Best Piping Tubing Fittings Machinery

INTBUYING Hydroponic 10 Holes Grow Kit Plant Growing System for Leafy Vegetables Horizonal-2 Pipes 1 Layer

  • WATER TIGHT Rubber Grommets: in connections of DIY hydroponic systems, dutch buckets, dripping systems, siphon aquaponic systems and irrigation systems….
  • LEAK-FREE SEAL: Donut-shaped Rubber Grommets help transfer water or nutrient solution from one reservoir to another one with tubing and barded fittings or piping and 3/4 Inch Vinyl Tubing.
  • DURABLE: periodically replace worn old ones in existing hydroponic systems to ensure air and water tight seals in your hydroponic systems.
  • 3/4 inch Donut Rubber Grommet also goes with SCH40 1/2 inch PVC pipes or pipe's outer diameter matches grommet's inner diamete.
  • The inner diameter of rubber grommet is 3/4" but the drilled hole on the bucket it fits into will need to be 1-1/8 inch.
Check Stock

CEKER 1/2 Npt Elbow Push to Connect Fittings 3/8 inch Tubing to 1/2 npt Airline Push Fittings 3/8 Push in Connectors Quick Connect Air Tube Fittings 90 Degree Pneumatic Fittings 2Packs

  • Type:3/8 Od x 1/2" Npt Thread Push to Connect Fittings.
  • Made of quality plastic and stainless steel.
  • 3/8 Od Air Fittings Fluid Admitted: Air, Water (No Freezing).
  • Working Temperature: 0-60°C | 32～140°F.
  • The 1/2 Airline Push fittings are available in various styles and models ,All models of push in connectors are designed to suit your pneumatic piping needs perfectly.
  • Easy to install to 3/8 OD tubing and removed, even can change the tube connector direction after installation easily,360-degree rotate freely.
  • The release ring of Pneumatic Air Tube 3/8 od Fittings conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

IWISS Angle PEX Crimping Tools Combo Kits for 1/2\ & 3/4\ Pex Crimp Rings with Go/No-Go Gauge with PEX Pipe Cutter Suits for All US F1807 Standards Copper Rings

  • All-in-One PEX Piping Tool Kit: IWS-1234C PEX plumbing kit is designed to make copper crimp ring and copper sleeves connections in sizes 1/2-inch to 3/4-inch. The tool set includes PEX crimping tool(1), PEX cutter(1), 1/2’’ copper crimp ring(20), 3/4’’ copper crimp ring(10)..
  • Patented Copper Crimp Ring: Annealed copper crimp rings are used to secure PEX piping to F1807 Brass or PPSU fittings. Designed for longevity and durability..
  • PEX Crimping Tool: Dual cavity plumbing PEX crimping tool for PEX Copper Crimp Rings 1/2" & 3/4". Allows for a one-handed crimp. Angle head design is useful for working overhead and in tight areas as it easily fits between joists. .
  • PEX Cutter: Shear cutter tool ideal for cutting tubing for water applications. Its spring-loaded handle opens easily so you can make multiple cuts quickly and accurately. Cuts through PEX tubings like butter..
  • Compatibility: Ideal for connecting copper crimp rings made to ASTM F1807 standard (Sioux Chief, Watts, Nibco and other brands) with crimp style brass and poly PEX fittings manufactured to ASTM F1807/F877 or F2159 standards respectively (Everhot, Nibco, Watts, Apollo, etc.)..
Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

  • SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
  • Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
  • Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
  • It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
  • this enhances the installation of the push connect fittings process in a narrow space.
  • These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....
Check Stock

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....
Check Stock

Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000

  • 40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700

  • 27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 14 Gallon RV Waste Black Water Holding Tank WT-1400

  • 14 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock