Best Pe Connector

60 Pieces Push Air Fittings Include 1/4 Inch OD Push to Connect Fittings Pneumatic Fittings Kit with 1 Black 1/4 Inch OD Nylon Air Tubing, 15 Spliters 15 Elbows 15 Tee 15 Straight

  • Package includes: you will receive 15 straight PU 1/4 inch pneumatic connectors and 15 elbow PV 1/4 inch pneumatic connectors and 15 PY 1/4 inch pneumatic connectors and 15 T-type PE 1/4 inch pneumatic connectors (black blue) and 1 roll of 1/4 inch OD black pneumatic nylon tube 33 ft (approx. 10 m), a nice combination for easy use and replacement of your daily life.
  • Size details: the tube outer diameter is about 1/4 inch, 4 types of pneumatic connections and a roll of 10 m (33 ft) 1/4 inch OD black pneumatic nylon tubing, the right size for your pneumatic piping needs.
  • Practical design: the air line fittings release ring of the 1/4 inch pneumatic air line fits the ellipse design to ensure that the disconnect device is in a nice shape, which can provide sealing performance, maximum pressure is 0~145 Psi, operating temperature is 32~140 degree Celsius.
  • Easy to install: the 1/4 inch pneumatic connector is easy to install and remove on 1/4 OD pipe, even easy to change the direction of the pipe connector after installation, suitable for PU/ PA/ PE/ PVC pipe.
  • Reliable material: these pneumatic connectors are made of quality plastic and stainless steel, corrosion resistance and ductility, which can serve you for a long time, and bring you a nice use experience.
Check Stock

Hourleey Sewer Jetter Kit for Pressure Washer 1/4 Inch NPT 100 Ft Drain Cleaning Hose Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle 4000 PSI

  • Package include: 100 ft drain cleaning hose with 1/4" NPT male connector on the end, Orifice 4.0 button nose, M22 quick connector to 1/4" female....
  • Durable jetter hose: Small-diameter, flexible sewer hose with a connector that allows hoses and nozzles to pass through sewer lines. PE pipe, PVC....
  • Button nose sewer nozzle: 1 front jet located at 0 degree, which can flush the blockage. 3 rear jet at 33 degree, flush away debris loosened by the....
  • Rotating sewer nozzles: 3 rear jets at 33 degree, The nozzle is easy to slide into the drain and sewer lines to clean and flush debris. Orifice: 4.5..
  • Widely application: Suitable for many electric / gas-powered pressure washers up to 4,000 PSI. Hourleey sewer jetter hose can be connected to pressure....
Check Stock

120W Slim Power Cord AC Adapter Charger for MSI Gaming Notebook A12-120P1A A15-120P1A ADP-120MH D MSI GP60 GE60 GE62 GE70 GT640 Len Y730P B470 B475 by ETTECH

  • Specifications: AC Input: AC 100V - 240V 50-60Hz.
  • Connector:5.5 x 2.5mm(Please Check Connector Size to Ensure....
  • Compatible models: Msi GL62M GV62 GE60 GE60 GE62 GE70 GE72 GL62 GP60 GP62 GP70 GP72 GS70 PE60 PE70 PX60 MS-16GA MS-16GD MS-16GC MS-16GF MS-1771....
  • Compatible models: LEN Y460 Y570 Y580 Y400 Y730P Y480 Y560 Y430P Y470 Y460P Y500 Y510P 41A9734 41A9732 41A9733 57Y6556 57Y6547 36001718 36001684....
  • Safety Guarantee: Our products are in compliance with top industry standards, Built with Industry grade materials and premium circuitry, fully protect....
  • WHAT YOU GET: 1 x Power Cord AC Adapter Charger, 1 x High-Quality AC cable(About 6FT/1.8m). One-on-One 24 hours customer service,30 days money back or....
Check Stock

Xiny Tool Sewer Jetter Kit for Pressure Washer, 50 FT 1/4 Inch NPT Drain Cleaning Hose, Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle, 4000 PSI

  • Widely application -- Suitable for many pressure washers up to 4,000 PSI. This sewer jetter hose can be connected to pressure washer pump with American standard M22 and 1/4" connector. It can also be connected to pressure washer wand via the 1/4" quick connector..
  • Package include -- 50 ft drain cleaning hose with 1/4" NPT male thread on the end, 4.0 orifice button nose, Rotating nozzle, M22-14mm quick connector to 1/4" female thread, 1/4" quick connector to 1/4" female thread and PTFE tape.
  • Durable sewer hose -- flexible sewer hose with small diameter that allows hoses and nozzles to pass through sewer lines. PE pipe, PVC coating, Dual-layer terylene reinforcement, can resist weather, oil, ozone and abrasion..
  • Orifice: 4.5 rotating nozzle -- With 3 rear jets at 33 degree, the nozzle is easy to slide into the drain and sewer lines to clean and flush debris..
  • Orifice 4.0 button nose -- 1 front jet located at 0 degree, which can flush the blockage, the 3 rear jet at 33 degree, flush away debris loosened by the front jet..
Check Stock

