Best Picatinny Rail Scope Mount

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

✌ Precision Material - Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy & durable..
✌ Convert 11mm Dovetail to 21mm Picatinny Rail - 2.94 inches length at the base, the picatinny rail extends 3.94 inches allowing for more flexible optics placement..
✌ Mount Base - Fit 11mm dovetail mounts, Base mount 3/8" to 7/8" converter adapter. Low profile 0.59" riser rail for scope..
✌ Top With 9 Slots Weaver Style Rail - Top 21mm picatinny rail allows for the mounting of picatinny or weaver standard scopes, red dots or other accessories..
✌ Easy To Install - Rail adaptor installs easily via dovetail mount and one vertical stop pin, attached allen wrench can help you to tight stable and no shaking!.

Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..

Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
All Monstrum scope mounts and accessories come with a lifetime guarantee.

✌ Convert 11mm Dovetail to 21mm Picatinny Rail - 4.31 Inches length at the base, LONSEL picatinny rail extends 6.1 inches / 155mm allowing for more....
✌ Mount Base with Middle V-cut - Fit 11mm dovetail mounts, Base mount 3/8" to 7/8" converter adapter. Low profile 0.54" riser rail for scope mount.....
✌ Top With 14 Slots Picatinny Style Rail - Top 21mm picatinny rail allows for the mounting of standard picatinny scopes, red dots or other....
✌ Precision Material - Premium out of aircraft grade aluminum alloy and black hard coat anodize finish, sturdy & durable. Complete with one vertical....
✌ Easy To Install - Rail adaptor installs easily via dovetail mount and one vertical stop pin, attached allen wrench can help you to tight stable....

Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
All Monstrum scope mounts and accessories come with a lifetime guarantee.

Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings.
Heavy duty - Scope Mount Weight about 8.38oz.
Mount provides 2" of forward scope positioning on the .223 flat top platform.
Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for....

1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
34 mm diameter rings for mounting standard 34 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.