Best Pei Sheet Prusa Mk3s

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

HONG YI-HAT GT2 Idler Pulley Without Tooth Timing Belt Pulley Wheel 3/5MM Bore Width 6MM 3D Printer Parts for prusa I3 MK3 MK3S Drone Spare Parts Size Bore 5mm

  • Bore 3mm: For Prusa I3/MK2.5/SMK3/MK3S, etc.
  • Bore 5mm: For Wanhao I3 and other FDM printers.
Check Stock

2-Pack 3pin Dual Ball Bearing DC Fans DC 5V 4010 Extruder Hotend Cooler Radiator Left Hotend Fan for Prusa i3 MK3 MK3S MK2/2.5 3D Printer

  • Dual Ball bearing fan, Long lifetime 50000Hours tested under 40degree temperature.
  • It has two sides, but the side with sticker must be always facing the hotend (not visible when the fan is mounted). Otherwise, the cooling won't work....
  • 5V DC 0.1A, This fan is used for Prusa i3 MK3 MK3S MK2/2.5 3D printer Extruder.
  • Power connector:3pin with RPM measuring function.
Check Stock

HICTOP Ender 3 v2 Upgrades Flexible Build Plate PEI Steel Sheet 235x235mm Works for Ender 3/Ender 3 Pro/Ender 5 3D Printers

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lasting，The service life of our pei is 10 times longer than other Glass Bed.
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.It can be cleaned easily with water or alcohol.
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time.
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, without using any glue or other tools to help the model to stick onto the sheet.
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

  • ✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top..
  • ✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
  • ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
  • ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily wh....
Check Stock

Official Creality PEI Sheet 235x235mm Flexible Removable Spring Steel Plate Magnetic Sticker Heated Bed Kit Replacement Accessory for Ender 3 S1/Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Hot Bed Surface

  • 【Quality assurance】100% Official Creality 3D printer PEI Sheet 310*320mm removable magnetic flexible Texture heated bed platform. Gold PEI surface is of strong high-temperature stability, flame retardant, heat resistance, high strength, wear resistance, and good printing stability..
  • 【Wide Application】Compatible with PLA/ PETG/ PEEK/ ABS and any other filaments. 310*320mm spring steel sheet 3d printer bed works well with CR-10S PRO/ CR-10 V2/ CR-10 V3/ CR-X/ CR-X Pro/ CR-10S PRO V2/ Ender-3 Max/ Ender-3 Max Neo and other same-sized beds..
  • 【Great Adhesion & Easy Take Mold】Print molds onto PEI build plate frosted texture surface directly. No tape, no more glue, release your printing anxiety. With a magnetic printing PEI sheet plate, you only need to remove it from the bed and bend it, then the mold can be removed. When you let go, they just return back to shape and will not break easily. No need to scratch, pry and damage your prints!.
  • 【Simple Installation】Our PEI steel sheet is easy to install and the installation time is less than 2 minutes. Just need to place the bottom 3M adhesive surface on top of the ....
Check Stock

2-Pack Long Lifetime 3wires 50x50x15mm DC Fans DC 5V Cool Blower Fan 5015 Extruder Hotend Cooler Front Hotend Fan for Prusa i3 MK3 MK3S MK2/2.5 3D Printer

  • Dual Ball bearing fan, Long lifetime 50000Hours tested under 40degree temperature.
  • It has two sides, but the side with sticker must be always facing the hotend (not visible when the fan is mounted). Otherwise, the cooling won't work....
  • 5V DC 0.1A, This fan is used for Prusa i3 MK3 MK3S MK2/2.5 3D printer Extruder.
  • Power connector:3pin with RPM measuring function.
  • Package:2piece 5015 Front hotend blower fan.
Check Stock

HICTOP Upgrades Flexible Build Plate PEI Steel Sheet Textured Bed Works for CR-10 CR-10S CR-10S pro CR-10 V2 V3 and Other Same Sized 3D Printers 310 * 310

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for....
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.....
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives.....
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges....
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock

FYSETC 3D Printer Prus I3 MK3 MK52 Printing Platform Double-Sided Textured Powder Black 254x241mm / 10x9.4 inch Hotbed Cover Spring Steel Sheet for Prus i3 MK3 MK2.5

  • Newly upgraded PEI coated steel plate，Textured build plate..
  • size：254x241mm/10x9.4 inch,For Prus i3 MK3 MK2.5.
  • It's spring steel sheet and PEI 2 in 1 item, made of high strength spring steel sheet with pei powder coat. No more PEI sheet replacement, no more 3M....
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, PETG, TPU,PUA, etc.
  • After-sales Guarantee: each one defective item can have the free replace or refund, If need further please fell free to email us, we and our engineers....
Check Stock