Best Oxygen Control Unit

8MILELAKE 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome.
Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2"".
Drive Ratchet Depending On The Size of The Socket 10Pc Oxygen Sensor & Diesel Injection Oil.
Pressure Unit Vacuum Switches Socket Set Heat Treated Chrome Vanadium & Chrome Molybdenu.

TECHNOLOGY - 33, 000 BTU Unit operates off Liquid Propane Gas (Only) Blue Flame Heater which Heats up to 1, 300 sq. ft. Area..
DEPENDABLE - Manual on/off control offers the most customizable heat settings, Ideal for greater heat flow that could add the warm atmosphere in your room..
STYLISH - 8 hand painted realistic detailed logs using superior ceramic fiber material give a stunning look..
ECONOMICAL - 99. 9% efficient with Vent Free gas burner. No outside duct or chimney needed! Environmental Protection and Energy Conservation..
SAFE - Battery Assisted Piezo ignition with Built-in pilot oxygen depletion sensor (ODS) immediately shuts down the heater if carbon monoxide or lack of oxygen is detected..

Automatic temperature compensation range: 0 ~ 40 ℃.
Response time: 003c30s (20 ℃ when the 90% response).
Dissolved oxygen Measurement range: (0 ~ 20) mg/L.
Dissolved oxygen Basic error: + / - 0.3mg/L.
Product Overview: The instrument can be divided into two parts: sensor and electronic unit. The sensor film type polarographic oxygen electrode. The electronic unit is composed of a high integrated circuit. Instrument using dot matrix liquid crystal display, can display dissolved oxygen value and temperature..

Dual Fuel Helmets technology allows the unit to be operated with Liquid Propane or Natural Gas, 20,000 BTU/hr. - heats up to 700 square feet.
Blue flame technology works by convecting heat to warm the air the same way as a central heating system, Thermostat control knob automatically maintains your IDEAL heat level..
Features an oxygen depletion sensor and an auto safety shut-off, No electricity required allows for reliable back-up heating incase of an emergency situation.
Dual Fuel Helmets technology allows the unit to be operated with Liquid Propane or Natural Gas.
Included.Theromostat, Base Legs and wall mounting hardware.
Prior to placing your order, please check local and state codes to determine if vent-free heaters are permitted in your locality.

21Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
Most comprehensive kit available. Features extended and reinforced socket body removes the most stubborn sensors without rounding them off.
Automotive 6pt and 12pt sensor sockets set for installing and removing oxygen sensors, injectors and thermal switches.
7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket.
Universal Vacuum Switch PVS, TVS Socket Tool.

... capable of heating up to 450 square feet of enclosed space.
Effortless Use: In addition to its impressive technical capacity, the Big Buddy Portable Heater features a variety of elements that enable effortless use and maximum performance. With its easy-start four-position control, fold-down handle, swivel-out fuel connection and a large overall heating surface, this unit raises the bar when it comes to portability and distinction in heating.
Safe Heating: The Big Buddy Portable Heater is built for safety and features an Oxygen Depletion Sensor (ODS) and tip-over detection system which accounts for low oxygen or accidental falls and automatically turns off the unit, ensuring safety and ease of use for a long time to come.
Brass Propane Tank Refill Adapter: With the Mr. Heater Propane Tank Refill Adapter, it only takes a minute or less to refill a 1 lb propane bottle. The adapter features a solid brass construction, a brass nipple to open the safety valve and a rubber gasket for sealing.

There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air..
The second way to provide oxygen to the brine shrimp from the bottom hole of the incubator. Please note the direction of the inlet and outlet of the check valve and the pipe must be installed correctly, otherwise the air pump will not be able to output air, and the trim valve needs to be opened. When the brine shrimp has hatched, first turn off the trim valve, then pull out the air pump tube from the trim valve, and then open the trim valve to start collecting brine shrimp.

Dual Fuel Helmets technology allows the unit to be operated with Liquid Propane or Natural Gas ， 10,000 BTU/hr. - heats up to 300 square feet..
Blue flame technology works by convecting heat to warm the air the same way as a central heating system. Thermostat control knob automatically maintains your IDEAL heat level.
Features an oxygen depletion sensor and an auto safety shut-off, No electricity required allows for reliable back-up heating incase of an emergency situation.
Dual Fuel Helmets technology allows the unit to be operated with Liquid Propane or Natural Gas.
Included.Theromostat and wall mounting hardware.
Prior to placing your order, please check local and state codes to determine if vent-free heaters are permitted in your locality.

Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
Durable blow mold case for safe storage and tool retention.