Best No Voltage Output

Valefod 6 Pack LM2596 DC to DC High Efficiency Voltage Regulator 3.0-40V to 1.5-35V Buck Converter DIY Power Supply Step-Down Module

【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state....
【Input Voltage】DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
【Output Voltage】DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
【Mini Size】45 * 23 * 14 mm (with potentiometer). 6pcs included..
【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue....

Check Stock

5 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module

Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost).
Output: DC 1.5 V to 35 V voltage is continuously adjustable, maximum output current is 3 A.
Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage (The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).
Features: all use SANYO solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output.

Check Stock

Dorhea 7PCS LM2596 DC to DC Buck Converter Voltage Regulator 3.0-40V to 1.5-35V Buck Converter DIY Adjustable Power Supply Step Down Module

The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can....
DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
The LM2596 buck module input and output interface can not be reversed. The input voltage must be higher than the output voltage..
Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed....

Check Stock

CBI Tools New Cable and Wire Grip 2000lb Capacity - Cable Size 3/32"-5/8"

【Volt Adjustment】 Input Voltage can be 110V or 220V. Wide adjustable output Voltage range: DC 0-48V. This supply is suitable for 5V 9V 12V 24V 30V 36V 48V devices. The voltage precision is 0.1V. Note——The maximum current is 10A. But the actual current is depended on the load. No matter how many voltage is adjusted, the current is 10A and can not be regulated. It can be used to device of 2A 3A 5A 10A. Make sure to use the devices which is below 10A..
【Hareware】 This Buck Converter is equipped with LED screen, heat sink and cooling fan. The LED screen can clearly display the output voltage. Heat sink and cooling fan can control the temperature in a safe range. During the running power is high, the cooling fan will automatically activate with little noise..
【Easy Operation】 This supply is no need to install, after connecting wire, it can be used to adjust output, which is convenient. The potentiometer is inset into the supply. Only to rotate the potentiometer can adjust output parameter..
【Protection】 Over Load Protection, Over Voltage Protection, Short Circuit Protection, which can protect your device from....

Check Stock

Ampeak 1200W Pure Sine Wave Power Inverter and AC Power Inverter Remote On/Off Switch

【Anti-spark Protection】: Built-in CPU control starts to prevent sparks to protect your safety, and to avoid damage to the battery connectors. Use Ampeak 1200watts pure sine wave inverter with safety, no scaring..
【Digital LCD Display masters the power inverter working status】: Can show you Input voltage, Output voltage, Output Watts, Output Current, Internal temperature, Battery status, Battery status percentage, Output frequency, and indicate protection in time..
【17 Safe Protections】: Ampeak 1200Watts pure sine wave inverter is the safest. Advanced pure sine wave best technology provides 17 safe protections: Anti-spark,Busover Voltage, Buslow voltage, Vcclow Voltage, Reverse Polarity, Batover Voltage, Batlow voltage Over current,Overload ,Invter overcool,Invter overheat,Invover Voltage,Invlow Voltage,Commwarn,Front Overcool, Front Overheat Short Circuit, fully protects and extends the life of your electronics and appliances..
【Independent Remote Control】: Flush mountable design making for clean and simple installation, Features a soft switch allowing you to turn on or off the LED indicator light..
【Remote Advanced Intelligence】: Turns inverter on and off from up to 20 feet away, Includes RJ11 long phone cord for remote hookup..

