Best Petrol Bike

HURRICANE Fork-Up Mount Adapter Envy Road 12x100mm T-A Fork - HU4769

  • 2-stroke 50cc or 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach....
  • Fits most 26" or 28' wheeled bikes with standard V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the....
  • Key parameters: Rated Power:1.15Kw~2.5kw/5000r/min.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 32: 1 after....
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to....
Check Stock

Amarine Made 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump with Tubes Truck Rv Boat ATV (60W)

  • 【Specificaiton】: Input Voltage: DC 12V.
  • Motor Oil (40-60 degrees) Flow Rate: approx. 0.8-1.0L / min.
  • 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly..
  • 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc).
Check Stock

Bicycle chain tensioners - Mini Bike Chain Tensioner 10mm Chain Roller Slider Tensioner Wheel Guide Pit Dirt Mini Bike Moto Atv Blue

  • 10mm Drive Chain Roller --- This pulley tensioner chain roller can also be used on gas petrol motorized bicycle conversions kits. Vary colors for you....
  • Size --- Inner Diameter: Approx. 10mm / 0.39". Outside Diameter: 3.5cm / 1.38". Total Length: 3.3cm / 1.3" for mini bike wheels.
  • the chain then runs over it to keep it aligned for tires for 80cc motorized bike.
  • With Heavy Duty Bearings --- Dirtbike nylon chain roller wheel complete with heavy duty bearings ready to use for 33mm chain tensioner roller.
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock

FEWENi 80cc 2 Stroke Bicycle Engine Motor Gas Motorized Bike Motor Kit

  • Ambienceo 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,which enable you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
  • The bicycle engine kit fits most 26" or 28" wheeled bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 5 horsepower/6000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting..
Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

TRIBLE SIX 50CC 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit Set (Black)

  • 2-stroke 50cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 30km/h as fast as a motorcycle or scooter.
  • Fits for most 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke 40mm x 38mm=48cm3, Max. power 1.6Kw/6000r/min (3 horsepower/6000r/min), Super fuel-efficient, only consuming 1.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock

MOTOOS 80CC 24' 26' 28' Bicycle Engine Kit Bike Bicycle Motorized 2 Stroke Cycle Motor Engine Kit (Silver)

  • MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting.
Check Stock

MOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Black)

  • MOTOOS 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike,you can enjoying riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter.
  • Fits for most 24" 26" or 28' wheeled bikes with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km.
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km.
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully.
Check Stock

STP Gas Treatment (3 pack)

  • STP Car Petrol Treatment 200ml (CLO51200EN) New..
  • STP Petrol Treatment used regularly helps save fuel by keeping fuel intake systems clean of harmful deposits.
  • fight rust and corrosion in the fuel system.
  • reduce exhaust emissions. Use every 1000 miles / 1600 kms. Safe to use with other STP additives..
  • Suitable for all classic and modern engines, catalytic converters..
Check Stock