Best No sand Primer

TotalBoat-439901 TotalProtect Epoxy Barrier Coat System White Gallon

High-build two part epoxy primer and barrier coat for use above and below the waterline.
Excellent for gelcoat blister prevention and repair work on fiberglass boats.
Provides superior protection on all underwater metals.
Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat..
Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200..

1000 grit Wetordry for sanding primer and scuffing the blend area prior to painting.
Using the product wet limits dust in the air.
For use with a 3M Sanding Block to produce a uniform finish.
The 800 grit sandpaper is the most flexible backing with more consistant scratch pattern make this 3M’s best wet sanding product.
3M Wetordry Papers provide excellent flexibility for finishing and polishing plastics, metal and coatings..
3M Imperial Wetordry sheets are used in wet and dry sanding applications such as scuffing paint, fine featheredging of auto body primer and paint or the final sanding step before priming auto body panels..
3M Imperial Wetordry offers a flexible backing and a more consistent scratch pattern for fine auto body finiishes..

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

5Pk Grey Detail Sander + 5pk Red Maroon Scotch Brite pads, Scouring Pads, 3M Sandpaper Equivalent.
Load resistant, Performs like steel wool grade 00 without splintering, Ultra fine consistent finish.
Excellent general purpose sanding pads for prepping, final finishing and light cleaning, automotive primer, for final sanding of primer-surfacer, does not rust like steel wool.
Scotch Brite sponges may be used by hand sander, orbital sander, lathe tools and as boat accessories or auto body tools.
Aluminum Oxide, Made of nylon web,Designed for scuffing before applying paint and primer-surfacer like automotive sandpaper.

Box of 20– (400Grit,600Grit,800Grit,1000Grit,2100Grit) LONG-BOARD PSA Premium Sanding Sheets – Made with Fused Zirconia Alumina Corundum for a sharp cut and uniform finish..
ANSAI sanding Sticky back glue sandpaper are precut to standard File Boards at 0.78" x 3.14" and are conveniently packed 20 to a box..
Ideal for: Shaping Body Filler, Removing Paint, Rough Feather Edging, Primer/Metal Sanding It delivers a fast, exceptionally long lasting cut with a consistent scratch pattern for Auto Body and painting, wood working, metal working, Fiberglass, Primers and Plastics ideal for: Shaping Body Filler, Removing Paint, Rough Feather Edging, Primer/Metal Sanding, Hobby working..etc...
Provides Exceptional Sanding Performance, so you can get the job done fast, saving you time and money..

High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with....
Provides superior corrosion protection on all underwater metals.
Fast drying, with no sanding needed between coats.
Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200.

ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
apply a second coat only if a higher build is needed.
to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
boat primer is chromate-free and lead-free.
DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
do not apply Topside Primer thicker than recommended or it may not cure properly.

✅ POR-15 HIGH BUILD PRIMER - Provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products. Single component formula that fills in minor Imperfections and adheres well to steel, aluminum, stainless steel, brass, and other primed and painted surfaces..
✅ INTERLOCKING PRIMER - Formulated with special adhesion characteristics that make POR-15 High Build Primer perfect for most painted surfaces especially POR-15 Rust Preventive Coating. Our High Build Primer Provides sandable and buildable coating that can be applied over cured POR-15 Rust Preventive Coating and all POR-15 topcoats to enable quick refinishing and recoating of these products..
✅ APPLICATION - For maximum adhesion sand surfaces to be painted with 320 grit sandpaper. Clean painted and bare metal surfaces with POR-15 Cleaner Degreaser. Bare metal surfaces should be treated with POR-15 Metal Prep for maximum adhesion. Spray or brush on one or two covering coats of POR-15 High Build Primer and allow 10 to 15 minutes between coats. POR-15 High Build Primer can be topcoated after 24 hours of cure..
✅ WHEN DO I NEED THIS? - POR-15 High Build Primer is highly resistant t....