Best Paper Engraving Machine

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine, 5.5-7.5W Laser Power, DIY Engraver Tool for Metal/Glass Etching Kit/Wood Carving, Engraving

  • ...aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】 LATITOOL F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, and the engraving & cutting speed is faster than ordinary compressed light spot is increased by 60%, it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic....
Check Stock

ATOMSTACK A5 Pro Plus Higher Accuracy Laser Engraver, 5-6W Laser Cutter, 40W Laser Engraving Cutting Machine Laser Cutter Compressed Spot CNC Carving DIY for Wood, Acrylic, Metal, 15.8''x16.2'

  • 【DOUBLE COMPRESSION TECHNOLOGY】 The upgraded 40W laser engraving machine adopts double spot compression and quadruple lens condensing, which makes the light source more concentrated than other engraving machines, and the compressed spot range is 0.08mm and 0.06mm. The powerful light source makes the engraving ability stronger, and can easily cut 15mm light wood and 12mm acrylic board..
  • 【NEW EYE PROTECTION FUNCTION】 The laser eye shield can effectively filter 97% of UV rays, effectively protecting your eyes at all times. The included protective goggles, you do not need to buy extra, reduce the cost of your goggles, and at the same time can strengthen the eye protection, so that you can watch the working process of the engraving machine at any time..
  • 【EXCLUSIVE AIR-GATHERING HOOD DESIGN】 The upgraded laser module adds an exclusive air-gathering hood design, which can effectively prevent smoke from adhering to and destroying the lens of the laser, and the guaranteed life is 3-5 times longer than other engraving machines..
  • 【EXTENSIVE COMPATIBILITY】 Atomstack upgraded 40W laser machine is compatible with a variety of mature engraving software, such as LaserGRBL, LightBurn (paid), supports Win XP / Win 7 / Win 8 / XP / Win 10, also supports MA....
Check Stock

NEJE 3 N30820 Laser Engraver, 5.5-7.5w Output Power DIY Laser Engraver and Cutter Machine Support LightBurn, 0.08mm Ultra-Fine Focus, for Acrylic Wood and Glass ,170 x 170 mm(6.7'x6.7')

  • 【High Performance Module】NEJE 3 engraving machine with NEJE classic multi-function N30820 module，5.5-7.5w output power. With square focus, the minimum focus point can reach 0.08×0.08mm. The module is good at engraving with wood, rubber stamping, glass, transparent acrylic and cutting plywood, black acrylic, cloth, etc… The module has a built-in intelligent driver, which can dynamically adjust the fan for quieter use.
  • 【Appropriate Engraver Area】170 x 170 mm engraving area, the desktop professional engraver machine is tiny, beautiful and lightweight, portable and does not take up space, and is fully functional.It is the most cost-effective machine. The whole machine test only needs 4 screws to complete the installation. Suitable for beginners/entrepreneurs/engraver hobbyists/designers/housewives.
  • 【Applicable Engraver Materials】NEJE 3 portable engraving machine supports engraving wood, MDF, leather, paper, cotton and other materials.Cover spraying can engrave stainless steel, glass, transparent acrylic and so on.The machine is compatible with mature engraving software on the market (LaserGRBL, Lightburn) and beginner-friendly software (NEJE 3).
  • 【Security Protect】Safety is always the top priority.NEJE 3 cutting and engraving machine has....
Check Stock

Twotrees TTS-25 Laser Engraving Machine 32 Bit Motherboard, Laser Engraver for Plywood Wood Leather, WiFi and App Control, Fixed Focus Laser Power: 2.5W, Working Area: 300x300mm

  • Fixed Focus Laser: TTS-25 uses fixed focus laser, no need to adjust the focus before engraving, engraving accuracy: 0.1mm. Laser power: 2.5W, machine output power: 20W..
  • 32-bit Motherboard: The motherboard adopts 32-bit dual-core MCU, which has a faster processing speed, and the engraving speed can reach 10000mm/min. Laser can engrave online and TF card offline engraving. Due to the built-in WIFI module, you can also use mobile phone App and computer WEB for engraving..
  • Software Compatibility: Twotrees TTS-25/55 series engraving machines are compatible with most engraving software. For example, free software: LaserGRBL (for Windows), paid software: Lightburn (for Windows, Mac), mobile app: MKSLaser (for Android and IOS system), can be downloaded from the mobile store..
  • Capability of engraving and cutting: TTS-25 is mainly used for engraving. TTS-25 laser can engrave wood, plywood, paper, leather, bamboo, sponge paper, alumina, etc. Laser can cut 2mm plywood. Working Area: 300x300mm..
  • New upgrade: Twotrees TTS-25 XY-axis aluminum profile with measurements, 32-bit motherboard. Independent power switch. Magnetic laser protective cover, CNC Z-axis height adjuster, corrugated management line, multi-stage metal positioning column, etc. If you have any que....
Check Stock

