Best Oil Water Separator

OTOHANS AUTOMOTIVE Outboard Fuel Pump with Gasket for Johnson Evinrude 438556 433387 20-140 hp 48/90/115 18-7352

  • Fuel Pump Compatible with Johnson Evinrude 20hp 25hp 28hp 30hp 33hp 35hp 40hp 45hp 48hp 50hp 55hp 60hp 85hp 88hp 90hp 100hp 112hp 115hp 140hp Replace....
  • A top quality oil pump separator. This oil pump separator may not be the cheapest around, but it is well made, high flow and will handle fluids that....
  • Suitable for virtually all fluids, this will handle kerosene, oils, water etc..
  • Hole Distance: 40mm/1.57inch,Hole Diameter: 5.5mm/0.22inch,Package include: 1 x Fuel Pumpp, 1 x Gasket.
  • Aluminum alloy low pressure casting, high density, not easy to leak oil.
Check Stock

Koehler Enterprises KE001 Hose Clamp Emergency Kit, 6 Piece

  • [Package Contents]:The 10AN hose separator 5pcs with allen wrench 1pc,please ensure the sies of the hose separator clamp match the OD of your hose.
  • [Quality Material]:The hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.Metal Suits -10AN SS braided hose secure tight with hex allen head bolt.more easy for you to install them..
  • [ Compatibility and Reusable ]:Our guarantee that this product is not disposable, and you can easily reuse them. You can use them for Fit for 5/8 Fuel Line, Oil Line, Brake Line, Water Pipe and Gas Line and so on.
  • [Convenient and tidy]:The hose line separator clamps are used to improve the tightness between multiple pipes and make the hoses more organized and tidy, especially in cars or other small spaces.
  • [Tip]:Our hose separator clamp suit,usually used forwater Hose pipe Gas,Line,Fuel Line and other purposes,Please check the size and pictures carefully before buying,If you have any questions, Please contact us, We will be happy to provide you with the best service..
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 50 CFM GOOD FOR 10HP & 15HP COMPRESSORS WITH PRE-FILTERS

  • NEW 50 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 50 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

VEVOR PCP Air Compressor, 4500PSI Portable PCP Compressor, 12V DC 110V/220V AC PCP Airgun Compressor Auto-stop, w/Built-in Adapter, Fan Cooling, Suitable for Paintball, Air Rifle, Mini Diving Bottle

  • ... Adapter & Fan: This PCP airgun compressor is cooled by a built-in fan, no need for external water or oil, and the power converter is also built-in, easy to operate. The cooling fan is controlled manually.
  • please shut off the compressor and keep the cooling fun running when the temperature reaches 70 ℃..
  • Oil/Water Separator: Our PCP air gun compressor adopts a built-in oil/water separator--- an activated carbon separator on the hose, enabling you to use it repeatedly. It can efficiently filter oil and water in the air and output clean and dry high-pressure air. The inflation nozzle is an 8 mm quick connector, which can be fast connected and disconnected..
  • Wide Application: Adjustable pressure gauge, bleed valve, burst disc, and fuse make the paintball compressor more secure. With a portable handgrip design, it is easy for you to carry and storage. Suitable for PCP air rifle, paintball tank, air pistol, PCP air gun, mini diving bottle, etc..
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR, COMPRESSED AIR SYSTEMS, 75 CFM, GOOD FOR 15HP & 20HP COMPRESSORS (STAND ALONE DRYER)

  • NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER 115V, SINGLE PHASE.
  • PLEASE NOTE:: YOU MUST USE A MINIMUM 1 MICRON FILTER / WATER SEPARATOR BEFORE REFRIGERATED AIR DRYERS.
  • ITS VITAL THAT WATER & OIL ARE REMOVED FROM THE PIPING BEFORE HITTING THE DRYER. PLEASE SELECt OPTION " WITH PRE-FILTER" FOR A COMPLETE KIT THAT INCLUDES THE DRYER, PLUS STAGE 1 WATER SEPARATOR FILTER + STAGE 2 COALESCING FILTER FOR OIL. IF YOU NEED FILTER AND AIR PRESSURE REGULATOR, PLEASE SELECT "WITH REGULATOR PRE-FILTER" FROM THE ABOVE LINK..
  • 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / REFRIGERANT FLUID TYPE: R134a / WIRE SIZE REQUIRED: 10 GAUGE / DEW POINT: 41 DEGREES FAHRENHEIT AT 100 PSI.
  • 220 PSI MAX INLET / DIMENSIONS IN INCHES: ( HEIGHT 29.25" ) ( WIDTH 13.9" ) (LENGTH/DEPTH 16.9") / 75 LBS.
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 75 CFM GOOD FOR 15HP & 20HP COMPRESSORS WITH PRE-FILTERS

  • NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN) 11oz METAL BOWL.
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES 99.98% REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH 11oz METAL BOWL AND INTERNAL FLOAT DRAIN (AUTO DRAIN).
Check Stock

VEVOR PCP Air Compressor, Auto-stop Powered by DC 12V Car or Home AC 110V/220V, 4500Psi/30Mpa/300Bar w/Built-in Water/Oil Adapter & Cooling Fan for Paintball, Scuba, Air Rifle

  • ... Adapter & Fan: This PCP airgun compressor is cooled by a built-in fan, no need for external water or oil, and the power converter is also built-in, easy to operate. The cooling fan is controlled manually.
  • please shut off the compressor and keep the cooling fun running when the temperature reaches 70 ℃..
  • Oil/Water Separator: Our PCP air gun compressor adopts a built-in oil/water separator, an activated carbon separator on the hose, enabling you to use it repeatedly. It can efficiently filter oil and water in the air and output clean and dry high-pressure air. The inflation nozzle is an 8 mm quick connector, which can be fast connected and disconnected..
  • Wide Application: Adjustable pressure gauge, bleed valve, burst disc, and fuse make the paintball compressor more secure. With the wire spool and portable handgrip design, you don't need to worry about the wire winding, and it also is easy to take along and pack up. Suitable for PCP air rifle, paintball tank, air pistol, PCP air gun, mini diving bottle, etc..
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 20-25 CFM GOOD UP TO 5HP COMPRESSORS MAX WITH REGULATOR PRE-FILTER

  • NEW 20-25 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED AIR PRESSURE REGULATOR/WATER SEPARATOR FILTER + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 20 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: AIR PRESSURE REGULATOR ADJUSTS 7-175 PSI / WATER SEPARATOR FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Compressors with Pre-Filter

  • NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS. IF YOU NEED PRE-FILTER WITH REGULATOR, PLEASE SELECt " REGULATOR PRE-FILTER" OPTION ABOVE.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock