Best Pdh Optical Fiber Transmission

uxcell 3dB FC Fiber Optic Attenuator, FC/UPC to FC/UPC Single Mode 9/125 Adapter

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-15dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C，Output Power: -8.2~-1dBm，Receiver Sensivity: -11.5dBm，Interface: LC.
Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

HDMI OVER FIBER EXTENDER KIT: Extend an Ultra HD (UHD) 4K 60Hz HDMI 2.0 signal + 7.1 CH audio up to 3280ft (1km) over single mode or up to 985ft (300m) over multimode fiber cabling w/ an LC connector.
RELIABLE VIDEO TRANSMISSION: Fiber connection allows for uncompressed and uninterrupted video transmission & Electromagnetic interference (EMI) immunity and optical isolation for reliable signal integrity.
3x Status LEDs for power/optical link/HDMI link.
SERIAL AND IR EXTENSION: Extend serial or IR signals over the fiber cable.
IR control extension kit includes 2x IR Receivers & 2x IR Blasters (IR remote not included).
RS-232 terminal block connectors for device or display control (up to 115.2Kbps).
EASY INSTALLATION: Point to Point connection between AV transmitter and receiver.
No IP configuration/drivers/network equipment required.
Durable steel housing w/ built-in mounting hardware for a tidy installation.

...u just need to connect one end of the audio cable to the Optical/SPDIF/TOSLINK audio output port of the above applicable devices, and the other end to the RCA(L/R), 3.5mm AUX audio input port of sound box, amplifiers, headphones, to provide you with a superior stereo experience!.
【HD Sound Quality】 Optical fiber transmission signal is not subject to external RF and electromagnetic interference. Audio cable is made of elastic material, not hard in winter, resistant to pulling and not tangled. Aluminum alloy shell, oxygen-free copper conductor, gold-plated connectors, efficient transmission of optical fiber core, intelligent conversion chip, so you can enjoy theater-like shocking sound!.
Warm Tips: 1. The audio cable must be connected to the USB power supply to work. 2. Some Smart TVs do not have sound output after connecting the audio cable, please refer to the "Figure 6" setting on this detail page. (Different brands of TVs may have different settings)..

[MAIN PARAMETER]: LC/UPC Female to LC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

[MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..