Best Non metallic Tubing

HydroMaxx Flexible PVC Non Metallic UL Liquid Tight Electrical Conduit (1\ Dia x 25 ft)

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Woods Southwire 55094222 Liqua Flex 1/2-Inch by 50-Feet Non-Metallic Liquidtight Flexible Conduit

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

Citrus II CPAP Concentrated Cleaner 32-Fluid Ounce

  • Cleans and deodorizes CPAP hoses, tubing, and accessories.
  • Vegetable-derived cleansers and solvents remove dirt and oils from masks and accessories.
  • Contains no alcohol, bleach, or moisturizers that may reduce the life of equipment.
  • Non-yellowing, will not deteriorate life of mask, tubing, accessories.
Check Stock

Woods 55082122 AL Flex Fo5000050M Type Rwa Reduced Wall Flexible Conduit, 1/2 in X 50 Ft, Aluminum

  • Non Metallic Flexible Liquid Tight Conduit with 2 Free Straight and 2 Free Angle Fittings.
  • Conduit is Flexible - Can be used in extremely Tight Quarters, Light Weight - Lower Installed Costs.
  • Liquid Tight Conduit Resists Corrosion, Oil and Water, Smooth Inside for Easier Wire Pulling, Resists Crushing and Stretching,Outdoor Sunlight Resistant.
  • These Non-Metallic connectors are molded of Type Nylon 6, O Ring and Steel Lock-nut included, for Indoor and outdoor use.
  • No Threading of Conduit Required to Install, No Disassembly Required (Just Push Tubing onto Fitting).
Check Stock

THINBIT 3 Pack SPT045D5 'S' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within 1/16" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Check Stock

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • ...erforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of the hoses)..
  • British inch Size: Compared with other metric size metal clamps, our 1 inch worm clamps were engraved clear 5/8 to 1-1/16 inch on band for easy and fast identification when using..
  • All 304 SS: The housing, screws and band of our tubing clamps are all made of high quality 304 stainless steel. The neutral salt spray(NSS) test is 100 hours. Our SS 304 screws are plated for smooth tightening, enhancing corrosion protection level and meeting the marine grade hose clamps requirement but costing less than SS 316. These stainless clamp 1 inch, compatible with SAE J 1508 standards, are ideal for 3/4 silicone heater hose, garden sprinkler etc..
Check Stock

8 Pack 1 1/2 Inch Round Plastic Plug, Pipe Tubing End Cap, Glide Insert Furniture Finishing Plug for Round Metal Tube

  • ** Measure Carefully! ** PLUGS WILL NOT FIT 1 1/2″ OPENING ►APPLICABLE SIZE-These round tubing end caps fits 1-1/2″ OD round tubing (one inch OUTSIDE diameter) with INSIDE hole diameters (ID) from 1.32″ – 1.43″ and wall thickness of .031″ – .059″ Steel Pipe..
  • ►Perfect Fit For Indoor and Outdoor Use- These Round Plastic Tubing Plug serve as a long-lasting solution for many household or outdoor projects including replacements for metal tube, lighting stand cross bar, boat seat post holes, bakers rack, bunk bed ladde, iron loveseat, tubular shaped metal legs, pre-runner bumpers, wrought iron patio chairs, wrought iron glider swing, wooden slat lawn chair, dining room chairs, chair legs, bar stool, kitchen chair, hollow leg chairs, or any round opening..
  • ►The premium plastic plug can supply a clean look, and they are gentle on floors causing no markings, work great for preventing scuffs on wood floor or as protection glides on chair tips, bar stool foot sliders, bench feet, table legs, patio furniture inserts, chair leg protectors, and much more. Strong plastic plugs and they glide nicely on a wood deck.
  • ►These round tubing caps made of Premium Quality Plastic, sturdy, Durable shockproof and waterproof....
Check Stock

THINBIT 3 Pack LGPT045D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .062" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock

THINBIT 3 Pack LGPT085D5 'L' Series, Uncoated Carbide, Parting Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Narrow widths reduce material loss and part deflection. Perfect for precious metals, thin wall tubing and small diameter parts. Cuts within .043" of collet face or shoulder of larger diameter..
  • Use for parting solid stock up to 1.000" or tubing with wall thickness up to .500"..
  • Uncoated DURA-MAX 5000 carbide parting insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
  • Use with Large series toolholders. Use any straight or 90 degree toolholder..
Check Stock