Best Piezo Transducer

Planet Waves NS Micro Violin Tuner - Violin Clip On Tuner - Digital Violin Tuner - Black

  • VIOLIN TUNER CLIP ON - Features a non-marring, lever-lock clamp that holds the tuner securely to the instrument while allowing easy application and removal..
  • TUNES FROM VIBRATION - Built-in piezo transducer picks up instrument's vibration rather than sound.
  • LCD SCREEN - Tri-color reversible backlit LCD screen makes it easy to tune in dark environments.
  • CALIBRATION - Wide calibration range (410Hz to 480Hz).
  • FOR VIOLINS OR VIOLAS - Tunes both violins and violas.
Check Stock

Guitar Pickup with Volume Control, Piezo Contact Microphone Transducer for Guitar, Mandolin, Banjo, Cello, Kalimba, Harp and Other Stringed Instrument

  • ...ut one minute to mount. There is no need to punch holes on your musical instruments, no batteries required. Just move the pickup to find the best tones when strum, then peel off the pickup backing paper and stick on the surface of the instrument. Connect pickup and amplifier by pickup wire..
  • Widely Use: The stick-on transducer pickup perfect for guitars, mandolin, violin, ukulele, banjo, sitar, harp, hammered dulcimer and any acoustic stringed musical instruments. Sounds crisp, bright and fatter sound, without distortion..
  • Cute Gifts: The portable acoustic pickup is a great birthday gift, party gifts, back to school gifts and Christmas gift for music students, guitar player, musicians, beginner, occasional performer, guitarist..
  • Warmth Tips: When the lightweightt pickup is optimally located on the instrument, you can get the clean and smooth sound quality. (Position reference: near the bridge or sound hole, etc). Please stick the piezo pads on instrument tightly to receive sound perfectly..
Check Stock

Randon Acoustic Guitar Pickup Piezo Contact Pickup for Guitar Ukulele Violin Mandolin Banjo Kalimba Harp

  • Good Sound- The Acoustic Guitar Pickup comes with double sided tape and self adhesive Velcro,it is able to eliminate interfering external sounds and....
  • Stick Patch Design - With the stick patch transducer works by contacting with the sound source directly. it is very easy to install and you can stick....
  • Nice Audio Jack - Randon Piezo Contact Pickup, 9.65” cable length, Jack female socket, suitable for universal cable with 6.35cm jack male plug.The....
  • Wide Application - The guitar pickup fits for many kinds of acoustic instruments, such as Guitar, Ukulele, Violin, Mandolin, Banjo, Kalimba, Harp etc..
  • Promise - 365 days expiration, 7 days unconditional return promise. If you have any questions or demanding advice on musical instruments, please feel....
Check Stock

Self-adhesive Pickups Piezo Transducer, 3 in 1 Microphone Contact & Endpin Jack 1/4' for Electronic Acoustic Guitar Violin Ukulele

  • 3 Transducer Pickup System fit for most string music instruments, amplify an upright bass, banjo, violin, ukulele, viola, cello, mandolin, and a resonator guitar.
  • The plastic squares is a self adhesive block to mount the extra wire in your box, without pre amp they will work well..
  • No Battery and Soldering Required, pre-wired piezo mic save time for you, easy to install, convenient to use.
  • Cable Length: approx. 57cm/ 22.44", 3-pack Piezoelectric Disk Dia.: approx. 27mm/ 1.06", Endpin Jack Dia.: approx. 6mm / 0.24".
  • Material: Plastic, Electronic Part: Metal, Color: black lines, silver tone (Any other problem about product or replacement, please help to contact us, The way to Contact Seller: Find your order -- Contact Seller, then email to us, thanks.).
Check Stock

Randon 2pcs Acoustic Guitar Pickup Piezo Contact Pickup for Guitar Ukulele Violin, Mandolin, Banjo, Kalimba, Harp

  • Good Sound- The Acoustic Guitar Pickup comes with double sided tape and self adhesive Velcro,it is able to eliminate interfering external sounds and not be influenced by sound reflections from nearby objects, bring you the clear sound quality..
  • Stick Patch Design – With the stick patch transducer works by contacting with the sound source directly. it is very easy to install and you can stick it onto the instrument to minimize the damage to instrument body..
  • Nice Audio Jack – Randon Piezo Contact Pickup, 9.65” cable length, Jack female socket, suitable for universal cable with 6.35cm jack male plug.The audio jack can replace the end pin and install the strap..
  • Wide Application – The guitar pickup fits for many kinds of acoustic instruments, such as Guitar, Ukulele, Violin, Mandolin, Banjo, Kalimba, Harp etc..
  • Promise – 365 days expiration, 7 days unconditional return promise. If you have any questions or demanding advice on musical instruments, please feel free to contact us..
Check Stock

