Best Oil Cooler Mounting Kit

Transmission Oil Cooler LPD47391 Low Pressure Drop Trans Cooler 40000 GVW OC-4739-1 LPD-4739-1 with Mounting Hardware (Silver)

  • Fitment:LPD47391 Advanced Cooling Protection for Car, Van, Light Truck, R.V. and Towing Applications.Suitable for applications up to 40,000lbs Gross Vehicle Weight.
  • High-Quality: Precise fin Spacing.Reliable, Durable Brazed Aluminum Construction..
  • Function:Self-regulating flow for maximum lube flow protection through cold start-up, varied temperatures and driving conditions, heavy loads and towing.
  • Package included: Transmission Oil Cooler,Bolts, nuts, washers, mounting straps, Brass fittings, high-quality cooler hose,hose clamps(No installation instructions).
  • NOTE: This kit is NOT intended for operation below 32 degrees Fahrenheit.
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

Seachoice Set of 2 Cooler Mounting Straps w/ Quick-Disconnect Hooks, for Use w/ Cooler Mounting Kit

  • Reliable straps keep cooler in a fixed location, preventing possible injury to boaters and damage to boat and cooler.
  • High-grade rubber straps feature durable fabric shell and corrosion-proof metal hooks.
  • Strong, reliable straps stretch to hook securely to mounting points and hold cooler in place.
  • Convenient quick-attach/quick-release hooks attached to the straps can be attached to and removed from cooler quickly and easily.
  • Designed for use with Seachoice Cooler Mounting Kit (76991.
Check Stock

Derale 15840 Hyper Dual-Cool Remote Cooler

  • Keep your transmission fluid cool with a 26,000 GVW transmission cooler kit and fan..
  • Small transmission cooler size: 11 1/4” X 18 1/2” X 3 3/4“..
  • Aftermarket cooler fan size: 11” diameter, 500 cfm, with 5.6 amp draw..
  • Trans cooler kit with a push or pull option for the fan depending on your needs..
  • Black powder coated oil cooling system for long life and good looks..
Check Stock

EVIL ENERGY 10 Row AN10 Oil Cooler Kit Universal 10AN Engine Transmission Aluminium Alloy Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 10Row oil cooler,Oil Capacity:0.24L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

EVIL ENERGY 15 Row AN10-10AN Oil Cooler Kit Universal Engine Transmission Aluminium Alloy Black

  • Universal: universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location: choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function: keep low oil temperature, help to improve the lubricating effect of engine oil, prevent parts damage and prolong engine life.This stacked-plate oil cooler can be used to cool down engine,transmission, and rear-differentials..
  • Size: 10AN 15Row oil cooler,Oil Capacity:0.8L.Test Pressure: 116psi,Burst Pressure:232psi.Material:aluminium alloy..
  • Please measure before purchase.EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message..
Check Stock

Racing Power Company R9729 Orange Drag Race Oil Pan for Big Block Chevy

  • Brand New Weiand Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1986-2002 Small Block Chevy Drag Racing Engines (Holley Part #5003WND).
  • Fits: 1986-2002 Small Block Chevy Drag Racing Engines | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly | Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit.
  • Specs: Application: 1986-2002 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Passenger | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.125" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

Diesel Coolant Filtration System Filter Kit Compatible With 2003-2007 Ford Powerstroke 6.0L - Prevent Leaks Heavy Duty Improved Single Piece Hose Design

  • ...nt while minimizing the number of containments to increase engine lifespan..
  • INCREASE ENGINE LIFE: It is commonly known that Ford 6.0L engines have extra solid particles left over from casting the engine which can clog your trucks factory oil cooler, EGR cooler, and other critical engine components..
  • MADE TO FIT: The mounting bracket mounts a precision CNC-machined 6061 aluminum filter mount and coolant filter to the passenger side radiator support area, an ideal location for easily removing the filter. This 6.0L coolant filtration system is routed in parallel with the flow path of your coolant system and allows a small amount of coolant to be filtered with each pass..
  • EASY INSTALLATION: If you are in the process of bulletproofing your 6.0L ,this Coolant Hose Kit will pair perfectly with the 6.0L coolant filter kit! This coolant filter kit installs in under 45 minutes with modifications necessary..
  • IMPROVED DESIGN: We included two brass ball valves with this kit to help make changing the filters a clean process. The two silicone coolant hoses have been designed as once piece hoses to reduce any possibility of leaks..
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock