Best Optic Amplifier Catv

PacSatSales - Fiber Optic Patch Cable - Single Mode - SIMPLEX - OS1-9/125um (1M, LC to SC)

  • COMMERCIAL GRADE CABLES – Our Industry proven Single mode Fiber patch cable range are perfect for the demands of Fiber Professionals..
  • QUALITY RATED – This Singlemode fiber meets all UL, cUL, IEC & RoHS standards. Our SM SX fiber patch cables are OS1 9/125 – ideal for all Single-mode fiber networks including CATV type FTTH, FTTB & FTTP systems..
  • RELIABLY TESTED – Every Optical fiber cable is tested for insertion loss to ensure a high quality end product. We rely on these network patch cables for use within our clients fiber networks across the USA..
  • PRODUCT DETAILS – Connector range includes – SC/APC, UPC, LC, FC, SC, ST FC/APC ends. Mode: 9/125μm. Wavelength: 1310nm to 1550nm. Jacket Material: PVC (default)/LSZH/OFNP. Jacket Color: Yellow. OD: standards 2.0/3.0 (default)/0.9/3.0mm.
  • TRUSTED SUPPLIER – Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We independently source our own brand high spec suite of fiber optic products for HDTV, SDI, and Analog MATV systems..
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • Professional-grade cable TV and antenna signal amplifier with high 50dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/di....
Check Stock

Fiber Visual Fault Locator 30mW 30KM, VFL Fiber Optic Cable Tester Meter, Red Light Pen Tester Adapt LC/FC/SC/ST Interface, Fiber Network Cable Test Kit Fiber Light Source Testers(Aluminum)

  • 【Accurate Identification】This visual fault locator can easily and accurately detect and locate fiber optic breaks, poor connections, bending or cracking. It can operate either in CW or Pulsed mode. VFL will emit a 650nm red light for fiber tracing and locating, breaks or faults will refract the light in the fiber..
  • 【Excellent Functions】The fiber tester multiple functions include constant output power, lower battery warning, long battery life, and long-distance detection. Fiber routing and continuity checking efficiently, creating a bright glow around the faulty area..
  • 【Wide Application】Universal 2.5mm connector designed for LC, ST, SC, FC interferes both in the circle and square shape of different fiber optic cables, test for both single-mode and multi-mode cables. Apply To: Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
  • 【Detection Distance】This visual fault locator has a strong light source output power of 30mW, constant output power the strong red light goes 20-30 kilometers far in fiber optic cable, high effective power circuits provide stable power, continuous-wave and pulsed ....
Check Stock

Digital Music Changer Player Media CD Changer MP3 for Honda Goldwing 1800 GL1800 2001-2015

  • Decode for Bose Harman Kardon with optical interface. This optic fiber decoder box will keep your original car's optical fiber amplifier or sound sytem(for Harmon Kardon or for Bose) work..
  • It is compatiable with android radio and window CE stereo for Porsche 911(2005-2012), for Porsche boxster(2005-2012),for Porsche cayman(2004-2012)..
  • The MOST box is for Mercedes-Benz ML(2005-2011), for Mercedes-Benz GL(2005-2011), for Mercedes-Benz R(2005-2011), for Mercedes-Benz E(2009-2012), for Mercedes-Benz CLS(2009-2012), for Mercedes-Benz SLK(2009-2012)..
  • If your above compatible vehicle has the factory navigation or amplifier system (for JBL BOSE Harman Kardon, etc.) installed, you need bypass these amplifier with the fiber optic decoder..
  • Reduce installation fee,easy to install. All cables just need to be connected in front..
Check Stock

FiberShack - 3 Hole Fiber Stripper with 6' TPR Handle - Fiber Optic Stripper includes 1.5mm Hex Key for Fine Adjustments of Fiber Striper

