Best Pipe Fitting Crosses Over

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ✔【HIGH QUALITY MATERIAL】Pex crimp ring meets ASTM F2098 requirements that adopts 304 Premium Stainless steel material, which features sturdy and durable. Has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applicatio....
Check Stock

Universal Downspout to Drain Pipe Tile Drainage Adapter (Black, 2x3x3)

  • Our universal downspout tile adapters are perfect for making the transition from the downspout to your drain tile.
  • These adapters are slightly over sized for a 2x3 inch downspout to make it easy to slip the downspout in to fitting.
  • For use with black corrugated pipe, pvc schedule 40, sdr 28 & 35 sewer pipe.
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock

24 Pcs Cross Patch Sticker, Chenille Cross Iron on Repair Patches Adhesive Back Chenille Cross Patches Black Iron on Crosses for Clothing Applique Patches with Silver Glitters Border, 2 Sizes

  • ... projects, can be applied for jackets, hats, sweaters, jeans, shoes, socks, tops, shirts and so on, and are also suitable for decorating DIY crafts, art projects, backpacks and purses.
  • Glitter Border Design: these black iron on crosses for clothing come with shiny and glittering silver borders, stylish and delicate, fitting different colors and styles of clothes, adding charms for you and making you the focus of the crowd.
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

  • 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Check Stock

3/4 inch 3-Way PVC Pipe Fittings, PVC 3-way Fitting Connectors, Used for Building Furniture, Furniture Grade, White (12 Pack)

  • The 3/4-inch pipe fittings are made of high-quality PVC, with high plasticity, low temperature resistance, impact resistance and corrosion resistance. Furniture level, it has a higher manufacturing process than ordinary pipe fittings..
  • Furniture-grade PVC connectors are very suitable for DIY furniture, with smooth surfaces and tapered edges, you can use these PVC accessories to build any furniture you like..
  • Size: Fits 3/4 inch PVC pipe with an outer diameter of 1-1/16” or 1.050”.
  • Wide range of applications: These furniture-grade PVC pipe fittings are suitable for constructing swimming pool products, chairs, tables, shelves or garden supports, etc..
  • We sell the same series of DIY products, such as bottom brackets, tees, crosses, etc., which are convenient for you to make a series of DIY furniture. If you have any questions, You can contact us by email and we will help you at any time.
Check Stock