Best Performance Coating

ARCTIC Freezer 33 eSports ONE - Tower CPU Cooler with 120 mm PWM Processor Fan for Intel and AMD Sockets - for CPUs up to 200 Watts TDP - Silent and Efficient (Yellow)

  • HIGH PERFORMANCE CPU COOLER: The Freezer 33 eSports ONE is a powerful Tower CPU cooler equipped with our new BioniX Fan. Thanks to a newly developed thermal coating and our new BioniX F120 fan the cooler gives you top notch performance for CPUs with a TDP up to 200 W..
  • THERMAL COATING: A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance..
  • COMPATIBLE WITH INTEL SOCKETS: 1150, 1151, 1155, 1156, 2011*, 2011-3*, 2066* (*Square ILM) and AMD Sockets AM4.
  • WIDE RANGE OF REGULATION: With the range of 200 to 1800 RPM the fan of the Freezer 33 eSports ONE and other fans are controllable in one setting thanks for ARCTIC’s PST (PWM Sharing Technology) to keep the overall noise level minimal yet the cooling performance as needed..
  • MAXIMUM PERFORMANCE FOR HIGHEST-END CPUs: The contact surface of the Freezer 33 eSports ONE heatpipes does not cover the full protection cap, but, more importantly, are right where the processor DIE is and cover even the largest versions (18 core) completely. This leads to maximum performance..
Check Stock

ARCTIC Freezer 33 Esports ONE - Tower CPU Cooler with 120 mm PWM Processor Fan for Intel and AMD Sockets - for CPUs up to 200 Watts TDP - Silent and Efficient (Red)

  • HIGH PERFORMANCE CPU COOLER: The Freezer 33 eSports ONE is a powerful Tower CPU cooler equipped with our new BioniX Fan. Thanks to a newly developed thermal coating and our new BioniX F120 fan the cooler gives you top notch performance for CPUs with a TDP up to 200 W..
  • THERMAL COATING: A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance..
  • COMPATIBLE WITH INTEL SOCKETS: 1150, 1151, 1155, 1156, 2011*, 2011-3*, 2066* (*Square ILM) and AMD Sockets AM4.
  • WIDE RANGE OF REGULATION: With the range of 200 to 1800 RPM the fan of the Freezer 33 eSports ONE and other fans are controllable in one setting thanks for ARCTIC’s PST (PWM Sharing Technology) to keep the overall noise level minimal yet the cooling performance as needed..
  • MAXIMUM PERFORMANCE FOR HIGHEST-END CPUs: The contact surface of the Freezer 33 eSports ONE heatpipes does not cover the full protection cap, but, more importantly, are right where the processor DIE is and cover even the largest versions (18 core) completely. This leads to maximum performance..
Check Stock

Arctic Freezer 33 eSports ONE - Tower CPU Cooler with 120 mm PWM Processor Fan for Intel and AMD Sockets - for CPUs up to 200 Watts TDP - Silent and Efficient (Green)

  • HIGH PERFORMANCE CPU COOLER: The Freezer 33 eSports ONE is a powerful Tower CPU cooler equipped with our new BioniX Fan. Thanks to a newly developed thermal coating and our new BioniX F120 fan the cooler gives you top notch performance for CPUs with a TDP up to 200 W..
  • THERMAL COATING: A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance..
  • COMPATIBLE WITH INTEL SOCKETS: 1150, 1151, 1155, 1156, 2011*, 2011-3*, 2066* (*Square ILM) and AMD Sockets AM4.
  • WIDE RANGE OF REGULATION: With the range of 200 to 1800 RPM the fan of the Freezer 33 eSports ONE and other fans are controllable in one setting thanks for ARCTIC’s PST (PWM Sharing Technology) to keep the overall noise level minimal yet the cooling performance as needed..
  • MAXIMUM PERFORMANCE FOR HIGHEST-END CPUs: The contact surface of the Freezer 33 eSports ONE heatpipes does not cover the full protection cap, but, more importantly, are right where the processor DIE is and cover even the largest versions (18 core) completely. This leads to maximum performance..
Check Stock

3M Safety Glasses Solus 1000 Series ANSI Z87 Scotchgard Anti-Fog Clear Lens Low Profile Blue/Black Frame

  • 3M Scotchgard Anti-Fog Coating lasts longer than traditional anti-fog coatings, helping to increase eyewear performance in wet and steamy environments.
  • Workers may enjoy reliable, clearer sight longer, because the coating with its active ingredient is bonded to the lens. The coating retains its effectiveness for at least 25 washings with water, allowing workers to wear their eyewear longer.
  • The coating withstands disinfection with diluted bleach soaking or alcohol wipes without losing its anti-fog performance.
  • 3M ScotchgardAnti-Fog Coated Eyewear meets the requirements of ANSI Z87.1-2015 and CSA Z94.3.
  • Based on 3M internal testing per EN168 test method when compared to traditional anti-fog coatings.
Check Stock

Liquid Rubber Smooth Polyurethane Deck Coating - Solar Protection Deck Sealant, Non-Toxic Multi-Surface Waterproofing Membrane, Easy to Apply, White, 5 Gallon

