Best Oil Pressure Switch With Nema Ratings

Goulds-J7S Single Nose Shallow Well Goulds-Jet Pump 3/4HP

• See all sketch images for more details, NEMA standard, 60 Hz, 3/4HP, 115/230 V capacitor start, single phase, 3500 RPM.
• Built-in overload with automatic reset, stainless steel shaft, pressure regulator included..
• Rotation: Clockwise when viewed from motor end, UL778 listed.
• Pipe connections: 1. 25" Npt suction and 1" Npt discharge, pressure switch: as4 preset (30-50 PSI)..

W.E. Anderson® Vane Flow Switch, FS-2, 1\ MNPT, Low Cost, Field Adjustable Set Point & Paddle

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

• ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
• EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
• FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
• PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....

Star JHU07 3/4 HP Cast Iron Convertible Jet Pump for Shallow or Deep Wells, Made in the USA using a Majority of U.S. Content

• Cast iron 3/4 HP convertible well jet pump made in the USA using a Majority of US Content – includes pump, motor, pressure regulator body, flow control screw and pressure switch (order ejector and pressure gauge separately).
• Designed for use with single pipe shallow wells with suction lifts from 0' to 25 feet AND dual pipe deep wells with suction lifts up to 110 feet (See capacity charts for specific performance and ejector models).
• 115/230 dual voltage continuous duty uni-frame 56 motor (NEMA J adaptable) with capacitor start provides maximum starting torque and thermal overload protects against overheating.
• Sturdy cast iron construction includes ejector for easy serviceability, pressure switch, special priming port for easy priming, carbon/ceramic mechanical shaft seal, and easy access drain plug for winterizing.
• 100% factory tested and covered by Star Water Systems 2-year limited warranty.

Oil Pressure Sensor Engine Oil Pressure Switch Sensor, 0 to 10 Bars 1/8 NPT Oil Pressure Sensor Gauge Sender for Diesel Generator

• EASY INSTALLATION: The engine oil pressure switch sender is compact design for easy portability and storage, easy to install and use.
• DURABLE: The engine oil pressure switch sensor adopts with top grade aluminium alloy, resistant to high temperature from -25 to 100 degree, can increase service life.
• PRESSURE RESISTANCE: The oil pressure gauge sensor is resistant to high pressure up to 10 bar, can meet your use.
• PRACTICAL: The engine oil pressure sensor has 1/8" NPT male thread for connecting to male threaded pipe fittings, very practical in work and life.
• WIDELY APPLICATIONS: The oil pressure sensor NPT-1/8 has widely applications, which is applicable to water, oil, and gas(no freezing).

Goulds Pump J5S Shallow Well Jet Pump, 115/230 volt, 1/2 hp

• Pumps are manufacturer tested and may contain water inside from such testing,.
• See all sketch images for more details, NEMA standard, 60 Hz, 1/2 HP, 115/230 V capacitor start, single phase, 3500 RPM.
• Built-in overload with automatic reset, stainless steel shaft, pressure regulator included..
• Rotation: Clockwise when viewed from motor end, UL778 listed.
• Pipe connections: 1. 25" Npt suction and 1" Npt discharge, pressure switch: as4 preset (30-50 PSI)..

Square D by Schneider Electric 9013FSG2J20 Air-Pump Pressure Switch, NEMA 1, 20-40 psi Pressure Setting, 20-65 psi Cut-Out, 15-30 psi Adjustable Differential

• Pressure switch with 20-40 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached.
• Switch works with a 1.5 hp or less pump, has an adjustable differential range of 15-30 psi, and has a cut-out range of 20-65 psi.
• NEMA 1 enclosure has a 1/4" NPSF internal fluid connection.

Goulds J5SH Residential Shallow Well Jet Pump 0.50 HP

• See all sketch images for more details, NEMA standard.
• 60 Hz, 1/2 HP, 115/230 V capacitor start, Single phase, 3500 RPM.
• Built-in overload with automatic reset, Stainless steel shaft, Pressure regulator included..
• Rotation: clockwise when viewed from motor end, UL778 listed.
• Pipe connections: 1.25" NPT suction and 1" NPT discharge, Pressure switch: AS4 preset (30-50 PSI)..
• Note : All Pumps, Are Tested By The Manufacture, Prior To Shipping. At Times You Will Encounter A Smalll Amount Of Water Residue Left Over From The Test..

Pass & Seymour H703PDBCCV4 15A Single Pole Decorative Switch

• Convenient operation -- combines ON/OFF Decorator switch with separate slider for dimming control..
• Constant memory returns lights to previous level after a power failure..
• Sleek, ergonomic P&S Decorator style matches other Decorator devices..
• Higher ratings. Single pole and 3-way operation. Works with standard 3-way switches and wiring..
• Screw-pressure-plate back wire terminals save time, space and money..