Best Packing Cutting Tool

Vikky 5 inch cordless angle grinder, brushless 20V 4.2 lithium-ion cordless grinder, grinding wheel with a diameter of 125 mm, for cutting and grinding

  • ...of the user, a quick-change wheel release that controls the Tool-free removal of the wheel and restart protection to avoid accidental start-up..
  • Tool Guard and Dust Cover - The grinder comes with a tool guard that protects you from projected debris. It is also equipped with a dust cover to prevent any kind of dirt. (Packing list : 1 angle grinder, 1 cutting disc, 1 grinding disc, charger, 1 4.2 Ah battery,1 chuck wrench).
Check Stock

IDL Packaging - PPSK.600.400 Portable 1/2\ x 400' Polypropylene (PP) Strapping Kit, 600 lbs Break Strength – Packaging Poly Strapping Solution – Reusable Banding Kit – Enough Strapping and Seals for 200 Uses Before

  • The tensioner tighgtens plastic strap by rotary, which can achieve better strapping effect.
  • With cutting groove, the tensioner can also cut off plastic strap easily..
  • Tighten plastic strap, then seal the gap finally cut off the strap. Only need 3 steps to complete packing..
  • Compact and portable, suitable for all kinds of operating conditions.
  • Applicable for various PET/PP plastic strap, an ideal hand tool set for strapping, sealing and packing..
Check Stock

OSCARBIDE 3/4'' x 10'' Indexable Boring Bar with 10 Pieces Carbide Inserts CCMT09T304(CCMT32.5),Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 3/4" Shank Diameter, Overall Length 10”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 3/4'' x 10'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

  • Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
  • Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Qunzhao Cuticle Scissors for Women and Men Curved Stainless Steel with Tip Grooming Blades Manicure Nail for Dry Skin Nail Scissors (2)

  • Professional Cuticle Scissors Curved from are made of high-density steel.
  • Packing: The elegant case is very convenient - great for travel or home.
  • Design enables cutting extremly precise by any angles and shapes - for cutting cuticles.
  • Scissors blade more curved and more fit,make the manicure tools have a better angle to trimming cuticle&dead skin and will not block the view..
  • Manicurist tools ,it is a professional nail beauty tool cuticle remover you must have..
  • The blade of the scissors is hand-polished, and the length of the blade has a slight error of 1-2mm..
Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

  • Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
  • Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
  • Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).
Check Stock

Jancy Slugger by Fein - HSS Nova Annular Cutter Set Tool with Premium M2 High Speed Steel - 3/4\ Straight Shank, 2\ Depth, 7/16\ - 1-1/16\ Diameter, 11 pc. Set - 63134999020

  • PREMIUM MATERIAL - Made of tough high speed steel material, good toughness and high heat resistance, sharp and sturdy and longer service life..
  • APPLICATION MATERIAL - Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • ANNULAR CUTTER ADVANTAGE - The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material, has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • WIDE APPLICATION - Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • PACKING INCLUDED - Includes 11 cutters ( Cutting Diameter:7/16.
Check Stock

MABUARN 5/16 Shank Nickel Plated Turning Holders 7 Sets CNC Lathe Turning Tool Holders with Indexable Carbide Inserts for Turning Grooving Cutting Threading

  • Turning tool holders material: High speed steel.
  • 5/16" (8mm) shank. Indexable Inserts material: tungsten carbide. Stable and durable..
  • Surface treatment: Nickel plated, quenching and hardening..
  • Model of 7 pieces turning tool holders: MGEHR0808-2, SER0808H11, SDNCN0808H07, SDJCR0808H07, SWLCR0808H04, SCLCR0808H06, SCLCL0808H06. Model of 7 pieces applicable inserts: MGMN200, 11ER AG60, DCMT070204, WCMT040208, CCMT060204.
  • Suitable for: CNC lathe external turning, threading, grooving, cutting, etc..
  • Packing includes: 7 pieces turning holders, 7 pieces carbide inserts, 3 pieces keys, and 1 piece aluminum case..
Check Stock

Elegant Black Square Ceramic Watch Band 22mm Quick Release Tapered Watch Straps for Women Men Metal Deployment Clasp

  • Like diamond cutting craftsmanship achieves the shape of a quadrangular pyramid release a soft ceramic luster..
  • Ceramic Link Design: Exquisite craftsmanship ensure its toughness and durability in use. High quality ceramics makes the band is smooth and compact.
  • Tapered from 20mm/22mm lug into 15mm/17mm buckle size. The sleek watch strap has an absolutely flat and smooth transition..
  • Easily Adjustable Band Length: 7.09 inches / 180mm, fit 5.91"-8.27" (150-210mm) wrist.
  • Packing Contain: 1 x Ceramic Watch Band, 1 x Link Removal Tool, 1 x Spring Pin Tool, 4 x Quick Release Spring Pins. 12 Months Hassle-Free Services: We will provide a prompt and courteous service for any problem you concern about. Please contact us without hesitation..
Check Stock