LaserPecker L1 Laser Engraver, Mini Engraving Machine Portable Laser Etcher, Compressed Spot High Precision Grabadora Laser with Protective Goggles - Black

  • ... Useful Mini Laser Engraver: Do you want to create inspiration anytime at home? Or want to make exclusive gifts for your friends and family during the holiday season? Or want to customize your logo in small batches? LaserPecker L1 Laser Engraver meet your needs!.
  • LaserPecker L1 Laser Engraver: 0.3mm Compressed Spot, engraving range: 3.9″*3.9″. Focal length: 7.5″(the distance from laser unit to the surface of engraved item). Support power supply through 5V 2A mobile power supply. COULD ENGRAVEING: Wood, Kraft paper, Leather, Fruit, Felt etc. COULDN’T ENGRAVEING: Metal, Glass, plastic, stone..
  • Compact Design: LaserPecker L1 Engraving Machine is very small size, only 2.6″ * 2.4″ * 2.1″, Weight 6 oz, can be mastered in one hand, it is a real handheld laser engraving machine. Perfect for entry-level creators, you can do a lot of inspiration without expensive prices and taking up less space..
  • Durable and Safe: Laser etching machine with high quality 1.6W laser head make durablity, better stability and long working time. Multiple safety features such as Working warning alert, Displacement automatically stops when engraving, Overheat shutdown, Enter password before work will keep you safe from accidents. Safe Certification: CE, FCC, FDA, RoHS, CDR....
Check Stock

Latitool F50 Laser Engraver, 50W Laser Engraving Cutting Machine for Multi-Material,5.5~7.5W Laser Power, Compressed Spot CNC Carving DIY Laser Master, Maximum Engraving Pattern 410x410mm

  • ...CB board, aluminum oxide, non-reflective plating and lacquered metal, ceramics. You can engrave your own logo for your favorite items.
  • 【Newly upgraded compressed spot laser shaping technology】F50 adopts the latest 5W laser beam shaping technology diode laser, with an ultra-fine laser focus of 0.08mm, the minimum engraving accuracy is 0.01mm，with super cutting penetration and precision, , it can cut 12mm thick wood, 8mm acrylic, engraved ceramic and stainless steel, which can meet your engraving and cutting needs to a greater extent.
  • 【Sturdy Structure&Easy Installation】 LATITOOL F50 laser engraver adopts an all-metal structural frame, which makes the machine more stable and durable, and improves the engraving accuracy. F50 entire engraving machine adopts a modular design, which is easy to assemble, repair and update machine parts. 60% pre-installed delivery, you only need 4 simple steps to install successfully, it only takes 10-15 minutes to complete the installation of the entire device.
  • 【180° Panoramic Visible】 UV filter-retardant acrylic on laser module can filter 97% of the ultraviolet light, protecting your eyes and people around you，and special design with 180° panoramic viewing area, can be enjoy to watching your artworks produci....
Check Stock

DIY CNC Engraver Kits Wood Carving Engraving Cutting Machine Desktop Printer Logo Picture Marking, 40x50cm,2 Axis (2500MW)

  • This 2500MW DIY desktop engraving machine is ideal for amateur engraving usage with grayscale printing,low-light positioning and freedom positioning functions..
  • Can be processed material Wood , paper, bamboo, horns, a little leather (wallet),phone shell , photosensitive chapter, sponge paper.
  • It only need you to connect it to the computer,then you can print any pictures your like with your own creativity..
  • Specifications: Construction: Body Aluminum + Acrylic Voltage:（12V 5A)110~240V Engraving area: 40x50cm.
  • Applicable system(s):XP/win7/win8/win10 ，Mac is not compatible.
Check Stock

DIY CNC Engraver Kits Wood Carving Engraving Cutting Machine Desktop Printer Logo Picture Marking, 40x50cm,2 Axis (500MW)

  • This 500MW DIY desktop engraving machine is ideal for amateur engraving usage with grayscale printing,low-light positioning and freedom positioning functions..
  • Can be processed material Wood , paper, bamboo, horns, a little leather (wallet),phone shell , photosensitive chapter, sponge paper.
  • It only need you to connect it to the computer,then you can print any pictures your like with your own creativity..
  • Specifications: Construction: Body Aluminum + Acrylic Voltage:（12V 5A)110~240V Engraving area: 40x50cm.
  • Applicable system(s):XP/win7/win8/win10 ，Mac is not compatible.
Check Stock