DAOKI 5PACK piezoelectric Ceramic Vibration Sensor piezo 3.3V/5V Module Analog Controller Electronic Components Supplies Sensor for Arduino with Dupont Cable

  • When the piezoelectric ceramic shocking will generate an electrical signal, controller analog port can be perceived slight vibration signals, also can be realized with vibration interactions related works, such as electronic drums..
  • Working Voltage: 3.3V or 5V. Working Current: 1mA..
  • Please connect analog voltage ceramic vibration sensor to the UNO controller's analog port A0 in accordance with the procedure, then observe the output value of serial port when the vibration degree is different, it can realize interactive works related to the vibration..
  • This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration..
Check Stock

D'Addario Guitar Tuner - Micro Headstock Tuner - Tuner for Acoustic Guitar, Electric Guitar, Bass Guitar, Mandolin, Banjo, Ukelele - Compact & Discrete - Clip On - 1 Pack

  • ... lightweight, discrete, compact tuner hides behind the headstock practically blending into the instrument and is small enough to be kept on your instrument while stored in its case. At 1.25", you will want one for each stringed instrument you own..
  • EXTREME ACCURACY - The NS Micro features an extremely accurate piezo transducer that picks up an instrument's vibration rather than sound. A wide calibration range (410-480Hz) guarantees precise performance and a visual metronome mode (20-270bpm) adds an additional practice tool..
  • EASY TO READ - The easy-to-read, tri-color backlit screen displays the note in red when out of tune, yellow when close, and green when in tune. Powered by a readily available (and included) CR2032 battery, you will enjoy maximum battery life thanks to the tuner's auto-off function..
  • VERSATILE - Featuring a 360-degree swivel mechanism and adjustable padded clamp, the NS Mini offers optimal viewing angles and maximum positioning flexibility. For left or right-handed instruments with small or large headstocks, it is the ideal choice for acoustic and electric guitars, basses, mandolins, banjos and ukuleles..
  • D'ADDARIO ACCESSORIES - For over 20 years, D'Addario Accessories (formerly Planet Waves) has been leading the industry in innovativ....
Check Stock

MakerHawk 4pcs Analog Ceramic Piezo Vibration Sensor Module 3.3V/5V for Arduino DIY Kit

  • This Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is proportional with the strength of vibration. So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration..
  • When the piezoelectric ceramic shocking will generate an electrical signal, controller analog port can be perceived slight vibration signals, also can be realized with vibration interactions related works, such as electronic drums..
  • Working Voltage: 3.3V or 5V. Working Current: 1mA. Interface Type: Analog Output..
  • Please connect analog voltage ceramic vibration sensor to the UNO controller's analog port A0 in accordance with the procedure, then observe the output value of serial port when the vibration degree is different, it can realize interactive works related to the vibration..
  • Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to y....
Check Stock

LUCKY Fish Finder Transducer Mount Arm Kayak Bracket Transducer Mounting Arm Flexible for Boat Canoe Kayak Fishing

  • ◆ Designed for Kayak & SUP Fishing : The transducer mount arm is an easy way to mount fish finder transducers as well as other kayak accessories. It is the best way to protect your transducer from scratching or cracking when your boat is going through bottom complex terrain of waters. The transducer mount arm helps to adjust the sank depth of wired transducer compared to mounting the transducer to the boat hull..
  • ◆ 360° Flexible Arm : The extended length of the transducer mounting arm is 21inch. Since the arm is bendable, you could adjust the angle of the transducer mounting arm to your most favorable position. Although it is a flexible arm, it couldn’t be either easily bended by the slight force. It is a solid and hard metal stick covered by the rubber..
  • ◆ Easy Install & Remove : The design of transducer mount base cup is adaptable for various kayaks and small boats. You could fix it by its unique suction cup on any smooth surface. So you can switch the transducer mount arm to different kayaks as you like. Meanwhile, you could also fix the transducer mount arm by three screws if there are screw holes in your kayak. You could also use double sided s....
Check Stock