Best Pcmcia Card Pci Card

UGREEN Gigabit Ethernet PCI Express PCI-E Network Controller Card 10 100 1000Mbps RJ45 LAN Adapter Converter for Desktop PC

With this PCI Card, you can add a 10/100/1000Mbps Ethernet port to any PC through a PCI slot.Fits any PCI Express x1, x2, x4, x8 or x16 socket.
This PCI-based 10/100/1000 Mbps Gigabit Ethernet Network Adapter Card provides a simple connection to a Gigabit Ethernet network, and is fully....
Gigabit PCI Network adapter Suitable for any PCI-enabled client, server or workstation, the Gigabit Ethernet Network Adapter Card supports high....
Gigabit network card Compatible with a broad range of operating systems, including Windows 11,10, 8/8.1, 98SE, ME, 2000, XP, XP-64bit, Vista,....
The high-quality PCI Gigabit NIC with a 12cm profile bracket and additional 8cm Profile Bracket makes it easy to install the card in a small form....

Add a parallel port and two RS-232 serial ports to your PC through a PCI expansion slot.
2S1P PCI Serial Parallel Combo Card with 16550 UART.
PCI RS232 Serial Card plus Parallel Port.
2x Serial and 1x Parallel Adapter Card / PCI Serial/Parallel Card Adapter / Serial RS232 Adapter Card with Parallel Port.
All three ports share only one IRQ which minimizes the system resources required to operate the card.

Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..

COST EFFECTIVE SOLUTION: Use this PCI LAN card to upgrade your existing system to include a 1 gigabit ethernet port.
VERSATILE FUNCTIONALITY: This PCI interface card comes with both standard and low-profile brackets for easy installation in your PCI-enabled client, server, or workstation.
1G SPEED: This PCI card is ideal for PCI ports that support 1GbE or less, supporting maximum data transfer speeds of 1000 Mbps in each direction (2000 Mbps total).
WIDELY COMPATIBLE: Compatible with a wide range of operating systems including Mac, Windows, and Linux, this NIC card is designed to work with your existing system.

PCI-E riser 4Pin molex,gold plated contacts for better connectivity and long life,and with side clip to fasten other card. No driver needed,slot with a fixed buckle, easy to remove the card and fi,xed , so that the card will not fall off from the slot.The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment..
60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Wire is relatively soft, easy alignment, easy to install in the main box..
PCI-E with multi-layer shielded wire, the longest can be connected to 3 Meter and will not attenuate the signal.PCI-E plug all gold-plated, more wear and increase the conductivity.PCI-E riser 4pin,gold plated contacts for better connectivity and long life,and with side clip to fasten other card..
Transfer card with SATA 15PIN interface to enhance power supply, so that the card from the motherboard independent of the board, so as to reduce the burden on the motherboard to accept the card..
Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard,dedicated for bitcoin mining..
Note:If you have any questions,please contact us asap,and we will try our best to help you.

With Gigabit Ethernet card, you can add a 10/100/1000Mbps Ethernet port to any PC through a PCI-E slot. Fits any PCI Express x1, x2, x4, x8 or x16 socket.
additional 8cm low-profile bracket provides the option for installation in small size HTPC case..
EDUP pci-based 10/100/1000 Mbps Gigabit Ethernet network adapter card provides a simple connection to a Gigabit Ethernet network, and is fully compatible with 802. 1Q virtual LAN (VLAN) tag. And Ethernet card which Is compliant to IEEE802. 3, IEEE802. 3U & IEEE802. 3ab..
Gigabit PCI network adapter Suitable for any pci-enabled client, server or workstation, The Gigabit Ethernet network adapter card Supports high Performance Dual channel networking and maximum data transfer speeds of 1000Mbps in each direction (2000 Mbps total) - up to ten times faster than 10/100 Ethernet..
Gigabit network card compatible with Windows 10, 8/8. 1, 2000, XP, Vista, 7. Please kindly note: This product does not support Linux or Mac OS..
The high quality PCI Gigabit NIC with 12cm profile bracket and additional 8cm profile bracket. Support: 2-year and free 24/7 technical support..

Gigabit PCI network card suitable for any phi-enabled client, server or workstation, The Gigabit Ethernet network adapter card Supports high Performance Dual channel networking. And maximum data transfer speeds of 1000Mbps in each direction. Up to ten times faster than 10/100 Ethernet..
Network adapter card fits any PCI Express x1, x2, x4, x8 or x16 socket. You can add a 10/100/1000Mbps Ethernet port to any PC through a Pie slot. Additional 8cm low-profile bracket provides the option for installation in small size HTPC case. Important Note: only work with PCI-E slot, not for PCI slot..
PCI-E Gigabit Ethernet Network Controller Card Chipset is RTL8111F. Supports IEEE 802. 1p Layer 2 Priority Encoding and IEEE802. 1q VLAN tagging..
Gigabit network card fully compliant with IEEE 802. 3, IEEE 802. 3U, IEEE 802. 3x and IEEE 802. 3ab standards. Supports a broad range of operating systems, including Windows 10/8. 1/7/Vista/XP/2003/2000. (You can download driver From EDUP website.
Network card: If you are not satisfied with this network card, Please feel free to Contact us via email: message or 18033060667@163. We will offer you a full refund or new replacement..

This PCMCIA Adapter for for Mercedes Benz Class S Series: before 2010.
Support standard SD card and SDHC card, Class 10 SD/SDHC Card is recommended. Capacity support UP to 32GB SDHC memory card..
How to use: format the SD card into FAT32 before use, copy MP3 files to the SD card..