Best Parallel Ruler

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock

Multifunctional Drawing Ruler,Plastic Measuring Template Rulers Multipurpose Draw Round Curve Horizontal Parallel Line Vertical Parallel Line for Drawing Engineering Drafting School Office Supplies

  • Wide Applications: Versatile measuring ruler, with a protractor to draw the desired figure, can also draw arcs curve, horizontal parallel line,....
  • More Details: Each centimeter has a circle hole for drawing circles and ellipses.
  • Clear scale, easy sliding, stable drawing, not easy to skew, clear....
  • Multiple Uses: Whether you are an artist, student, pattern maker or designer, this measuring rolling ruler is a good helper for your work or study.
  • Quality Material: Made of transparent plastic.
  • It's light-weighted, easy to carry. Transparent material allows you to draw without ignoring some....
  • Draw all figures with this Multifunctional Ruler! Fast, accurate, no auxiliary lines!.
Check Stock

ZQYA Woodworking 350mm/13.7\ Adjustable Right Angle Ruler Alloy 45/90 Degree W/Bubble Level Gauge Metric and Imperial Measuring Tool Chamfer Gauges (Color : WZTR350)

  • Functions: 45-degree angle, 90-degree right-angle drawing line, parallel line, height gauge, sliding marking line, level meter.
Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

  • 【Multifunctional 3D Mitre Angle Ruler】The angle ruler has more than 10 functions, 10-in-1, which are: square, protractor, dovetail template, circular hole, parallel line, vertical line, drilling positioning, T-shaped dovetail joint, 45° angle, 90° angle, ten common angles to meet your different needs..
  • 【Tough & Durable Material】The 3D mitre angle measuring tool is made of high quality aluminum alloy material, high hardness, high toughness, non-toxic, rust-proof, durable and non-deformable, high-precision measurement and long life span. Compared with other plastic rulers, which is more durable and has higher accuracy..
  • 【High Measurement Accuracy】Superb carftsmanship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
  • 【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in ....
Check Stock

WeldingStop 6 in Machinist Ruler Scale 5R 10ths 1/100 1/32 1/64 Graduation Flexible Decimal Inch Steel Rule

  • This a 6 in machinist scale or 150mm length and 5R ruler rigid which is made by high quality Stainless Steel, it can be lightly flexible and thin.
  • 5R scale graduations have 10th and 100th on one side and quick-reading 32th and 64th machinist scale inch on the other side.
  • The sides of each machinist rule are ground parallel and each end is accurately ground square to allow reading from either end.
  • The ruler is 1/2'' or 12.5mm width, and 0.025'' or 0.6mm thickness. Both long edges are ground flat and straight.
  • All the scales are Laser Engraving, very clear and easy to read. This type of engraving can make the scale not easy to wear after long time using.
Check Stock

Woodworking T Square Ruler Aluminum Alloy Adjustable Angle Scriber Carpentry Scribing Tool Suitable for Woodworking Positioning and Marking 370mm

  • Sturdy and Durable: It is made of high-quality aluminum alloy material, and the surface is anodized, which is durable and has a long service life. It....
  • High Precision: The scale is clear and standard, the reading is clear, accurate and convenient, which makes the operation more precise, efficient,....
  • Specifications and Sizes: There are two styles of 170mm and 370mm scales to choose from, which can meet different needs.
  • Safety Protection: The overall design is humanized and angular, which can prevent safety problems caused by improper operation, protect your safety,....
  • Multi-purpose: This multifunctional ruler can mark horizontal lines, vertical lines, long lines, short lines, parallel lines, and right-angle lines.
Check Stock

POWERTEC 71227 24 Anodized Aluminum Straight Edge | Metal Straight Edge Machined Flat to Within 0.001” Over Full 24” - Professional Finishing Tools

  • FUNCTION: A cost effective alternative to determining table surface flatness, engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers and various others.
  • FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized.
  • ALUMINUM CONSTRUCTION: This heavy duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion.
  • VERSATILE: Can be used as a straight edge guide for machines, drafting tool, drawing bar, or even to check cylinder head distortion - the possibilities are endless.
  • SCALE: Straight edge ruler measures out to 24 inches long, 2 inches wide, with a 5/16” measuring surface width, and is equipped with a dual sided metric and standard ruler measurement system.
Check Stock

POWERTEC 71332 38 Anodized Aluminum Straight Edge | Metal Straight Edge Machined Flat to Within 0.003” Over Full 38” - Professional Finishing Tools

  • FUNCTION: A cost effective alternative to determining table surface flatness, engine block flatness, and can be used on other work surfaces, while also able to tune up and align machines such as jointers, planers and various others.
  • FEATURES: An ergonomic, thick profile with a ribbed reinforcement for easy gripping, with precision milled edges for true parallel and accurate straightness, plus a hanging hole on the end to help keep your precision woodworking tools organized.
  • ALUMINUM CONSTRUCTION: This heavy duty straight edge was engineered with lightweight anodized metal providing long-term durability and protection from everyday wear and abrasion.
  • VERSATILE: Can be used as a straight edge guide for machines, drafting tool, drawing bar, or even to check cylinder head distortion - the possibilities are endless.
  • SCALE: Straight edge ruler measures out to 38 inches long, 2 inches wide, with a 5/16” measuring surface width, and is equipped with a dual sided metric and standard ruler measurement system.
Check Stock

Multi Angle Tool Six-Sided Universal Ruler Tile Holes Measure Ruler with 5-Holes Positioning Apertures Aluminum Alloy Full Metal Drill Guide Locator Upgraded for Craftsmen,Father s Day Gift

  • DURABLE AND ERGONOMIC: Made of 5mm aluminum alloy with durable metal knobs and bolts, It`s more durable and quality than plastic one.Say goodbye to....
  • MULTIPLE APPLICATIONS: Set at 90-degree angles to space parallel pieces of wood, form into a T-Square to align your brick, even set your own distances....
  • EASY TO USE: Just place the template tool ruler onto your work area, slide the rulers into the shape needed, and tighten the screws.The innovative,....
  • ACCURATE ANGLE MEASUREMENT TOOL: This Six-Sided Aluminum Alloy Angle Template Tool is Laser engraved markings(inches & centimeters) perfect for....
  • PORTABLE & EASY to STORE -- The angle ruler is lightweight designed for handy use and can be folded for easy storage. A must having tool in your box!.
Check Stock