Best Performance Power Rotary Tools

TEMO 100 pc 1/2 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

100 PC 1/2" (12.7mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
100 piece 1/2" (12.7mm) 60 Grit, 1/2" (12.7mm) Diameter.
2 piece 1/2" (12.7mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

Check Stock

TEMO 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

100 PC 1/4" (6.35mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
100 piece 1/4" (6.35mm) 60 Grit, 1/4" (6.35mm) Diameter.
2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

Check Stock

Chicago Electric Power Tools Flexible Shaft Grinder and Carver

【276PCS Rotary Tool Accessories Kit】Includes Versatile rotary tool accessories, which can be used great for all types of detail work, such as cutting, grinding, sanding, sharpening, polishing, engraving, drilling and cleaning..
【Universal Applications】Equipped with Avid Power 3 different collets (1/16”, 3/32” and 1/8”)1.6mm, 2.3mm and 3.2mm, which was designed to match different accessories, compatible with most of rotary tools..
【Compact Organizer】All parts organized neatly in the storage box, which can avoid loss, rust and damage of the accessories. Plastic box is not only more solid and moisture-proof but also easy for carrying and hanging..
【Wide Usage】1/8"diameter shanks, compatible with most rotary tools.
Perfect for the micro electronic devices and other industries (fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless steel).
【What You Would Get】276PCS rotary tool accessories, accessory case, user manual..

Check Stock

Cordless Rotary Tool, 12.0V

Powerful Motor - Unmatched performance under load.
1/8-inch Collet - Compatible with all current rotary tool accessories.

Check Stock

Rotary Tool Accessories Cutting Wheels Set 42 Pcs Diamond Cutting Wheels 15pcs and Resin Cutting Off Wheels 15pcs with Mandrels, Hss Circular Saw Blades 6pcs with 1/8\ Shank for Wood Metal DIY Craft

Save Money And Time----- The cutting wheels set cuts down on the cost of operating on rotary tool and is ideal for cutting, grooving and trimming wood, plastic, ceramics, metal and DIY production. These cut off wheels are compatible with most rotary tools, electric drills, hanging grinders, electric grinders as good as original. We use rotary tools to test this accessory kit. And the mandrels fit for most power die grinders or rotary tools & air tools..
Efficient And Smooth Cuts----- These rotary cutting wheels tool are made of high quality steels, diamond particles and fiberglass reinforced for strength and durability. The rotary cutting wheels tool kit includes 15 diamond cutting wheels match with 2pcs 1/8'' shank mandrels, 6 HSS cutting saw blade discs match with 1pcs 1/4'' shank and 1pcs 1/8'' shank, 15 resin cutoff wheels match with 2pcs 1/8'' mandrels..
Versatile Use----- The high speed steel saw blade and mandrel set is ideal for fine precision cuts in aluminium, brass, copper, wood and plastic. The diamond cutting wheels are suitable for cutting gems, glass and ceramics. The reinforced cutoff wheel set is great for cutting and grooving all kinds of metal and fine wood, plastics and ceramics..
Easy to Install----- These cutting wheel set for rot....

Check Stock

Dremel 8220-1/28 12-Volt Max Cordless Rotary Tool With All-Purpose Rotary Accessory Kit 160-Piece

DREMEL 8220 SERIES: Offering the highest performance and versatility of all Dremel cordless rotary tools, the Dremel 8220 Variable-Speed Cordless....
DESIGN: A slim and ergonomic body with a 360-degree grip provides comfort and control in any position..
SPEED: The variable speed control can be adjusted from 5,000 to 35,000 RPM for maximum precision with a separate on/off switch and speed control....
RECHARGABLE: The rechargeable 12VMAX Lithium-ion battery provides power to the tool and the EZ Twist nose cap with wrench provides quick and easy....
BUNDLE INCLUDES: Dremel 8220 Series 12VMax Cordless Rotary Tool (carrying case, 1-hour charger, and one 12V max lithium-ion battery) and Dremel 710-08....

Check Stock

Rotary Tool Kit, Towallmark 1.5Amp Variable Speed Power Rotary Tool with Flex Shaft, 88pcs Accessories & 4 Attachments, Perfect for Crafting and DIY Projects -Cutting, Wood Carving, Engraving, Sanding

...ool, 4 attachments, 88 high-quality accessories, and plastic storage case. This power rotary tool accepts most tool accessories by changing different collets provided in our Rotary Tool Kit. It is able to compatible with most brand rotary tool accessories like Dremel, GOXAWEE, Apex Forge on the market..
【Excellent Performance】: Together with the high-performance 160W 1.3AMP motor, the power rotary tool can provide strong rotational power with lower noise making. 6 levels speed shift ranging from 8,000 rpm to 35,000 rpm makes your DIY project easily conduct..
【Comfortable Operation】: The ergonomic & slim body design allows long-time working be more relaxing and cozy. Besides, the innovated airflow system design helps prevent heat build-up for smoother, cooler, and quieter operation..
【Multipurpose Accessories】: 88pcs Accessories & 4 Attachments can meet your different needs and application ranging from cutting, wood carving, engraving, drilling, sanding, polishing, deburring, shaping and even grinding pets’ nails. And there are more applications and project waiting for you to discover..
【Amazing Gift for DIYer】: Machine and accessories are well organized in a solid carrying case with 3-year quality guarantee. The rotary tool kit is light....

Check Stock

146pcs Rotary Tool Accessories Kit, Power Tool Accessory Set with Drill Bit Set for Cutting, Carving, Polishing, Sanding Grinding

Full-featured Package: This rotary tool accessories kit contains complete cutting, grinding, sanding, sharpening, polishing, engraving, drilling, cleaning and other rotating tool accessories, which can be applied to various materials such as wood, plastic, metal, etc. It is very practical.
Good Compatibility: The rotary tool set is very compatible. The 3 mm (1/8 inch) tool holder is compatible with many rotary tools, for die grinders, flexible shafts, and any other tool that accepts most rotary tools with 1/8 inch diameter shank bits. Can be stored as a daily tool kit.
Wear-resistant and Durable: All accessories are made of high-quality materials, very wear-resistant and durable, not only can achieve the effects of grinding, cutting, polishing, engraving, drilling, etc., but also can be used for a long time.
Storage Box Packaging: All tools are packed in boxes and will not be lost in confusion. You can find the tools that you want at a glance.
Wide Application: The power tool accessory set is very functional, not only suitable for most metals, castings, welded joints, but also for fine processing of jade, ceramics, glass, wood, hardened steel, cast iron, stainless steel, etc..

Check Stock

Cricut Maker Machine Bundle 4 Smooth HeatTransfer Vinyl Design/Projects Guide

The Cricut Maker is the ultimate smart cutting machine. It’s professional-level cutting performance is now accessible to everyone. It cuts hundreds of materials, from the most delicate fabric and paper to matboard and leather. The rotary blade, with its gliding, rolling action, cuts through virtually any fabric. The Maker can apply up to 4kg of force and includes an expandable suite of tools. The sewing pattern library features hundreds of patterns as well as your own designs..
With its revolutionary toolset, Cricut Maker cuts, writes, and scores more materials with greater precision and control than ever before. Plus, with more tools coming, Cricut Maker grows with you as you master each new craft. The Rotary Blade brings customizable, precision fabric cutting to the home for the very first time. Use it to cut cotton, fleece, denim, and more. With its gliding, rolling action, it cuts virtually any fabric quickly and accurately without backing material..
Bundle includes a Brand New Cricut Maker machine.

Check Stock