Best Nato Rail Handle

NICEYRIG Cage for Panasonic Lumix GH5/GH5 II/GH5S, Integrated with Camera Cable Lock Cold Shoe Mount - 191

[VERSION 2] Dedicated for Panasonic Lumix GH5/GH5MII/GH5S. SD card slot, battery compartment, and all camera controls are accessed with this cage..
[Cold Shoe Mount, NATO Rail And ARRI Locating Hole On The Top] Enable you to attach articulating arm, EVF mount, Rode Video microphone, monitor, etc..
[NATO Rail And Cable Lock Design On The Side] Two NATO Rails are on the left and right side to mount NATO quick release accessories, such as Niceyrig handle 268/187. Also, features HDMI cable lock on the left for firmly holding your cable in place.
Features strap hole to attach strap, which facilitates for handheld shooting. There are anti-skid pads on the bottom to keep the camera more stable..
Made of quality aluminum alloy, strong and durable.

Check Stock

Nitze Lil Stinger Handle Universal Mini Handle Grip with Built-in QR NATO Clamp - PA28M-AK

【Built-in QR NATO Clamp】Nitze mini top handle grip built-in QR NATO clamp on the bottom of the handle can be quickly attached and detached by the quick release lever..
【ARRI Locating Holes】ARRI locating holes on the front of the handle can be mounted with Nitze N54-F4 low profile monitor holder. The monitor holder mount supports 180° tilt and 360° swivel with free stop. Dynamic design, arbitrarily adjust the monitor angle which you want..
【Cold shoe Adapter】Mini camera top handle grip equipped with a cold shoe adapter which can be attached by two 1/4” screws. You can mount it in different locations on the handle for flexibility..
【Multiple Mounting Points】Nitze nato rail top handle PA28M-AK is filled with 1/4”-20 threaded holes and ARRI locating holes all around the handle for additional attachment options and DIY operations, and connect a variety of accessories for expansion..
【Ergonomic Design】All aluminum alloy material, Nitze nato clamp top handle is ergonomically designed to provide you with a more comfortable experience during long-time shooting. No slip, no sharp edges..

Check Stock

NICEYRIG Quick Release NATO Top Handle with 15mm Rod Clamp, Cold Shoe Mounts for DSLR Camera/ Camcorder/ Cinema Camera Cage

The nato handle is designed for quick release attaching and detaching on the camera. Simply slide onto NATO rail and tighten down the wingnut screw. Get your handle off without needing an Allen key every time..
You can twist the thumb screw off, adjust the handle 180 degree for camera and rigs balance or rotate the nato clamp to use this as a side handle..
The handle is equipped with two shoe mounts at both ends for attaching on camera lights, microphone shock mounts, etc. There are 1/4"and 3/8" mounting points for additional accessories attachment..
The 15mm rod clamp allows for attachment of EVF mount or microphone shock mount and so on. Made of aluminum alloy, lightweight and durable..
This cheese handle is compatible with small-sized camera cages and NATO Rails: compatible with A7/A7R/A7s/A7II/A7RII/A7SII, A6000/A6300/A6500 camera cages, applicable Panasonic G7, GH4, GH5, G85, compatible with Fujifilm X-T2 camera cages, etc..

Check Stock

SMALLRIG Camera Cage Kit Master Kit for Sony Alpha 7S III / A7S III / A7S3 with HDMI Cable Clamp NATO Rail NATO Top Handle - 3009

【MASTER KIT FOR SONY A7S】SmallRig Camera Cage Kit 3009 is especially designed for Sony Alpha 7S III A7S III A7S3. The kit includes an aluminum....
【FORMFITTING FULL CAGE】Made of premium aluminium alloy, the included cage is a solid piece of metal that is highly resistant to oxidation and....
【HDMI CABLE CLAMP】The HDMI clamp attaches to the side of the cage using a 1/4"-20 screw and two anti-twist pins, which prevents the camera's HDMI....
【NATO RAIL & NATO TOP HANDLE】The NATO rail attaches to the top of the cage using two 1/4"-20 screws, and the top handle quickly mounts on the....
【TOP RECOMMENDATION】When working with the camera field monitors, you could fix it to the top of cage kit 3009 with SMALLRIG Adjustable Monitor....