  • INNOVATIVE PROTECTIVE DECK COATINGS - Liquid Rubber Polyurethane Deck Coating is a high-performance polyurethane coating with a hard, durable & waterproof surface with excellent UV stability.
  • POLYURETHANE COATING FOR - Deck protection, on concrete or wood walkways, non-corroded metal structures, pool decks, indoor/outdoor floors, fences, baseboards, plywood surfaces, and more.
  • EASY TO APPLY - Apply using a conventional brush, roller, or single component sprayer.
  • COVERAGE - 40 square feet per gallon, final coverage after 3-4 generous coats. 30 square feet per gallon for high traffic areas (4-5 generous coats).
  • APPLICATION - Avoid hot, intense direct sunlight during application. Apply above 10 degrees Celsius (50 degrees Fahrenheit). Do not apply later in the day if dew is forecast.
Check Stock

Liquid Rubber Smooth Polyurethane Deck Coating - Solar Protection Deck Sealant, Non-Toxic Multi-Surface Waterproofing Membrane, Easy to Apply, Misty Gray, 1 Gallon

  • INNOVATIVE PROTECTIVE DECK COATINGS - Liquid Rubber Polyurethane Deck Coating is a high-performance polyurethane coating with a hard, durable & waterproof surface with excellent UV stability.
  • POLYURETHANE COATING FOR - Deck protection, on concrete or wood walkways, non-corroded metal structures, pool decks, indoor/outdoor floors, fences, baseboards, plywood surfaces, and more.
  • EASY TO APPLY - Apply using a conventional brush, roller, or single component sprayer.
  • COVERAGE - 40 square feet per gallon, final coverage after 3-4 generous coats. 30 square feet per gallon for high traffic areas (4-5 generous coats).
  • APPLICATION - Avoid hot, intense direct sunlight during application. Apply above 10 degrees Celsius (50 degrees Fahrenheit). Do not apply later in the day if dew is forecast.
Check Stock

Liquid Rubber Textured Polyurethane Deck Coating - Solar Protection Deck Sealant, Non-Toxic Multi-Surface Waterproofing Membrane, Easy to Apply, Stone Gray, 5 Gallon

  • INNOVATIVE PROTECTIVE DECK COATINGS - Liquid Rubber Polyurethane Deck Coating is a high-performance polyurethane coating with a hard, durable & waterproof surface with excellent UV stability.
  • POLYURETHANE COATING FOR - Deck protection, on concrete or wood walkways, non-corroded metal structures, pool decks, indoor/outdoor floors, fences, baseboards, plywood surfaces, and more.
  • EASY TO APPLY - Apply using a conventional brush, roller, or single component sprayer.
  • COVERAGE - 40 square feet per gallon, final coverage after 3-4 generous coats. 30 square feet per gallon for high traffic areas (4-5 generous coats).
  • APPLICATION - Avoid hot, intense direct sunlight during application. Apply above 10 degrees Celsius (50 degrees Fahrenheit). Do not apply later in the day if dew is forecast.
Check Stock

Megatron 4\ Diamond Cup Grinding Removing Disc Wheel for Concrete, Paint, Epoxy, Glue and Mastic with CDB Newest Technology (Megatron 4\)

  • CDB Technology - Cluster Diamond Brazing Technology, a new concept and invented technology of diamond segment production. The purpose of CDB product is to make high level grinding & coating removal, through molecular sintering method..
  • HIGH LEVEL GRINDING & COATING REMOVAL - Optimized design for high performance on grinding & coating removal. Works for concrete, asphalt, epoxy coating, tile glue, urethane and paint. Feel the finest surface grinding and removing..
  • FAST & LONG-LIFE - Longer working life with fast removing speed enables easy work and less working fatigue..
  • SPECIAL SHAPE & ANGLE DIAMOND BEADS - Excellent grinding & removing process by special shaped & angle diamond beads.
  • CLUSTER DIAMOND BRAZING TECHNOLOGY - Molded sintering and Single layer brazing creates solid shape brazed diamond tools. Molded diamond segments shows excellent performance with long-lasting life..
Check Stock

3M Solus 1000-Series Safety Glasses S1201SGAF-KT, Kit, Foam, Strap, Green/Black, Clear Scotchgard Anti-Fog Lens, 20 EA/Case

  • Scotchgard Anti-Fog Coating lasts longer than traditional anti-fog coatings, helping to increase eyewear performance in wet and steamy environments.
  • Workers may enjoy reliable, clearer sight longer, because the coating, with its active ingredient, is bonded to the lens.
  • The proprietary coating retains its effectiveness for at least 25 washings, allowing workers to wear their eyewear longer.
  • The coating withstands disinfection with diluted bleach soaking or alcohol wipes without losing its anti-fog performance.
  • Workers can feel confident wearing Scotchgard Anti-Fog coated eyewear because it meets the requirements of ANSI Z87.1-2015 and CSA Z94.3.
  • Kit includes optional elastic strap and removable foam gasket.
Check Stock