Best Oxygen Sensor Wrench

ARTILAURA 2-1/16" 52mm Air/Fuel Ratio Gauge LED Digital Display with Narrowband O2 Oxygen Sensor Car Gauge for 12V Car

  • 【Function】Numbers clearly show, LED backlit for easy reading in the darkness..
  • 【Range】 2-1/16" (52mm) gauge with black dial. Air/Fuel Ratio readings from 10.00 to 20.00 AFR..
  • 【Applicability】Air Fuel Ratio gauge compatible for 12 volt car. High sensitivity and easy operation..
  • ✅【Oxygen Sensor】Oxygen Sensor OEM:0258006028, Working Voltage: DC12V, Spiral: M18*1.5, Use Wrench: 22mm, Output Voltage: Maximum value ≥900mv/ minimum value ≤50mv..
  • ⭐⭐⭐⭐⭐［After-Sale Guarantee］Includes 1x Air Fuel AFR Gauge, 1x Narrowband Oxygen Sensor, 1x English Manual. Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions..
Check Stock

EWK 22mm 7/8 Inch O2 Oxygen Sensor Flex Head Wrench Removal Tool

  • 【 Flexible Operation 】Goes into narrow space and odd angles with the unique contour handle. EWK oxygen sensor removal tool works around the exhaust and gets to places ordinary wrenches won't. Easy to remove or install the hard-to-reach and stuck O2 sensors..
  • 【 Extra Leverage 】Swiveled head helps create extra leverage in narrow areas. The 22mm oxygen sensor wrench helps getting additional clearance during the job. Effortlessly turns the removal job into a breeze..
  • 【 Slotted Design 】 Get to the O2 sensor from the side to prevent damaging the wire or the sensor. Keeping the wire harness attached by getting to the sensor from the side instead of from the top..
  • 【 Great Compatibility 】EWK O2 sensor remover is designed to work on 7/8″(22mm) O2 sensors. Compatible for Ford contours, 4.6L, 5.4L Ford modular engines. Covers most vehicles on the market..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..
Check Stock

5 PCS Automotive O2 Oxygen Sensor Socket Offset Wrench Remover Tool and Thread Chaser Tool

  • 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

  • Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
  • Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
  • USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
  • Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
  • Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Automotive Oxygen Sensor Socket Removal Tool Wrench and Thread Chaser Set 5Pcs

  • Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines..
  • Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance..
  • Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire..
  • Warranty: We offer 30 days and 365 days free replacement warranty..
Check Stock

Tribus Tools Oxygen and NOx Sensor Wrench (15/16\)

  • [SIZE]: 3 piece 3/8 & 1/2" drive O2 oxygen sensor wrench socket tool set.
  • universal 7/8"/22mm professional grade removal tool for cars & automotive.
  • [ITEM INCLUDES]: 1 vacuum switch socket & 2 puller sockets kit.
  • [MATERIAL]: Constructed of high performance (cr-v & cr-mo) vanadium and chrome molybdenum solid cast steel for strength and durability - finished with black oxide to prevent rust.
  • [APPLICATION]: Remove and install oxygen sensors and hex vacuum switches on vehicles.
  • [PACKAGE]: Packed in a blow-molded storage case.
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • Application: This socket set is designed for the removal inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
Check Stock

Metal Oxygen Tank Key Oxygen Cylinder Wrench for CGA 870 Standard Post Valves

  • Strong & Sturdy Metal: The medical oxygen cylinder is stronger than the plastic one..
  • This cylinder wrench with durable metal, no longer worry about your oxygen key breaking while tightening oxygen regulators..
  • The heavy duty metal key is easy to turn on and off oxygen cylinder..
  • The flexible cable of the oxygen tank key is handy to attach to regulator as to not misplace it..
  • The oxygen key wrench fits home oxygen tank with CGA870(M2, A(M4), B(M6), C(M9), D(M15), E(M24), JD(M22) and ML6)..
Check Stock

Oxygen Sensor Replace OE Part # Bosch 17014 17315 Upstream Oxygen Sensor

  • Fitments: The 17014 oxygen sensor is fit for 2004-2006 Rolls-Royce. Please double check the fitment before your purchase. And you can get a more....
  • Replace OE #: The Apeixoto oxygen sensor is designed and manufactured with OE standard and can be replaced directly with fitted vehicles. The....
  • Function: Oxygen sensor is a key part to reduce the harmful emission and the increase the fuel efficiency. The Apeixoto oxygen sensor is wrapped with....
  • Solid Quality: Every sensor is 100% tested before shipping..
  • Warranty: You are backed by our Performance Assurance. this oxygen sensor comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited....
Check Stock