Check Stock

SMALLRIG Monitor Cage for Atomos Shogun Ninja Assassin - 1788

It’s only compatible for Atomos Shogun and Ninja Assassin (Shogun Inferno, Shogun Flame, Ninja Inferno, Ninja Flame, Shogun Studio and other monitors CAN NOT be used on this cage).
This device comes with arrays of 1/4″-20 & 3/8″-16 accessories mounting holes for extended functions.
A NATO rail on each end of the top for attaching NATO rail clamps.
anti-off device to prevent the SSD card from sliding.
equipped with a NATO rail on the bottom to attach NATO rigs.
Enable an access to mount the SmallRig sunhood for Atomos Shogun and Ninja Assassin Monitor.
Package includes: 1 * monitor cage, 1 * cable clamp, 2 * 1/4″-20 screws.

Check Stock

SMALLRIG Lightweight Top Plate for BMPCC 4K & 6K - APT2510

【FOR BMPCC 4K & 6K】SMALLRIG APT2510 is designed to mountarious accessories such as a monitor or top handle on your Blackmagic Design Pocket Cinema....
【ANTI-TWIST】The multifunctional top plate for BMPCC 4K & 6K firmly mounts to the camera using a 1/4”-20 screw and features an anti-twist....
【MOUNTING POINTS】The plate features a variety of mounting options including 1/4”-20 and 3/8”-16 holes, two locating holes for ARRI standard,....
【SINGLE 15MM ROD CLAMP】The included 15mm rod clamp is detachable and can mount on several selected places, so you can use a seperately available....
【BUILT IN NATO RAIL & COLD SHOE】The plate also includes a built-in NATO rail, two integrated shoe mounts for additional mounting options. An Allen....

Check Stock

SMALLRIG Articulating Magic Arm with Screw Ballhead and NATO Clamp Ballhead, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2071

▶ NATO Clamp Ballhead: Attach cage with NATO rail with on the other end via ballhead with NATO clamp, while it could attach monitor cage on the other end via ballhead with 1/4’’ screw.
▶ Quick Release & Adjust Angle: It features quick release and attachment and could be slid to get the balance of the whole kit.The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
▶ Precision locking device: A single wingnut is applied to lock the double ballhead tight directly, and thumb screws on both ends are utilized to lock the devices manually and a spared hex spanner is ready to lock it tighter.
▶ Extensive compatibility: The ballhead with 1/4″ screw thread can not only be connected to monitors, camera cages (such as gh5 cage rigs SMALLRIG 2049, SMALLRIG 2050, SMALLRIG 2051, SMALLRIG 2052), but also can be attached to monitor cages with NATO rail, such as Cage(5″) SMALLRIG 1726, SMALLRIG 2008,SMALLRIG Cage for Ninja Assassin 1788, SMALLRIG Monitor Cage 1834 or other products with nato rail.
▶ What You Get: 1 x Ballhead with 1/4’’ Screw.

Check Stock

[New Version] SMALLRIG BMPCC 4K & 6K Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K w/Cold Shoe, NATO Rail – 2203

...d 3/8’’ locating holes for ARRI standard, allow you to attach more accessories, like microphone or SmallRig Articulating Arm – 2070, etc.
【NATO RAIL】Features built-in nato rail that allows you to quickly release accessories with NATO clamp. Mounting SmallRig Side Handle - 2187 for hand-held shooting.
【FEATURED RECOMMENDATIONS】Compatible with Ronin S and Crane 2. For better setup, please search “SmallRig Mount for Samsung T5 SSD 2245”, “SmallRig lens adatper support for Metabones 2247” and “SmallRig HDMI cable clamp 2246”, which are exclusively designed for BMPCC 4K & 6K.

Check Stock

SMALLRIG Camera NATO Handle Top Handle Grip with Anti-Off Designed Cold Shoe Mount and Built-in Hex Spanner for DSLR Camera, Camera Cage - HTN2362

【QR NATO HANDLE】SmallRig Nato Handle grip is designed to provide a comfortable handheld use for accessory such as monitor, microphone, light and magic arm. It is compatible with SmallRig Camera Cage such as SmallRig2203, SmallRig2254, SmallRig1889.
【ROTATING 360° AND ANTI-OFF DESIGN】The quick release handle rotates up to 360 degree and secures to any cage with nato rail on the top or side. The twist handle is equipped with two cold shoes. One of them in front features an anti-off button to protect your setup from slipping off.
【BUILT-IN SPANNER】The top handle comes with an allen wrench on the side, which attaches via magnet inside the handle. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. So that makes it very easy to use for balancing the camera for handheld use.
【ACCESSORY THREADS】The handle features multiple 1/4"-20 and locating holes for ARRI for accessory attachment, such as SmallRig Monitor Mount BSE2294, BSE2346 and Ballhead 1135.
【COMFORTABLE GRIP】SmallRig HTN2362 integrates with natural rosewood without any painting, which could make it more comfortable to use and provide a comfortable handheld shooting for cameramen.

Check Stock