  • INDUSTRY PROVEN DESIGN: Our Fiber Cable Stripping tool is field tested to deliver consistent performance. Ideal for use with both FTTH and industrial FTTX, FTTB & FTTP systems..
  • ADJUST WITH EASE : Precision tune your Fiber Cutter tool with a 1.5mm Allen Key included. Our Fiber Cable Cutter hex key ensures more accurate cable cuts than a conventional fiber optic tool.
  • QUALITY DESIGN - Every fiber optic cable stripping tool has a Thermoplastic handle and is tested after production to ensure a consistent high quality cut out of the box.
  • CUT DEPTH RANGES: Hole 1 - 1.6 > 3 mm fiber jacket cuts down to the 600 - 900 micron buffer coating. Hole 2: strips the 600-900 micron buffer coating down to the 250 micron coating. Hole 3: cleanly strips the 250 micron cable down to the glass fiber..
  • TRUSTED SUPPLIER - Since 1989, Pacific Satellite Inc has been installing commercial CATV systems and networks throughout the USA. We always found it difficult to source raw materials for jobs at short notice, and at a good price. So we started to source our own fiber products for HDTV, SDI, and Analog MATV systems. This need has created our brand, Fibershack, your mission critical supplier for all Fiber Optic needs..
Check Stock

Taidacent AD8015 Wideband/Differential Output Transimpedance Amplifier Module Single-Ended to Differential 240M Bandwidth 155Mbps Data Rate

  • The AD8015 is a wide bandwidth, single supply transimpedance amplifier optimized for use in a fiber optic receiver circuit. It is a complete, single chip solution for converting photodiode current into a differential voltage output..
  • The 240 MHz bandwidth enables AD8015 application in FDDI receivers and SONET/SDH receivers with data rates up to 155 Mbps. This high bandwidth supports data rates beyond 300 Mbps. The differential outputs drive ECL directly, or can drive a comparator/ fiber optic post amplifier..
  • In addition to fiber optic applications, this low cost, silicon alternative to GaAs-based transimpedance amplifiers is ideal for systems requiring a wide dynamic range preamplifier or singleended to differential conversion..
  • Application: Fiber Receiver: SONET/SDH, FDDI, Fibre Channel Stable High Capacitance Detector.
Check Stock

GESD Visual Fault Locator 30km Fiber Optic Cable Tester Meter Red Light VFL with 2.5mm Universal Connector for FC/SC/ST Adapter Pen for CATV Telecommunications Engineering Maintenance

  • Practical Design & Excellent FunctionPortable VFL Pen:Small size lightweight type is easy to field testCrash-proof & Dust-proof: Metal pen body With low battery detection indicator,This Visual Fault Locator Can Operates Either In CW Or Pulsed Mode,Fiber optic vfl lighting 2Hz glint or continuous output..
  • Accurate IdentificationEasily and accurately detect locate fiber breaks,poor connections,bending or crackingVisual Fault Locator will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output power Design with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
Check Stock

Visual Fault Locator 30KM, VFL Fiber Optic Light Source Tester 30mW, Red Light Pen Equipment for 2.5mm Universal Connector, FC/SC/ST/LC Adapter for CATV Telecommunications, Fiber Network Cable Test

  • Practical Design & Excellent FunctionPortable VFL Pen:Small size lightweight type is easy to field testCrash-proof & Dust-proof:Metal pen body with low battery detection indicator,This VFL light Can Operates Either In CW Or Pulsed Mode,Fiber optic vfl lighting 2Hz glint or continuous output..
  • Accurate IdentificationAccurately detect and locate fiber breaks,poor connections,bending or crackingVisual Fault Locator will emit a 650nm bright light for fiber tracing,breaks or faults in the fiber will refract the lightFiber Routing and Continuity Checking Efficiently,Creating A Bright Glow Around The Faulty Area..
  • 30KM Detection Distance & DurableStrong Light Source & Strong Penetration:30 Output Power easily penetrate 30KM of optical fiber,Continuous Wave and Pulsed Mode, constant output powerDesign with Stainless Steel Head and Aluminium Body to prevent crash and dust,the case ground design prevents ESD damage efficiently..
  • Wide ApplicationUniversal 2.5mm connector designed for LC,ST,SC,FC interferes both in circle and square shape of different fiber optic cables,test for both single-mode and multi-mode cablesApply To:Integrated wiring systems and Fiber Optic engineering.
  • CATV Engineering optic network Maintenance.
Check Stock

FTTH Fiber Cold Connection Tool Kit 19 in 1 with FC-6S Fiber Cleaver 10KM Visual Fault Locator Optical Power Meter Cable Tester Stripping Tool

  • 10KM aluminum alloy visual fault locator fiber optic cable tester meter for CATV test,Universally connector for test different ST,SC,FC interfaces.
  • Handheld fiber optical power meter FC ,SC cable tester,Wavelength range: 800~1700,Power measurement range: -70~+10.
Check Stock