Best Pin Fan Header

Noctua NA-SYC1, 4 Pin Y-Cables for PC Fans (Black)

  • Y-type splitter cables for running two fans on one fan header.
  • Two 4-pin PWM fans can be controlled simultaneously via one PWM fan header.
  • RPM speed signal of one fan is transmitted to the motherboard for monitoring.
  • 4-pin connector supports both 3-pin and 4-pin fans.
  • Black connectors and black cable sleeving for clean optics.
  • Trusted Noctua quality backed up with 6-year manufacturer’s warranty.
Check Stock

Winncon PWM Fan Splitter Cable 1 to 2 Converter, Black Case Fan Splitter Cable, Case Fan Power Duplicator Converter, Dual Case Fan Power Adapter, 10.6 inch (1 Pack)

  • ❤One Divinded into Two: one 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
  • and one 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans.
  • ❤Keep Same Speed: 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control.The fan adapter is compatible with 3-pin and 4-pin PC fans..
  • ❤Increase Airflow: This PWM fan splitter cable connects 2 computer case fans to a single motherboard fan header to increase airflow in your computer case, adding ventilation and regulating the fan speed in a computer case ..
  • ❤High quality: The cooling fan cable is covered with fine plastic for long-term years’ use. High quality high density black sleeved able, 24AWG, and the length is about 10.6 inch (27cm)..
  • ❤This Dual Case Fan Power Adapter is compatible with popular brands of computer case cooling fans, and can be used for a motherboard 4pin interface powering for multiple cooling fans and PWM speed control, lengthen and extend the motherboard 4-pin interface..
Check Stock

Noctua NA-SYC1 chromax.Black 4 Pin Y-Cables for PC Fans Black

  • 3x NA-YC1 chromax.black y-cables for running two fans on one fan header.
  • Two 4-pin PWM fans can be controlled simultaneously on one PWM fan header.
  • 4-pin connector supports both 3-pin and 4-pin fans.
  • Black sleeving: ideal for creating PC builds with neat, focused aesthetics.
Check Stock

upHere 7-Port 4PIN SATA PWM 5V 3PIN ADDRESSABLE RGB Fan Hub/Splitter for 4-Pin & 3-Pin Case Fans in Black-P7PRGB

  • 01.upHere ARGB PWM Fan Hub - Supports up to 7 Fans （3PIN/PWM 4PIN/5V 3PIN ARGB）), Occupying only One 4-pin M/B FAN Header (System Fan or CPU....
  • 02.upHere P7P Fan hub provides individually addressable RGB lighting with software control for unique lighting effects and colors.5V ARGB Header....
  • 03.Capable of connecting to 7 PC fans simultaneously for cooling the computer system. Each port has its own PWM function and the fan speed can be....
  • 04.Powered by system PSU Sata connection to ensure 12V stable power for up to 7 fans..
  • 05.Easy and Quick Installation with a Compact Design, upHere P7P Fan hub allows you to easily attach on the back of the PC case using pre-installed....
Check Stock

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories..
  • FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essent....
Check Stock

CRJ Mini 2-Pin Male Fan to Standard 3-Pin PC Fan Adapter Cable 2-Pack

  • Sold As A 2-Pack, These Adapter Cables Allow You To Connect Mini 2-Pin Fans To A Standard PC Fan Header.
  • Compatible With Both 3-Pin And 4-Pin Fan Headers On PC Motherboards, Fan Controllers, Fan Power Adapter Cables, Etc..
  • Output: 2-Pin Male Mini Fan Connector (2.54mm Pitch, XH-style).
  • Cable Length (Excluding Connectors): 4"/10cm.
Check Stock

CRJ 5-Pin Female PC Fan Adapter Cable for Dell Motherboards

  • Adapter Cable For Connecting Standard 3-Pin And 4-Pin PC Fans To A Proprietary 5-Pin Fan Header.
  • Designed For Compatibility With 5-Pin Fan Headers Found On Dell PC Motherboards.
  • Fully Functional 4-Pin PWM Fan Speed Control Support (3-Pin Analog Fan Speed Control Is Limited To Support By The Motherboard).
  • All Black Appearance And High Quality Construction Featuring High Density Black Sleeving And 22AWG Wiring.
  • Cable Length (Excluding Connectors): 6″/15cm.
Check Stock

Extended Computer Magnetic 5V 3 Pin PC LED Strip - 2 PCS RGB PC LED Strip Light for Aura SYNC / Mystic Sync / Aura RGB / RGB Fusion 5V 3 Pin addressable LED headers ONLY

  • DESIGNED FOR MOTHERBOARD WITH 3PIN ARGB LED STRIP HEADER : Compatible with AURA SYNC (ARGB) / Mystic Light Sync (J-Rainbow) / addressable RGB / RGB....
  • Synchronised control only via 5V 3 pin Addressable RGB header on M/B. : Can be easily controlled by 5V ADD-RGB Header on M/B (3pin), no additional....
  • 5V Addressable RGB LED longing strip: Made with 15 Addressable RGB LEDs to meet the multiple color effect lighting.
  • Also fit for anidees AI-AUREOLA Fan Hub(optional) : AI AUREOLA Fan Hub is designed to connect anidees AR Fan and LED Strips, synchronize the lighting....
  • Magnetic Backing and Adhesive(3M) Strips for universal mounting options.
Check Stock

Gavemi Fan Splitter PWM Adapter Cable All are 4 Pin Compatible with 3 Pin Fan 1 to 4 Converter for PC Computer Case Fan, 12.5 inches 2 Pack

  • Fan splitter cable for running four 4 pin fans on the pwm fan header on a motherboard.
  • PC fan splitter all are 4 pins, Compatible with 4 pin pwm fan connector and 3 pin fan connector.
  • PWM fan splitter has a 4 pin male connector connected to the motherboard, Are four ''4 Pin'' female pins on the other end to connect to the pwm case fan.
  • Notice：This 4 pin fan splitter cable is not missing a pin and all are 4 pins.
  • Length 12.5 inches , Pack of two computer case fan splitter cables.
Check Stock