Best Nylon Insert Hex Screws

iexcell 300 Pcs SAE 1/4-20 UNC Stainless Steel 304 Hex Socket Button Head Cap Screws Bolts Washers Nylon Inserted Self-Locked Hex Lock Nuts Assortment Kit

✔ Includes 100 Pcs, 10 Sizes, Hex Socket Button Head Cap Screws: 1/4-20 x 3/8, 1/4-20 x 1/2, 1/4-20 x 5/8, 1/4-20 x 3/4,1/4-20 x 7/8, 1/4-20 x 1, 1/4-20 x 1-1/4, 1/4-20 x 1-1/2, 1/4-20 x 1-5/8, 1/4-20 x 2.
Screw Head Style : Button, Screw Drive Style: Internal Hex drives, Known as Hex Socket Drives, Hex Size: 5/32", Head Diameter : 7/16", Head Height : 1/8", Thread Pitch : 20 TPI, Thread Dia. : 1/4".
✔ Includes 100 Pcs, 1/4-20 ANSI/ASME B18.16.6 Self-Locked Hex Lock Nuts, Nylon Inserted, Self Locking, Loose Unexpected Will NOT Occur.
✔ Includes 100 Pcs Φ1/4 Inches Washers: Add More Touch Area to Meet Special Condition In Some Cases and Protect Parts from Being Damaged.
✔ Includes 1 Pcs Hex Key, Hex Size: 5/32", to Drive These Screws Conveniently and Easily..
✔ Material of Screws, Nuts and Washers: Stainless Steel 304, High Strength and Anti-corrosion in Various Environments ✔ Material of hex key: chrome-vanadium steel, nickel plated✔ Package: All These Screws, Nuts, Washers and Hex Key Packed In a Sturdy Easy-use Plastic Storage Case, Organized Conveniently and Easily.

High Quality Metric M8 white PA66-Nylon Phillips Pan Head Machine Screws Hex Nut with Flat Washer Assortment Kit.
Screws and Nuts Thread: M8/(8mm) with Thread pitch:1.25mm.
Screws are Fully Threaded(measured from under the head).
The assortment contains:M8x10mm(10PCS),M8x15mm(10PCS),M8x20mm(10PCS),M8x25mm(10PCS),M8x30mm(10PCS),M8x35mm(10PCS),M8x40mm(10PCS),Matching M8 Hex Nut (30PCS),M8 Flat Washer(50PCS).
All products are made of durable nylon,advantages of nylon over metallic include electrical insulator properties and moisture,friction,and chemical resistance.
Type specification complete,the quality is reliable,Easy to install and durable to use.

... on both sides for optimum structural support.
This Black and Chrome Receiver Hitch for Touring Models remains hidden when ball mount is not installed and is the most simplistic bolt-on installation using simple hand tools.
Includes (1) Left Side Strut Hardware Kit - CONTINUED: (1) Right Side Strut, (3) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
Will not fit with accessory Saddlebag Guard R....

Package: 25 PCS 1/4"-20 Nylon Insert Hex Stainless Locknuts.
Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..

REPLACEMENT: replace those striped out tork bolts with Stainless Steel HEX BHCS (7).
HEX WRENCH: included so you can change them out easily with a more sure grip..
NO SPECIAL WRENCH: if you loose the hex wrench you can get then fairly easy. Torx wrenches and not as easily found everywhere..
STAINLESS STEEL: Hex Button Head Screws and Washers.
BATWING WINDSHIELD FAIRING: Brass Insert Repair Kit-Listing number 0114OGN82NX.

Package: 25 PCS 3/8-16 Nylon Insert Hex Stainless Locknuts (Specification described in the pictures).
Width From Flat to Flat: 0.551 inch to 0.564 inch.
Overall Height: 0.438 inch to 0.468 inch.
High Quality Material: Made of Stainless Steel 304 (18-8) which provides good strength and corrosion resistance in bad environments without the need for time consuming and costly maintenance..
Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..

Package: 50 PCS #10-24 Nylon Insert Hex Stainless Locknuts.
Overall Height: 0.157 inch to 0.187 inch.
Made of 304 stainless steel (no coating outside) 18-8 which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Will NOT COME LOOSE: With a nylon insert inside, the lock nuts greatly reduce loosening under vibrations and torque..

40pieces Pack of Furniture Screws Threaded Inserts for Wood Furniture..
Size: Internal Thread Insert Type: 1/4"-20, External Diameter: 10.5mm, Total Length: 15mm. (1/4"-20x15mm).
Material: High quality carbon steel with high hardness. These furniture screws are wear-resistant and very durable to use. Standard internal hex socket type without burr and non-slip design..
Usage: Pre-drill /drill a well-sized hole (Suggest that the diameter of the hole is 9.6 +/- 0.2mm, the length is about 18mm), then use a 6mm internal hex tool to screw in (6mm Hex Spanner Included). Tip: If the furniture wood is with high-hardness, please enlarge the screw hole..
Applications:These furniture screws are suitable for furniture hardwood/ solid wood, for furniture combinations..

Everything you need, just supply own poles, electric drill, wire cutters and rivet gun. If you are fixing to masonry/brick walls a masonry drill bit and nylon plugs will be required.
Adorn fences & walls with climbing greenery.
Heavy duty wire 316 stainless steel - high tension / heavy loading. Unique tensioning system allows re-tensioning if wire becomes slack.
Number of Components: Anchors in capsules: 4 Anchor Platforms: 4 Hex head screws: (25mm) 8 Radial Wire Guides: 10 Hex Screws (40mm): 20 Tension Cap: 2 End Cap: 2 Wire in m (spooled) : 30m of 2mm '316' wire.