Best Nissan Crankshaft

Cam Phaser Locking Tool and Crankshaft Positioning Tool Crankshaft Wrench Holder Fit for Ford 1993 4.2L/4.6L 2-valve,4.6L 4-valve 5.4L/6.8L V8 Similar to Rotunda 303-448,T93P-6303-A,6024&525219

  • FITMENT(Crankshaft Positioning Tool):1993 and newer 4.2L/4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines..
  • FITMENT(Cam Phaser Locking Tool):Expedition 5.4L 3V 2005-2011.
  • F-250/350/450/550 5.4L 3V 2005-2009.Mark LT 5.4L 3V 2006-2008.
  • Mountaineer 4.6L 3V 2006-2010.Mustang 4.6L 3V 2005-2010.
  • Navigator 5.4L 3V 2005-2012.Similar to Rotunda 303-448,6024,525219..
  • MATERIAL And DESIGN(Cam Phaser Locking Tool):Hardened chrome molybdenum steel,resistance on rust,deformation and crack.Designed with a triangle shape with four holes to perfectly fits for your cam phaser.It is a quite available accessory to make you do the phaser job with ease..
  • USAGE(Crankshaft Positioning Tool):This tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs..
  • CORRECT INSTALLATION POSITION(Crankshaft Positioning Tool):Easily installs over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center..
Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

  • 【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
  • 【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
  • 【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
  • 【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
  • 【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..
Check Stock

Engine Crankshaft - 4-Stroke Engine Crankshaft 110cc for ATVs Dirt Bikes Pocket Bikes Scooter Accessory Simple installation

  • Fits GM LS1, LS2, LS3, LS6, LS7, L92 To: Pre-1997 TH350, TH400, 700-R4, 4L60, 4L60E, 4L85E.
  • Package Includes: 1 x LS Crankshaft Spacer, 6 x Crankshaft Spacer Bolts..
  • Note : 1. WILL NOT FIT 4L80E transmission or 1999-2000 6.0 liter engine with long snout crankshaft.
  • 2. Required when used with automatic transmission built before 1997， Ensures Proper Clearance Between Crankshaft and Converte.
  • 1 Year Unlimited-mileage Quality Guarantee.
Check Stock

ACDelco Gold 710506 Crankshaft Front Oil Seal

  • Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX，ISX12 and ISX15 engine.
  • Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
  • Fit for the newest Cummins seal and sleeve perfectly.
  • Remove and install front crankshaft seal easily and without damage.
  • Made of high quality steel and black finish.
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

Crank Shaft Sleeve Adapter， 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8

  • ...cessed and rolled, which has greater strength, toughness and durability, strong wear resistance, not easy to rust and deform, reliable quality, and can be used stably for a long time. for 7/8 to 1 shaft adapter 7/8 to 1 inch shaft adapter with clutch.
  • STRONG COMPATIBILITY: Crankshaft sleeve adapters are equipped with different sizes of adapters, which have a wide range of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
  • PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
  • EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch shaft adapter 7/8 to 1 crankshaft adapter.
Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
  • A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
  • FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....
Check Stock

Crankshaft, 69mm, Forged Chromoly, 8 Dowel, VW Journals, Compatible with Dune Buggy

  • Complete crankshaft, Connecting rods, Wrist pin bearings, Main bearings and seals sold separately for single-cylinder crankshaft.
  • Fits: Ranger 570 Crew EPS Full-Size 2015, 570 Crew Full-Size 2015, 570 EPS Full-Size 2015, 570 Full-Size 2015-2018, 570-6 Crew 2016-2017, Crew 570-6 2018, RZR 570 2012..
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

4 Pack Speaker Wire Harness Adapter Replacement for Nissan Speaker Harness 2004-2021 Infiniti Speaker Harness 2006-2018 Car Speaker Connector Harness Adapter

  • 【Compatibility】Car Door Speaker Wiring Harness Adapter Replacement for Nissan speaker adapter, Nissan Murano 2003-2019,Nissan Frontier 2011-2019,Nissan Juke 2011-2019,Nissan Maxima 2004-2019,Nissan Pathfinder 2005-2019,Nissan Quest 2004-2017, Nissan Rogue 2008-2019,Nissan Cube 2009-2015,Nissan Sentra 2004-2018,Nissan Titan 2004-2019, Nissan Versa 2005-2019,Nissan 350Z 2003-2009, Nissan NV1500/2500/3500 2012-2018, Nissan Armada 2004-2015.
  • 【Compatibility】Speaker Wiring Harness Adapter Compatible with Nissan Xterra 2005-2015, Nissan Altima 2004-2019, Speaker Wiring Harness Adapter Compatible with Infiniti, Infiniti M35 2006-2010, Infiniti G35 2003-2015, Infiniti FX50 2009-2018, Infiniti EX35 2008-2012, Infiniti Q40 2007-2015, Infiniti FX37 2009-2018, Infiniti FX35 2003-2012, Infiniti FX45 2003-2008, Infiniti G37 2007-2015, Infiniti G25 2007-2015, Infiniti QX70 2009-2018.
  • 【OEM Perfect Fit & Easy to install】4 Pack speaker harness adapter for Nissan, 2 Pin infiniti speaker wire harness, Manufactured with factory quality nissan speaker wiring harness, no soldering or splicing, made your speaker upgrades really simple..
  • 【20 Year Warranty】Superior Nissan speaker harness is committed to better serving our clients through quality products,....
Check Stock