Check Stock

1200W High Power DC to DC Boost Converter, PEMENOL DC 10-36V to 12-80V Boost Module Step-up Transformer, Adjustable Charging Power Supply for Electric Vehicles and Solar Power

★High Power DC to DC Boost Converter: This module with a function of constant voltage and constant current. It can be used to provide charge for electronic devices. Suitable for voltage stabilization of solar panels, charging of batteries, lithium batteries, etc.
★Wide Input Voltage and Output Voltage: Input voltage: 10-36V.
output voltage:12-80V. The output current can be adjusted(Max 20A). ultra-low input and output voltage difference. When the current > 18A, please strengthen the heat dissipation.
★With Overcurrent and Short Circuit Protection : Double short-circuit protection (input 20A fuse).
with output anti-reverse flood protection, no need to add anti-reverse diode when charging.Note: There is no reverse connection protection, if you have this need, please connect a diode in series with the input.
★Large Heat Sink: Large heat sink design (85mm*62mm*64mm), and it has been processed with black oxidation (black oxidation has better heat dissipation). Which can prolong the service life of the module and make the conversion efficiency of the module higher.
★Widely Application: High-power LED constant current drive, Lithium battery charging, Ni-Cd or Ni-MH battery charging, Solar panels, Wind Turbines, and so on.

Check Stock

DCDC Converter, DROK Step Down Voltage Regulator Module DC 4.5-40V 36V 24V to 1.25-37V 12V 9V 5V 3V Variable Buck Converter Adjustable Electronic Power Supply Volt Reduce Transformer Stabilizer Board

DROK DCDC converter input voltage range is DC 4.5-40v, output voltage range is DC 1.25-37v, the voltage is continuously adjustable. It is a non-isolated buck converter, can dial down voltage from 36v 30v 24v to 12v 5v 3.7v 3.5v 3.3v 2v..
Analog Control: Our DC buck converter is designed with a adjustable potentiometer, the output voltage can be easily and accurately adjusted with a mini screwdriver. Clockwise to step up voltage and counterclockwise to step down voltage..
Protection: This power supply supply step down regulator is with over-temperature and short-circuit protection, which protect your device from damaging and enhance its safety when using..
Low Power-consumption: Although the voltage range is wide, this buck voltage module has a low power consumption of only about 3A when in static state..
Note: Please make sure the input voltage is at least 1.5V greater than output voltage to ensure stable output.
please note that there is no reversed connection protection, so check the polarity of input voltage before power on to avoid burning due to reversed connection.
please add heatsink when the output power is larger than 15W..

Check Stock

ATNSINC 4Pack LM2596 DC-DC Buck Converter, Adjustable Step Down Voltage Regulator 3-40V to 1.5-35V High Efficiency Power Supply Volt Reducer Transformer Module

The input voltage: DC 3 -40 V (Input voltage must be 1.5 V higher than the output voltage, no boost.).
The output voltage: DC 1.5 - 35 V adjustable..
The output current: It is recommended to use under 2A, maximum 3A(Additional heatsink is required)..
Steps: 1. Plugged into a power supply (3-40v), the power indicator light is lit, the module to work properly. 2. Adjust the blue potentiometer knob (generally booster clockwise, counterclockwise step-down) with a multimeter monitoring the output voltage to the voltage..
Package includes:4XLM2596 DC-DC buck converter module（Note：The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down).

Check Stock

Voltage Boost Converter, DROK DC 8-60V to 10-120V 15A Numerical Control Step Up Voltage Current Adjustable Regulator Constant Module Output 48V 24V 12V Power Supply with LED Display Heat Sink

Realtime LED Display & Indicators --- The transformer board is designed with bright 4-digit LED to display output voltage, current at default simple mode. By manual setting to fully functional mode, the stabilizer would show more parameters, such as power and capacity. Also the board is equipped with working indicators to show real-time working status..
Data Save --- The boost converter can save up to 10 sets of parameter settings. It’s easy to save and very convenient to call out parameters at any time you would like to..
Wide Application --- The step up power converter does great for wind power, DC generators, solar panels to charge battery, and it also can be made as a boost power supply to power devices..
Notes --- 1) No big difference between input and output voltage. Otherwise the power loss will increase then the actual output may not be as what expected.
2) Actual output current is mainly decided by the load. Converter can only set a limit on output current.
3) When powering high-power appliances, please turn off the automatic output function, correctly connect the converter, and then press the "OK" button to output. After the voltag....

Check Stock