Best Pcd Cbn Insert

MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-13mm Drill Bits… (MR-13A)

  • Easy to operate and does not need any prior sharpening experience,foolproof design able to sharpen drill bit within minutes.
  • Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
  • Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
  • Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material.The machine comes with CBN grinding wheel as standard..
  • Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Check Stock

Diablo by Freud D0704DH 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor, Multicolor

  • The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade.
  • The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades.
  • The laser cut thin kerf design gives fast and precise cuts with less dust and waste..
  • Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat.
Check Stock

MotoRad T-16 Radiator Cap

  • motorad radiator caps are made from high-quality components with proper relief and vacuum valves to meet all oem specifications. these caps are quality tested to stand up to even the most demanding automotive cooling systems..
  • motorad standard radiator caps make an excellent replacement for worn or faulty radiator caps, which occur over time. radiator caps are easy to install and remove because the caps shell turns interdependent of the sealing gasket, stem, and bottom plate..
  • motorad radiator pressure caps are designed and made to offer precise pressure control for the automotive cooling system. they are 100 percent tested to ensure the highest quality and longevity..
  • fits select chrysler prowler and mini cooper..
  • replaces cac4568, cac5095, eac4192, f4tz8100b, ccc6707, pcd100150, 5278697aa, 52014479aa, 5058997af, 15075565, 25661994, 25697430, 4592098, e9dz8100a, f1vy8100b, 861050, 6410665, 15977333, 5214500021, 8942287481, 9214506100, 9214506101, 5058997af, 52014479aa, pcd100150, 5278697aa, 5058997af, pcd100150, 97177848, 52014479aa..
Check Stock

BUCKTOOL 8Inch Low-Speed Bench Grinder fit CBN Wheel Professional Wobble-free Wheel Grinder, TDS-200C4HL

  • Powerful 1750RPM low-speed induction motor, Rating power 3/4Hp.
  • Peak power 1-1/4Hp, easy to drive CBN wheel.
  • Extra wide 1-1/2 Inch first-class WA grinding wheel(can work with 1-1/2 inch CBN wheel), best for carpenters, turners, carvers.
  • Left 8" x 1" x 5/8"(shaft) 80 grit, right 8" x 1-1/2" x 5/8"(shaft）120 grit.
  • Super 3Watts LED with individual switch, great for detail sharpen.
  • Angle adjustable eye shield includes one 3 times magnifying.
  • Luxury cast aluminum tool rest can adjust from 0-45 degree.
  • Cast iron base with rubber feet, vibration-free. Safety switch with key, avoid unauthorized operation.
Check Stock

Diablo D1006DH Cement Saw Blade multi 10

  • The only approved james hardier Polycrystalline diamond ( PCD ) tipped fiber cement saw blade. Developed by James hardy and Freud Diablo for all james....
  • The PCD triple chip design offers up to 60 times longer cutting life than standard Carbide blades.
  • The laser cut thin kerf design gives fast and precise cuts with less dust and waste.
  • Item Package Dimension: 14.0" L x 10.0" W x 10.0" H.
Check Stock

Drill Bit Sharpening Tool Portable Diamond Drill Bit Grinder for Drill Polishing Wheel Drill Bit Sharp Sharpener Universal Fits 1/4” (6.35mm) with Extra Corundum Grinding Wheel Screwdriver Wrench

  • 【Grinding wheel is optional:】 CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • 【Angle adjustable:】 point angle 100° (90 ) ~ 135° , adjust the grinding angle by changing the positioning pin, and control accurately..
  • 【11-Standard collet:】 Grinding range: ф3-ф13 (ф3, ф4, ф5, ф6, ф7, ф8, ф9, ф10, ф11, ф12, ф13).
  • 【Upgrade:】Upgrade the knife seat for more accurate positioning.
  • upgrade the grinding seat for more convenient grinding, put it in the collet, and it can be completed once in 180 °.
  • 【Strong DC motor:】 electronic control DC motor is stable frequency, strong horsepower, prolonged use and low noise..
Check Stock

Walter 15L853 FLEXCUT Mill Scale Flexible Grinding Wheel [Pack of 25] - 36 Grit

  • 5" diameter,6 PCD segments,5/8"-11 Thread..
  • Designed for remove stubbon coating, epoxy,glue,mastics and concrete floor coatings..
  • 6 pcs PCD segments guarantee high efficiency grinding removal and long life use..
  • Precision balanced test for vibration guarantee the stable when use..
Check Stock

MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-20mm Drill Bits… (MR-20G)

  • Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
  • Sharpens Standard Drill Bits – from 3mm" to 20mm" standard twist bits.Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
  • Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Check Stock

Freud D1208DH Diablo 12-Inch by 8 Tooth Polycrystalline Diamond Tipped TCG Hardie Fiber Cement Saw Blade, Multi

  • The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades.
  • Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Parma-Shield coating to reduce heat.
Check Stock