. The battery cca tester can not only test the startup of the starter system, but also monitor the ba....
Check Stock

EBC-A40L Battery Tester Battery Capacity Tester with Charge Discharge Function Large Current Lithium Battery Charge Dischage Capacity Tester 110V

  • ☀️ EBC-A40L is a high-current battery charge and discharge capacity tester for 5V battery and performance testing, through the online software with more extensions.
  • ☀️ Voltage accuracy: 0.2% ± 0.03V. Current accuracy: 0.2% ± 0.01A.
  • ☀️ Voltage range: charge 0-5V, discharge 0-5V. Current range: charge 0.1-40A, discharge 0.1-40A.
  • ☀️ Connecting pattern: Testing connector and PC connection(The EBC-A40L tester can connect with a computer through a designated USB-TTL cable).
  • ☀️ Package included: - 1 x Battery Tester - 1 x Online cable - 1 x Testing cable - 1 x Power supply cable.
Check Stock

HOJILA Digital Surface Roughness Tester SRT-6200 Surface Roughness Gauge Profilometer Gauge Ra 0.05~10.00µm/1.000~400.0µinch Rz 0.020~100.0µm/0.780~4000µinch

  • This surface roughness tester is compatible with four standards: ISO, DIN, ANSI, and JIS.
  • This surface roughness tester uses USB/RS-232 data output to connect to a PC.
  • Small in size, light in weight and easy to use.
  • This surface roughness tester is a highly precise inductive sensor.
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
  • ✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
  • professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
  • ✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....
Check Stock

AMTAST Professional Surface Roughness Tester Metal Surface Roughness Gauge

  • The Surface Roughness Tester AMT211 complies with international standards ISO, DIN, ANSI, JIS. Users-friendly system and intuitive menu navigation, Multi-direction measurement such as lateral and upsid..
  • Sensor can work in the meter, also can work independent through 1.0m length cable (Max can be 3m)..
  • Affordable Touch screen & button operational Surface Roughness Tester. Roughness parameters: Ra ,Rz, Rq, Rt, Rp ,Rv, R3z, R3y, Rz(JIS), Rs, Rsk, Rsm, Rku, Rmr, Ry(JIS), Rmax, RPc, Rk, Rpk, Rvk, Mr1, Mr2, resolution 0.001 micron. With bluetooth, also can by app to connect with mobile phone..
  • Calculation results, assessed profiles, bearing and amplitude curves can be displayed. DSP chip controlled achieves high accuracy and fast testing speed, easily connected to PC & Printer.
  • Wide Application: This portable Surface Roughness Tester allows surface roughness measurement both on metal and non-metal workpieces. It is suitable for machining and manufacturing, quality control, inspection departments, especially for measurement on large and heavy workpiece, assembly line on site. The AMT211 is a Non Destructive Testing instrument, damage won’t be caused when testing piece..
Check Stock

LeTkingok EBC-A40L Large Current Lithium Battery Charge Dischage Capacity Tester, 5V 40A Fe Battery Cyclic Tester (EBC-A40L)

  • EBC-A40L is a high-current battery charge and discharge capacity tester for 5V battery and performance testing, through the online software with more extensions..
  • The EBC-A40L tester is designed to charge and discharge batteries within 5V at a large current,the maximum current it supports is 40A in charging and 40A in discharging..
  • Connecting pattern: Testing connector and PC connection(The EBC-A40L tester can connect with a computer through a designated USB-TTL cable).
  • Setting examples: Discharge setting (discharge the Lithium battery from 3.7V to 2.8V at 5A).
  • Charge setting (charge the Lithium battery from 3.7V to 4.2V at 2.5A, cut-off current is 0.11A).
  • Setting examples: Auto test setting (charge the 3.7V Lithium battery at 2.5A and discharge it at 5A, waiting time is 5 minutes).
Check Stock

OTDR Tester 1310/1550nm 22/20dB 60km Multi-Function Fiber Optic Tester Tool with OTDR VFL OPM and OLS Functions with SC FC ST LC Adaptors

  • High Precision 4 in 1 Smart Single Mode OTDR Tester -- OTDR: 0-60KM.
  • OLS: 1310/1550nm. Dead Zone of Reflection Event: 2m.....
  • User-friendly UI and 4-inch Touch Screen Design – this OTDR tester adopts One Key Operation concept with user-friendly UI design, together with....
  • Large Battery Capacity -- 7.4v Li-ion Battery 4,400mAh, around 5,000 times of measurements, ensures long working time and suitable for long time field....
  • Test Data Processing -- you can upload data to PC via USB port, further analysis or processing can be done via management software. Or you can save it....
  • Wider Application – with SC FC ST LC adaptors provided in the packing, this OTDR tester is suitable for engineer construction and maintenance fault....
Check Stock