Best Offset Socket Tray

5 PCS Automotive Oxygen Sensor Socket Wrench Removal Tool and Thread Chaser Set (Blue Case)

Design Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots..
Package1-pc 3/8 Dr. extra deep broach socket (3-1/8 long), 1-pc 3/8 Dr. low-profile crowfoot socket wrench (1-1/4 long), 1-pc 1/2 Dr. offset crowfoot socket wrench (1-15/16 long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8 drive to clean and repair damaged threads.
USE Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!.
Material Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust..
Service100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Check Stock

STEEL CORE 30113 6Pc Socket Tray/Organizer Set, SAE/Metric

1Pc 1/4in socket tray: 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8 (inches).
1Pc 1/4in socket tray: 4, 45, 5, 55, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 (mm).
1Pc 3/8in socket tray: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 (inches)DescriptionThe STEEL CORE 6pc socket set tray/organizer set, SAE/metric is designed to keep your sockets organized and readily available. The heavy duty molded ABS plastic Trays features drive stubs for both shallow and deep sockets..

Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
Durable blow mold case for safe storage and tool retention.

Check Stock

WORKPRO Magnetic Socket Organizer Set, 6-Piece Socket Holder Set Includes 1/4", 3/8", 1/2" Drive Metric SAE Socket Trays, Holds 141 Pieces Standard Size and Deep Size Sockets(Socket not Included)

Large Capacity Magnetic Socket Organizer Set: These magnetic socket organizers can store up to 141 metric and SAE sockets and two drive adapters. The kit includes three blue metric magnetic socket organizers and three red SAE magnetic socket organizers for 1/4", 3/8", and 1/2" drives. Used to collect SAE and metric receptacles, but not for impact sockets. Tip: sockets are not included with the holders..
Magnetic Base: The magnetic base secures the sockets in their designated places. They won't fall out even if you turn the socket tray upside down. They also allow you to attach the tray to any steel surface..
No scratches Installation: The surface of the magnetic base is composed of soft rubber, so there is no need to worry about scratching the surface of your metal tools and sockets, perfect fit for your toolset..
Keep Your Sockets Organized: Find the right socket quickly and easily with this magnetic socket holder set. Each tray has a legible label, so you can tell which slot to grab. Instead of finding the socket you want in a disorganized toolbox like before..

Check Stock

Hedume Set of 6 Socket Organizer Trays, Socket Rails, Red SAE and Black Metric Socket Storage Trays, 1/4', 3/8' and 1/2' Drive Deep and Shadow Socket Holders, Holds 80 SAE & 90 Metric Sockets

Long-lasting Socket Storage - These lightweight toolbox organizers are made of a rugged ABS plastic that is strong enough to endure a lifetime of use.
Durable socket trays for tool boxes are designed with professionals in mind..
Tool Box Socket Organizer - Store and organize 1/4”, 3/8”, and 1/2” drive sockets.
These socket organization trays store a wide array of the most popular SAE and Metric mechanic sockets.
Sockets organizer stores shallow and deep-well sockets..
Organizer Workspace - Socket tray posts are clearly labeled with measurements for easy identification.
Never misplace another socket with this labeled socket organizer.
Our tool socket organizer cleans up cluttered tool boxes and workspaces..
Secure Hold - Every socket organizer tray features an extended base to keep sockets in place.
Each socket tray set is designed not to tip over, so sockets won’t come loose or dislodge.
Size Ranges - 1/8” to 5/8”, 4mm to 15mm (1/4" drive).
1/4” to 1”, 6mm to 20mm (3/8" drive).
3/8" to 1-1/4", 10mm to 27mm (1/2" drive)..

Check Stock

Precision Defined Portable Tool Socket Organizer Tray, 80 Sockets, 1/4-Inch x 20 Clips, 3/8-Inch x 30 Clips, 1/2-Inch x 30 Clips (Black)

✅ ESSENTIAL - Get the essential organization tool for any on-the-road mechanic, tradesman or automotive DIY specialist. These tool socket holders organize and protect your sockets from being a jumbled mess and getting lost in your garage. Your sockets will stay in place when opening and closing drawers, cabinets and tool chests. Versatile in a fitting to your work area, simply place them in your garage, tool chest or drawer, these tool socket organizers is the go-to essential holder for al.
✅ PORTABLE: Each heavy duty tool socket tray organizer has 80-piece sockets to fit all your SAE or Metric sockets in one place. Featuring 20 x ¼-inch clips, 30 x ⅜-inch clips and 20 x ½-inch clips, the tray is travel ready to take with you job-to-job. With spring loaded ball bearing socket clips, pop and snap your sockets in and out with ease..
✅ ORGANIZE AND DE-CLUTTER: No one likes searching for tool sockets in a messy workspace. You will lose them in your full array of tools. Simply use Precision Defined’s tool socket trays to clean your man cave! Each socket holder is customizable so you can fit the tray to your liking. Simply swap each size on a different rail on....

Check Stock

Tite Reach 3/8 Do-it-Yourself Extention Wrench Model

[Repair with Ease]: Depend on the ABN Wrench Extender Tool 3pc Socket Wrench Extension when repairing trucks, vans, cars, and more.
[For Your Tools]: Socket extension allows you to switch between 3 adapters to fit your socket or impact wrench (not included).
[Quality You Need]: No need to worry about this torque wrench bending and breaking at the seams.
Offset extension wrench is constructed of heavy-duty....
[Easy to Use]: Torque wrench allows you to fit into awkward and hard-to-reach areas under the hood without strain or stress.
[Heavy-Duty Size]: Socket set extender measures 15 inches (39cm) to provide maximum stability as you work on your cars and trucks.

Check Stock

Schluter Kerdi 38 Inch x 60 Inch Offset Shower Kit with 2 Inch ABS Flange, Stainless Steel Grate and Joint Sealant

SHOWER TRAY: the pre sloped shower tray KST965/1525S (38 Inch x 60 Inch Offset) is machine fabricated to ensure proper water drainage.
KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed..
WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi strainer (KD-STR) and Wedi Joint sealant tube (10.5 oz).
EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high density polymer. The material is lightweight and trimmable to achieve the desired shower base size..
WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the manual..

Check Stock

6PCS Socket Organizer Tray Set, Red SAE & Black Metric Socket Storage Trays, 1/4-Inch, 3/8-Inch & 1/2-Inch Drive Deep and Shadow Socket Holders for Toolboxes

ELIMINATE TOOLBOX CLUTTER & SAVE TIME – This complete socket trays set is designed for eliminating your toolbox cutter and keeping it organized. Make it convenient for you to find the dedicated socket instantly.
TOOL BOX SOCKET ORGANIZER: Store and organize 1/4”, 3/8”, and 1/2” drive sockets.
These socket organization trays store a wide array of the most popular SAE and Metric mechanic sockets.
Sockets organizer stores shallow and deep-well sockets.
LONG-LASTING SOCKET STORAGE: This lightweight socket organizer for toolboxes is made of a rugged ABS plastic that is strong enough to endure a lifetime of use.
Durable socket organizer tray for toolbox storage is designed with professionals in mind.
ORGANIZED WORKSPACE: Toolbox organizer tray posts are clearly labeled with measurements for easy identification.
Never misplace another socket with this labeled socket organizer.
Our plastic socket holder cleans up cluttered tool boxes and workspaces.
COMPREHENSIVE SAE AND METRIC SOCKET HOLDER SET: 1/8” - 5/8”, 4mm - 15mm (1/4" drive socket organizers).
1/4” - 1”, 6mm - 20mm (3/8 socket organizer).

Check Stock