Best Parallel Clamp

2 Pack MFT Style Hold Down Clamp Long Bench Dog Clamp 3/4 Inch Dog Hole Clamp Woodworking Benchtop Quick Clamps Aluminum Alloy 19mm - Lengthened Version

  • Longer shaft can work on thicker boards, clamping capacity reach to 5.9 inch.
  • Bench dog clamp, no damage to the workpiece,simple operation.
  • Own them, give new vitality to the workbench.
  • All metal construction,the clamp is made of quality aluminum alloy and stainless steel.
  • Perfect workmanship,very well and neatly processed.
  • High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions.
  • Fit perfectly in 3/4 inch (19mm) holes and clamp very tightly without moving out of the borehole.
  • The cam is running perfectly parallel to the pressure plate which means pressure is well distributed.
Check Stock

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Yakamoz Universal Mini Drill Press Vise Clamp Table Bench Vice for Jewelry Walnut Nuclear Watch Repairing Clip On DIY Sculpture Craft Carving Bed Tool

  • Bench dog clamp, no damage to the workpiece,simple operation.
  • Own them, give new vitality to the workbench..
  • All metal construction,the clamp is made of quality aluminum alloy and stainless steel.
  • Perfect workmanship,very well and neatly processed..
  • The build is quite solid and holds firm, you do not need to be heavy handed with using,genuine one handed use if needs be..
  • High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions..
  • Fit perfectly in 3/4 inch (19mm) holes and clamp very tightly without moving out of the borehole.
  • The cam is running perfectly parallel to the pressure plate which means pressure is well distributed..
Check Stock

Champion Power Equipment 200951 2500-Watt Portable Inverter Generator, Ultralight & 100740 30-Amp ParaLINK Parallel Kit for Linking Two 2000 to 3000 Watt Inverter Generators, RV Ready

  • Product 1: ULTRA-LIGHTWEIGHT: At only 39 pounds, this inverter is one of the lightest 2500-watt inverters in the industry.
  • Product 1: QUIET OPERATION: 53 dBA from 23 feet is perfect for camping, tailgating or to backup a few home essentials, featuring 2500 starting watts, 1850 running watts and up to 11.5 hours run time.
  • Product 1: PARALLEL READY: The optional clip-on parallel kit enables this inverter to connect with another 2500-watt Champion inverter to double your output power.
  • Product 1: CLEAN POWER: Includes two covered 120V 20A household outlets with clean electricity (less than 3% THD).
  • Product 2: Equipped with enough power to start and run most 15,000 BTU RV air conditioners.
  • Product 2: Seamlessly integrates any two 2000-watt to 3000-watt ParaLINK ready inverters with a hand-tightened clamp for easy attachment.
  • Product 2: Parallel two lightweight and ultra-quiet inverters to get the power of a larger unit when you need it.
  • Product 2: 120V 30A (TT-30R) RV outlet and a 120V 30A locking outlet (L5-30R) with a 30-amp circuit breaker to prevent overloads.
Check Stock

Rotary Fly Tying Vise - Peak Fishing Vise With C-Clamp Mount

  • The PEAK Rotary Vise is designed for optimal tying efficiency and ease of adjustment. Materials (including Stainless Steel, Brass, Tool Steel, and Aircraft Aluminum) are chosen to last a lifetime..
  • Hardened and tempered tool steel jaws hold hooks securely, from size 2/0 (depending on exact hook wire diameter) down to the smallest you can buy..
  • C-Clamp Mount option is engineered to outperform the competition. Reverse the lower rabbeted jaw to get a grip range from 2-1/4" to 11/16"..
  • Jaws ride on precision guide rods holding the jaw faces parallel, there is no rotating clamp screw bearing against your table to damage the finish..
  • The deep rabbet engages rounded table edges so your vise won't rock..
Check Stock

Rockler HD Pipe Clamp Rack – Rack Helps to Store Heavy Duty Clamps – 12 Gauge Galvanized Steel Pipe Clamps – Store Full Rack of Clamps up to 60” Long - Garage Workshop Organizers & Storage

  • Rockler HD Clamp Rack: The customary way of storing pipe clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Easily store up to 60” heavy clamps at eye level and organized into two neat rows with our HD clamp rack..
  • Perfect For Storage: Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor..
  • Workshop Organization: With the Rockler HD pipe brackets clamp rack, you can say goodbye to untangling clamps! This quick clamps garage tool rack features stepped slots that accept both pipe clamps and parallel clamps..
  • Secure Hold: These racks are heavy-duty and hold woodworking pipe clamps securely. The clamps will not fall off even if bumped. The installation of these rack tool holders for your garage wall are pretty easy, it just requires lag bolts..
  • High Quality: This large pipe clamp storage rack is made of sturdy, 12 gauge steel & can support a full rack of bar clamps up to 60'' long. The footprint is very compact, saving you both wall space and floor space..
Check Stock

Vise Jaw Stop

  • Unique design stays completely below the top surface of vise jaws for cutter clearance..
  • Stop rod stays parallel to the milling machine table so workpiece will contact rod face squarely for increased accuracy..
  • Versatile design allows the 5/16" hardened stop rod to be quickly and accurately positioned..
  • Large 1/2-13" socket head cap screws rigidly clamp the unit in position after adjustments are made. 5/8" T-nut included..
  • PLEASE SEE MANUFACTURER WEBSITE FOR TECHNICAL DRAWING..
Check Stock

BESSEY KREV60, 60 In, Vario K Body REVO clamping system

  • Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force.
  • German high-quality profiled steel rail stock.
  • Easily converts to spreader without tools.
  • Many accessories and replacement parts available.
Check Stock

Laserjamb the JACK of all trades, Blue/Black

  • Quality Tool Steel Parallel Clamp of Jaw Length 2" (50 mm).
  • Precisely Ground for a Perfect Jaw Matching & Epoxy Black Finish for a Rust Free Life.
Check Stock