Feelers 1/2" Garden Soaker Hose 15 Ft with Soaker Hose Fittings, Round Rubber Garden Drip Hose 70% Saving Hose for Garden Beds,Lawn and Plants

  • ...aterial, which optimizes the pressure resistance of the hose and makes it difficult for the hose to burst. Its operating pressures range from 30psi to 60psi, with an inside diameter of 1/2"(12mm) and an outside diameter of 5/8"(16mm). Water can slowly seep out of the hose to provide the plants with proper moisture..
  • Connector: The soaker hose comes with a 3/4" NPT threaded connector. The gasket inside the connector adds many small holes to reduce the water pressure and prevent the connector from leaking water. In addition, the clamp we are equipped with can be used to replace the brass ring and prolong the service life of the hose..
  • Water saving: The hose is arranged along the direction of the plant, and the water slowly exudes from the pipe wall, extending the time that the water stays at the root of the plant. This reduces over irrigation and saves up to 70% of water..
  • Versatile usage: The soaker hose connector can be connected to other hoses, and it can be above ground or buried underground. Suitable for lawn, garden, flower bed and other places, especially for fine irrigation of rows of plants..
  • Package included: 1/2" x 15ft(4.5m) soaker hose, clamps x2, 3/4" male x1, 3/4" female x1,coupling x2, elbow x2, Tee x2, gasket x2, plug x2..
Check Stock

Bulkhead Union Push to Connect Tube Fitting 3/8 In Tube OD Stainless Steel Double Threaded 5 Packs

  • Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
  • Bulkhead Fitting Type: Push In Straight Male Connector.
  • Body:Nickel Plated Brass Seal, O-Ring NBR.
  • Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
  • Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
  • Fluid Admitted: Air, Vacuum, Water (No Freezing).
  • Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.
Check Stock

Quictent 20x10x7ft 2 Zipper Mesh Doors Portable Greenhouse Large Heavy Duty Walk-in Green Garden Hot House 10 Vents Green Cover

  • √【New Feature Greenhouse-2 Mesh Zipper Doors & 10 Vents】-- 2 doors on each side of this greenhouse, plus mesh doors, can keep out small....
  • √【Translucent PE Cover】--Heavy duty 2 layers PE cover with reinforcement mesh into it. 100% waterproof, transparent cover can get 85% of the....
  • √【Powder Coated Connector Easy Installation】--There's no need to worry about rust as heavy duty steel frame is used which could make the whole....
  • √【Overlong Cover Design】--Overlong cover of the greenhouse makes the greenhouse airtight and secure. You can bury it into soil, or use brick,....
  • √【 Warranty】--①365-Day Warranty for All Poles, Connectors.
  • ③Lifetime Replacement for Ground Staples, Bases,....
Check Stock

SharkBite 25087 Faucet Installation Kit, Angle Stop, Plumbing Fitting Quarter Turn, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT

  • INSTALLS IN SECONDS: Shark Bite Faucet Installation Kit requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal.
  • PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications.
  • COPPER, PEX, CPVC, PE-RT: Shark Bite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination.
  • QUALITY: Only Shark Bite’s quality and performance is field-proven with more than 550 million connections. Shark Bite is the only push-to-connect brand that can ensure a clean, leak-free connection.
  • RESIDENTIAL and COMMERCIAL: All Shark Bite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 1/2 Inch x 3/4 Inch MHT Garden Valve Multi Turn Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE 24622LF

  • INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue.
  • Just push to create a quick watertight union with SharkBite pushfit....
  • COPPER, PEX, CPVC, PE-RT, HDPE: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC, PE-RT, and HDPE Pipe and connects them in any....
  • PERFORMANCE: Installing a hose bibb, adapter, connector, spigot, or shutoff, you can rely on a tight union as the pushfit connection bites into the....
  • QUALITY: Only SharkBite's quality and performance is field-proven.
  • SharkBite is the only push-to-connect brand than can ensure a clean, leak-free....
  • MADE IN THE USA: All SharkBite connectors, faucets, and adapters are manufactured and tested in the USA.
Check Stock