Best Passive Components module

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • ...ble TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
  • Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port i....
Check Stock

Electric Skateboard ESC Kit, 10S 36V Single Drive ESC Substitute Control Mainboard with Remote for DIY Electric Skateboard Longboard

  • Made of high quality chip and electronic components, single drive design can offer excellent and stable performance..
  • The solid structure of mainboard can greatly lengthen the service life. With remote receiver module, so it supports remote control..
  • The well-organized circuit board is easy to install, but needs professional skills..
  • This electric longboard skateboard control system has EMP control module with remote module, it can do as ESC do..
  • With over-voltage, under-voltage, overheating, over-current​ protection, safe and reliable to use, supports speed control, easy to use. With a LED indicator that displays signal status, speed modes, battery percentage..
Check Stock

Gowoops GPS Module with 3m Active Antenna for Arduino STM32 51 Single Chip Microcomputer

  • 1. With micro USB port, you can use general mobile phone cable to connect the GPS module to your computer. Do not need USB-TTL, convenien for use..
  • 2. The GPS module has ceramic passive antenna, you can search the satelite in a open area, do not need the external antenna..
  • 3. With SMA port, convenient for connect with the 3m Active Antenna, stronger satelite search ability..
  • 4. With the reserved TTL port, covenient for connect to USB-TTL or external single chip microcomputer..
Check Stock

TOA Electronics HX-5 Variable Dispersion Line Array Indoor Speaker 8 Ohms Rated Impedance 600W Continuous program Single Black

  • TOA Electronics HX-5 Variable Dispersion Line Array Indoor Speaker - TOA Electronics 5 Year Warranty.
  • Four speaker modules ensure high power and high quality.
  • The changeable orientation of each of the four speaker modules independently allows the directivity angle of the speaker system to be adjusted.
  • Built-in passive network ensures appropriate sound quality.
  • Ideal for both permanent and temporary installations, including both vertical and horizontal positioning.
Check Stock

Klipsch RSA-500 500W Multiple Use In-Wall Subwoofer Amplifier (Each)

  • The Klipsch RSA-500 is a single channel amplifier designed to power a passive subwoofer (a subwoofer that has no internal amplifier).
  • Primarily designed for use with the Klipsch RW-5802 and RW-5101-C in wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer.
  • This amplifier pumps out 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules).
  • The RSA-500 offers standard input/output connectivity that will support any type of system.
  • Rack ears are included for fast and secure placement into any standard 19-inch rack.
Check Stock

Dpg-200 Vacuum Transducer with

  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

Allsop Cool Channel Platform LapDesk for Laptop Notebook Computers (29591)

  • Unique curved design keeps you and your laptop comfortable and cool.
  • Non-slip woven surface with engineered channels provides passive heat dissipation.
  • no USB port or batteries required, no moving parts.
  • C shape also acts as protective sleeve for laptop transport. Flip it over and your notebook can slide right into the channel and into your bag. Weighs less than a pound!.
  • TSA Safe, no metal components for easy airport security checks. Great travel accessory for laptops!.
  • Provides portable ergonomic comfort working on your lap or at a desk.
  • Supports up to 20 lbs, works with most laptops.
  • Product Dimensions 14.25 in (l) x 10.25 in (d) x 2.25 in (h).
  • Supports up to 20 lbs., Works with Most Notebooks.
  • Anti-Static Coated Fabric. Provides Ergonomic Comfort Working at Home or on the Road.
  • TSA Safe: No Metal Components for Easy Airport Security Checks.
  • Provides Passive Heat Dissipation to Keep Your Notebook Cool. No USB Port or Batteries Required.
  • Keep You and Your Notebook Comfortable and Cool.
Check Stock

Dorman 601-704 Seat Heater Control Module with Pigtail Kit for Select Ford/Lincoln Models

  • Convenient solution - this cost-effective seat heater control module with pigtail kit includes a replacement module and pigtail, saving hassle and expense of buying the two components separately from the dealer.
  • Restores functionality - when the original ground pin or pigtail connector fails, this direct replacement kit restores the comfort and convenience of heated seats to original standards.
  • Seamless replacement - module designed and tested to work exactly like the factory components for millions of select Ford and Lincoln vehicles.
  • Trustworthy quality - backed by a team of electrical engineers and product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ELEGOO UNO R3 Project Most Complete Starter Kit w/Tutorial Compatible with Arduino IDE (63 Items)

  • More than 200 components, this is the most complete starter kit you will find. Great value starter kit with 63 kinds of electronic components..
  • Has all the components you need and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD..
  • All the modules come soldered so they are easy to wire up..
  • Includes ELEGOO R3 controller board and USB cable, 100% compatible with Arduino IDE Official R3, Official kit..
  • Kit comes packaged in compartmentalized case with a bonus box for small parts like LED’s, IC’s, buttons, diodes, etc..
Check Stock