Best Network Configuration Automation

NETGEAR 8-Port Gigabit Smart Managed Plus Switch (GS308E) (Renewed)

  • ETHERNET PORT CONFIGURATION: 8 Gigabit ports.
  • CONFIGURATION & CONTROL: Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network.
  • SILENT OPERATION: The fanless design means Zero added noise wherever its located, making it ideal for noise-sensitive environments.
  • ENERGY EFFICIENT: designed to optimize power usage lowering its cost to operate, most models are compliant with IEEE802. 3az Energy Efficient Ethernet mode.
  • BUILT TO LAST: Every NETGEAR network switch is rigorously tested for reliability, quality, and performance..
Check Stock

GE Dimmer, Single Pole, Slide On/Off, White 52129

  • ...s. The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the dimmer. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device..
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Full-range dimmability for use with di....
Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

GE Enbrighten Add-On Switch for GE Z-Wave/GE Zigbee Smart Lighting Controls, Works with Alexa, Google Assistant, NOT A STANDALONE SWITCH, Toggle, 12728

  • WHY AN ADD-ON SWITCH – Add-on switches allow GE-branded in-wall smart controls to operate correctly in multi-switch configurations. By connecting directly to the smart device, the add-on mirrors its functions. This feature allows you to dim lights, adjust fan speeds, turn fixtures ON/OFF and more based on the capabilities of the primary smart device. While the add-on switch is not a stand-alone device, it provides continued use of your favorite smart-device functions from multiple locations..
  • ULTIMATE FLEXIBILITY – Compatible with any GE-branded smart control to operate lights or devices from multiple locations. The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch..
  • Requires a GE Home Automation Switch. This is NOT a standalone switch. (This product is an add-on only switch, and requires an existing GE Home Automation Switch to function. Without a GE Home Automation Switch, the Add-On Switch WILL NOT OPERATE.).
  • MULTI-SWITCH OPERATION – Easily replace any in-wall control in a multi-switch configura....
Check Stock

TP-Link Powerline Wi-Fi Extender TL-WPA7617KIT - AV1000 Powerline Ethernet Adapter with AC1200 Dual Band Wi-Fi Gigabit Port Passthrough OneMesh Ethernet Over Power Plug & Play

  • Homeplug AV2 Standard Compliant Powerline Adapter - Provides up to 1000Mbps Ethernet over power and up to dual band 1200mbps(300mbps 2.4Ghz plus....
  • One-Touch Wi-Fi Configuration - One press of the Wi-Fi button copies the network name and password from your router. Any setting changes will be....
  • Gigabit Ethernet Port - Provide secure wired network to desktop, smart TVs, or game consoles.
  • Plug, Pair and Play - Quickly set up a secured powerline network with no configuration required to enjoy fast, seamless wired/ wireless connection in....
  • OneMesh Compatible - Works with TP-Link OneMesh router to form a unified mesh network for seamless streaming while moving around your home.
Check Stock

monitor-io: Continuously Monitor Your Internet Service and IoT Connectivity - for Homes, Businesses, and Installers | Receive Service and Device Alerts | Remotely Diagnose Issues | No Monthly Fee

  • TROUBLESHOOT YOUR NETWORK: Review the history of outages and degradation. Troubleshoot and segment issues in your network, even when you lose internet connectivity. Get a visual status of your network connectivity from across the room..
  • SECURE AND EASY TO INSTALL: No special skills or router configuration needed. Just plug the device into your router and you are ready to go (after completing the registration). Following a strict do-no-harm presence on your network, there is absolutely NO ARP spoofing or ARP cache poisoning, NO interference with normal DHCP operation, NO changes to standard routing, NO inspection or processing of user data, and NO configuration changes to your router..
  • TRACK IoT DEVICE CONNECTIVITY: See when essential IoT devices are offline and when they are back online. See the pattern of online activity by device..
  • NOTIFICATIONS: Receive alert notifications for internet degradation, unknown devices joining your network, essential devices dropping off, etc..
  • CONTINUOUSLY MONITOR YOUR INTERNET CONNECTION: NOT based on speed tests or pings – uses advanced TCP and UDP testing to detect connectivity and performance issues in near real-time. Obtain information on connectivity interruptions, packet loss, delay variation and overall degr....
Check Stock

4G VPN Router, Industrial Dual Sim 4G LTE WiFi Router 3G/4G Yeacomm YF325 Wireless Modem Router Unlocked with Sim Card Slot, External Antenna Cellular Modem in North/South America, NOT for Verizon

  • ...IFI, Compatible with 802.11b/g/n, AP and Client Mode.
  • Yeacomm Dual SIM 4G Modem supports RS232 (or RS485/RS422), Ethernet port and WIFI that can conveniently and transparently connect one device to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
  • 4G Wireless Industrial Router working band, LTE FDD: B1/2/B3/B4/B5/B7/B8/B28.
  • HSPA+/HSUPA/HSDPA/WCDMA/UMTS 2100/1900/900/850MHz.
  • EDGE/GPRS/GSM 1900/1800/900/850MHz. Not compatible with Verizon and Sprint.
  • Yeacomm 4g lte sim router adopts high-powered industrial 32-bits CPU and embedded real time operating system. Widely used on machine to machine fields, such as self-service terminal industry, intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, etc.
  • Yeacomm YF325 4G Modem Good to use in North America and South America, Australia, New Zealand, Philippines, etc.Gift: 4 in 1 Converter Kit SIM Card Adapter with Steel Tray Eject Pin.
Check Stock

GE 14291 Enbrighten Z-Wave Plus Smart Light Switch, Works with Alexa, Google Assistant, SmartThings, Zwave Hub Required, Repeater/Range Extender, 3-Way Ready 1st Gen, White & Light Almond

  • ...ngs, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more..
  • HASSLE-FREE OPERATION – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device..
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond paddles (wall plate not included). Works with all LED, CFL,....
Check Stock

GE Enbrighten Z-Wave Plus Smart Toggle Light Switch, On/Off Control, in-Wall, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings Wink and Alexa, 14292

  • ...ings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more..
  • HASSLE-FREE OPERATION – Control the device remotely with your smartphone and voice commands when connected to a compatible hub or enjoy manual ON/OFF operation from the switch. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12728 or 46200. Up to four add-on switches can be connected to the same device..
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
  • EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices....
Check Stock