Best Nissan 3 3 Crank Pulley Removals

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

ARU Crank Pulley Tool Kit Screw Wrench Holder,Compatible with Subaru Imprezas 93-18 (EJ Engines only)

  • New V2 design has upgraded small pin reinforcement ring for loosening the toughest crank pulley bolts.
  • Integrated low profile handle allows you to easily remove your crank pulley with the radiator still in the car.
  • 2 sets of removable pins allows you to remove either style crank pulley found on applicable models.
  • Comparable and can be used in place of factory tools #499977000, 499977100, #499977300, and #499977400.
Check Stock

Auto Body Now ABN Harmonic Balancer Puller 46-Piece Tool Kit – Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set

  • [Effortlessly Remove Harmonic Balancers] Use the ABN 46 Piece Harmonic Balancer Puller Kit - Flywheel Puller, Crank shaft Pulley Puller, Steering Wheel Puller Set to apply even pressure to the hub so you can safely remove harmonic balances and other vehicle parts.
  • [Fits your Vehicle Needs] Steel yoke with 4 slots and 30 harmonic balance puller bolts allow you maximum versatility to handle a range of jobs on most cars, trucks, SUVs, and small engine vehicles.
  • [Various Bolt Sizes] 3/8-inch bolt in 1-1/2, 2, 4.5, and 6 inch lengths, 5/16-inch bolt in 3, 3.5, and 6-inch lengths, 1/4-inch bolt in 2.5-inch length, M8 x 1.25mm bolt in 45, 65, and 90mm lengths, and M10 x 1.5mm bolt in 35mm length.
  • Bolts come in a mixture of 16, 18, 24, and 28 thread pitch.
  • [Built to Last] Heat-treated carbon steel ensures maximum strength.
  • Chrome and black oxide finishes resist rust and corrosion.
  • Heavy-duty blow-molded carrying case provides easy transportation, safe storage, and quick organization.
  • [Package Contents] Crank pulley puller tool wheel balancer gear puller set include (1) 5 inch long 3/4-inch....
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SCITOO Alternator 13639 fit for Infiniti I30 1998-2000 for I35 2002-2004 For Nissan Maxima Murano 1995-2003 For Murano 2003-2007 AHI0104 IR/IF 110A

  • BENIFIT - Alternators with longer life,resist heat and moisture, protect alternators from excessive charging or failure due to shorts in your cars wiring that can cause spikes or open circuits.
  • REPLACEMENT - AHI0104 LR1110-710C LR1110-710F 400-44021 13826 23100-2Y900 ALT-3212 A204-4032R ALT-3212 1-2382-01HI.
  • COMPABILITY WITH - Alternator for Infiniti I30 1998-2000 V6 3.0L I35 2002-2004 V6 3.5L Nissan Maxima 1995-2000 V6 3.0L 2002-2003 V6 3.5L Murano 2003-2007 V6 3.5L.
  • SPECIFICATION - Part Type: UNIT, Voltage: 12, Rotation: CW, Amperage: 110, Pulley Class:S6, Regulator: IR.
  • Brief: For MAXIMA INFINITI I30 2000, 6-GROOVE PULLEY, 63mm OD.
  • CYCLING - New Alternator high Output are computer for voltage stability, terminal function, and circuit board integrity.
Check Stock

Ford Racing M-8600-M50BALT Alternator Kit for Ford Mustang Boss 302

  • BBK is your Number One Aftermarket Performance Brand in the USA - American Designed and Built.
  • Installing this BBK Performance Underdrive Pulley is one of the Easiest Ways to Gain Approximately 8-10 Horsepower.
  • Direct Replacement Pulley Kit Requires a New Shorter Length Serpentine Belt and Will Not Affect Cooling or Charging of the Vehicle.
  • Premium Quality CNC Machined Lightweight Crank Pulley Kit Adds Great Looks and Performance.
  • 1 Pc Kit Includes Crank Pulley Only, All Hardware and Instructions for Simple Installation.
Check Stock

Power Steering Pump W/Bracket & Chrome Pulley, Chrome Saginaw Style, Compatible with Chevy SBC

  • Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head..
  • A 3 groove crank pulley may be required for use with short water pumps.
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock