Best Pipe Corrosion

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

IIS 220V 240V 3KW Premium Quality Water Heater Thermostat Swimming Pool Thermostat SPA Bath Portable Pool Heater Electric Water Heater Thermostat Heater Pump

  • Suitable for pools up to 1000 gallons in coastal climates.Material: Metal.
  • NOTE:One interface is 50mm, the other port is 32mm, please note the size of the pipe before use..
  • Heating fit for thermostat liner material is 316 # stainless steel pipe and electric resistance,corrosion resistance (chlorine corrosion),and durable.
  • The product is easy to operate, provides a mechanical fit for thermostat switch, you can set the temperature of temperature technology.
  • The product is small, suitable for: hot tub & swimming pool equipment and it is easy to install in the bathtub at the bottom of the circulating massage pipe.
Check Stock

3 Inch 2 x Butt Joint Exhaust Band Clamp Sleeve Stainless Steel 2pcs

  • Universal butt joint band 3.0" exhaust clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. Aslo can be used to repair exhaust pipes..
  • Universal butt joint exhaust clamp fit for 3.0" OD pipe to 3.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Stainless steel clamp with great performance in anti-corrosion Stainless steel clamp with great performance in anti-corrosion.
Check Stock

220V 240V 3KW Electric Pool Water Heater for Above Ground Inground Pool,Upgrade Portable SPA Water Bath Heater Thermostat Swimming Pool Thermostat Heater Pump

  • Must Work with At Least 0.75HP Circulating Pump.Material: Metal.
  • NOTE:One interface is 50mm, the other port is 32mm, please note the size of the pipe before use..
  • Heating fit for thermostat liner material is 316 # stainless steel pipe and electric resistance,corrosion resistance (chlorine corrosion),and durable.
  • The product is easy to operate, provides a mechanical fit for thermostat switch, you can set the temperature of temperature technology.
  • The product is small, suitable for: hot tub & swimming pool equipment and it is easy to install in the bathtub at the bottom of the circulating massage pipe.
Check Stock

OhLectric OL-38707 High-Conductivity Ground Pipe Clamp - Made of Copper Alloy - Connecting Grounding Electrodes to Water Pipes Clamp - Non-Direct Burial Pipe Clamp - ½ Inch - 1 inch Pipe Range

  • ...maximum flexibility to suit your needs!.
  • MULTIPURPOSE: These pipe ground clamps are an excellent choice for either clamping the pipes to the grounding electrode or you can even use these clamps to securely mount the pipes on walls. It can also be used for connecting bare wires to pipes or steel water pipe or tubing..
  • CORROSION FREE: The ground clamp for pipe can be attached to the grounding electrode and the pipe by the means of indirect burial with the screws provided. To prevent rusting, the screws are coated with zinc plated steel alloys which totally eliminates the chances of corrosion on the clamps..
  • SAFETY TESTED: All our products are certified by Culus for their safety and specification standards set by them. We follow every step to ensure all the housing rules and regulations are followed as we value customer satisfaction and safety more than anything else..
  • ADAPTABLE FIT: These pipe grounding clamps come in a variety of sizes which are well equipped for all wire ranges between 2-10. And also they support all pipe sizes from the smallest ½ inch to 1 inch. The screw thread on the clamps also varies in size so you can select the clamp depending on your needs!..
Check Stock

Heidolph Temperature Sensor for Laborota 4003 Series Control Rotary Evaporator

  • Main structural parts made of corrosion-resisting Stainless steel, Long Using Life-span..
  • Transparent protective cover, heat preservation, saving energy, burst-proof, splash-proof, antirust, antiseptic..
  • Vertical condenser with feed-in pipe, big condensing pipe, big evaporating pipe, evaporating rate is more superior than rank instruments..
  • Evaporator is used for concentration, crystallization, separating and recovery biochemistry, organic chemistry, medical and experiment & scientific research of institutes and universities..
Check Stock

Exhaust Muffler 1.5-2"Inlet Removable DB Killer for Street/Sport Motorcycles and Scooters with Diameter Exhaust Pipes Slip On (Type 7)

  • ...odels(only fit for right side). Some large-displacement cars such as for Yamaha, for Honda and for Kawasaki need to be used in combination with the exhaust mid-pipe..
  • Stainless Steel Material --- Our motorcycle exhaust Pipe is made of high quality stainless steel, durable, corrosion resistance and rustproof, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
  • Different Colors --- Stainless Steel Exhaust Pipe Tip is a great aftermarket replacement for your old or broken one.Our products have three colors for your option.Different colors can meet the needs of your different occasions and better meet the needs of different groups..
  • Simple Installation --- Exquisite workmanship, shiny bright and cool colors. Protect the original exhaust pipe from sun and rain, avoid rusting and deformation. There is no need to replace any parts, just fix the screw to the appropriate location of tailpipe by wrench.(Note: If the diameter model is not between 38-51MM, simple welding is required).
Check Stock

C4818 2 MIPT PLUG PVC

  • Plug for closing the end of a pipe or fitting.
  • Male National Pipe Taper (NPT) threads for connecting to a female threaded pipe.
  • PVC-DWV for corrosion resistance, high strength, and less weight than fittings made from metal.
  • Smooth interior finish for reduced friction and material buildup.
  • Meets specifications ASTM D2665 and D3311 for quality assurance.
Check Stock

OhLectric OL-43183 Two Hole Rigid Pipe Strap - Sturdy Steel Strap clamps - Zinc Plated Steel - Reinforced Rib - Corrosion Resistant - Easy To Install - 1 Inch (Pack of 25)

  • ...or industrial usage. The Reinforced Hole on this strap gives more strengthening support to the pipings..
  • GREAT RESISTANCE: Iron straps easily get rust when used on the plumbing pipes. To avoid this we have made this strap from zinc-plated steel which is highly resistant to corrosion. Highly corrosion resisting property of this rigid pipe strap makes it an ideal accessory for outdoor applications..
  • EASY TO INSTALL: You can easily fix this two-hole rigid strap over the pipes using the snap-in installation feature. Without the help of complex tools or costly technicians, you can secure your conduit over any surface. This metal strap holds the pipe securely on the wall..
  • WIDE USAGE: These clamps are an excellent choice for securing rigid and IMC Conduit. This metal strap provides great support for your plumbing work. The different sizes of this heavy-duty rigid strap make it easy for you to choose the perfect clamps for your outdoor or indoor plumbing application..
Check Stock