Best Pc Board Relay

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi

5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
Equiped with high-current relay, AC250V 10A.
Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..

NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
Module with overcurrent protection and relay diode freewheel protection..
NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.

The product operation guide can be obtained in the product guide and document. This Raspberry Pi expansion board supports Raspberry P.
The Relay Board gives your Raspberry Pi board the ability to control high voltage/high current devices, and easily makes normal home appliances become intelligent. Can be accessed programmatically or directly by shell. Up to 4 layers can be stacked..
Switch the I2C address of the device through the DIP switch on the circuit board to ensure that the four-layer module gets different addresses, thus avoiding the problem of address duplication..
The 4 Channel Relay uses high-quality relay modules combined with the most popular microcontroller technology to communicate with the Raspberry Pi. You can use mulitiple relay modules stacked together to add many channels.
The 4 Channel module is very fast, easy to install, and supports multi-language development, making it ideal for smart home projects.

Item 77119 (replaces the old 74618 as of September 10, 2013).
What is included: NewUpgraded IQ 2020 Heater Relay Board w/ Jumpers & Shortened Screws for the front cover of the IQ2020.
Description: New(New as of 9-10-2013) This IQ2020 Heater Relay Circuit Board is the newest revision for the 2001-2009.5 IQ2020 Control Box. It's....
Symptoms this part has failed: No power going to the heater even though the red HTR ON L.E.D. light is lit inside the IQ2020 control box. The heater....
Note: In older control boxes, you may encounter that a chip on this new heater relay board prevents the metal guard from seating properly and it may....

✔Easy to set up and easy to use. The relays are very simple to set up and use. Specifically designed to control a variety of electrical equipment via wireless signals..
✔Small size, stable and reliable performance, high receiving sensitivity. The relay is designed to be small and simple, does not take up space, and powerful performance can be used for a long time..
✔The relay supports fixed code and learning code, and supports 1-channel or 2-channel receiver relay switches, which fully meet the needs of different users..
✔Excellent security. The circuit board of the relay is safely packaged, the circuit board is exquisite, and the wiring is safe. Safety protection measures are perfected to protect your safety..
✔A wide range of applications. From simple home remote control to door, window, lifting equipment, access control, up and down controller, alarm system industrial control, security system and other automatic controllers can be used in various fields..

The Relay Board Maximum load: AC 250V/10A, DC 30V/10A.
Using SMD optocoupler isolation, strong driving capability, stable performance..
Can be set high or low level trigger with jumper cap, to meet the demand of more trigger applications..
Fault-tolerant design, even if the control line is broken, the relay will not move..
Wide Application,The relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc..

★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
★Equipped with high-current relay, AC250V 10A.
★The control signal voltage range: the trigger signal is low 0-2V.
★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.

Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..