Best National Instruments Pci Card

PCI-E Riser Express Cable 16X to 1X with 4pin Power Graphics Extension Ethereum ETH BTC Mining Powered Riser Adapter Card+60cm USB 3.0 Cable (4P)

  • PCI-E riser 4Pin molex,gold plated contacts for better connectivity and long life,and with side clip to fasten other card. No driver needed,slot with a fixed buckle, easy to remove the card and fi,xed , so that the card will not fall off from the slot.The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment..
  • 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Wire is relatively soft, easy alignment, easy to install in the main box..
  • PCI-E with multi-layer shielded wire, the longest can be connected to 3 Meter and will not attenuate the signal.PCI-E plug all gold-plated, more wear and increase the conductivity.PCI-E riser 4pin,gold plated contacts for better connectivity and long life,and with side clip to fasten other card..
  • Transfer card with SATA 15PIN interface to enhance power supply, so that the card from the motherboard independent of the board, so as to reduce the burden on the motherboard to accept the card..
  • Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard,dedicated for bitcoin mining..
  • Note:If you have any questions,please contact us asap,and we will try our best to help you.
Check Stock

StarTech 1 Port PCI-Express Gigabit Network Server Adapter with Realtek Chip NIC Card - Dual Profile (ST1000SPEX2)

  • Add a 10/100/1000Mbps Ethernet port to any PC through a PCI Express slot.
Check Stock

BEYIMEI PCI-E 1X to 4 Ports PCI Express 1X Slots Riser Card,USB3.0 Converter Extender Adapter Card,M2 Expansion Card PCIe Port Multiplier Card for Ethereum Mining ETH

  • ⭐This riser card can expand the PCI-E 1X slot on the motherboard into 4 PCI-E 1X slots, thereby solving the problem of insufficient motherboard slots..
  • ⭐The 4PIN and SATA interfaces enhance the power supply capacity, thereby reducing the burden on the motherboard..
  • ⭐This adapter card is a hardware adapter, driver-free, plug and play..
  • ⭐It consists of two parts, one is the main card, which is installed on the motherboard through the PCI-E x1 interface, and the other is the device card, which has 4 PCI-E x1 and is connected through a customized USB 3.0 cable,for transfer between PCI-E and PCI-E..
  • ⭐The 4 expansion 1x slots are all in GEN2 mode, even if they were in gen1 mode before. It is a good choice for old motherboards..
Check Stock

EDUP Gigabit Ethernet PCI Express PCI-E Network Card 10/100/1000Mbps RJ45 LAN Adapter Converter for Desktop PC, Model Number: EDUP-EP-9602

  • Gigabit PCI network card suitable for any phi-enabled client, server or workstation, The Gigabit Ethernet network adapter card Supports high Performance Dual channel networking. And maximum data transfer speeds of 1000Mbps in each direction. Up to ten times faster than 10/100 Ethernet..
  • Network adapter card fits any PCI Express x1, x2, x4, x8 or x16 socket. You can add a 10/100/1000Mbps Ethernet port to any PC through a Pie slot. Additional 8cm low-profile bracket provides the option for installation in small size HTPC case. Important Note: only work with PCI-E slot, not for PCI slot..
  • PCI-E Gigabit Ethernet Network Controller Card Chipset is RTL8111F. Supports IEEE 802. 1p Layer 2 Priority Encoding and IEEE802. 1q VLAN tagging..
  • Gigabit network card fully compliant with IEEE 802. 3, IEEE 802. 3U, IEEE 802. 3x and IEEE 802. 3ab standards. Supports a broad range of operating systems, including Windows 10/8. 1/7/Vista/XP/2003/2000. (You can download driver From EDUP website.
  • Network card: If you are not satisfied with this network card, Please feel free to Contact us via email: message or 18033060667@163. We will offer you a full refund or new replacement..
Check Stock

Dual 2.5 Gigabit Ethernet PCI-E Network Expansion Card RJ45 LAN Adapter Low Profile Bracket SD-PEX24066

  • With this PCIe Card, you can add a 10/100/1000/25000 Mbps Ethernet port to any PC through a PCIe slot. Fits any PCI Express x1, x2, x4, x8 or x16 socket.
  • additional 8cm low-profile bracket provides the option for installation in small size HTPC case..
  • This pci-based 10/100/1000/25000 Dual 2. 5 Gigabit Ethernet network adapter card provides a simple connection to two 2. 5 Gigabit Ethernet network, and is fully compatible with 802. 1Q virtual LAN (VLAN) tag. And Ethernet card which Is compliant to IEEE802. 3, IEEE802. 3U & IEEE802. 3ab..
  • The high quality PCIe Dual 2. 5 Gigabit NIC with 12cm profile bracket and additional 8cm profile bracket that makes it easy to install the card in a small form Factor/Low profile computer case/server..
  • 2. 5 Gigabit network card Compatible with a broad range of operating systems, including Windows 10, 8/8. 1, 98SE, ME, 2000, XP, XP-64bit, Vista, Vista-64bit, 7, 7-64bit, Linux, 10. 7.
  • What you get: IO crest 2. 5 Gigabit PCI-E network card x1, driver Disk x1, 8cm low-profile bracket x1. Backed by Syba 3 year hassle-free and lifetime customer service. Important Note: only work with PCI-E slot, not for PCI slot..
Check Stock

Zerone PCI-E to USB 3.0 2 Port Express Card with 1 USB 3.0 20-pin Connector

  • USB 3.0 supports transfer rates of up to 5 Gbps..
  • Compatibility: This PCI-E to USB 3.0 2 port express card works for Windows XP 32/64/Windows 7 32/64/Windows8/Windows8.1/Windows10..
  • The USB 3.0 provides 5Gbps max data(total) transfer speed for video, audio, photos, or files data transmission..
  • This is PCI-E to USB 3.0 card, NOT PCI-E bridge card, please do not use it on GPU risers..
  • If you have any questions about this PCI-E to USB 3.0 2 port express card, please feel free to tell us, we will provide you with follow-up services..
Check Stock

DTECH 2 Port PCI-E Serial Card RS232 PCI Express Adapter COM Port Expansion for Desktop Computer PC Windows 10 8 7 XP Vista Linux Mac with 16C550 UART

  • 2-port PCI express serial card turns a PCI-E expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
  • Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98, Mac OS, Linux, etc.
  • PCI-E 1.0 a specification, Standard 16C550 UART signal.
  • PCI express combo card bracket with two RS232 serial interface uses WCH382 chip, high speed data communication transfer rate up to 250 Kbps.
  • Standard-height PCIe card bracket design allows the PCI to serial card to be installed in virtually any desktop computer case (full profile computer chassis).
  • An ideal serial expansion PCIe card adapter for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, hard drive, radio system, etc (If need driver installation guide , pls contact us directly via the order page.).
Check Stock

DTECH 2 Port PCI Serial Card PCI to COM Port DB9 RS232 Expansion Adapter for Desktop Computer PC Windows 10 8 7 XP Vista with 16C550 UART

  • 2-port PCI serial card turns a PCI expansion slot into 2 RS-232 DB9 serial port for your computer to connect multiple legacy serial devices.
  • Dual serial port card supports IRQ sharing and operates flawlessly with Windows 10, 8, 7, Vista, XP, 2000, ME, 98,etc.
  • PCI 2.1 specification, Standard 16C550 UART signal.
  • PCI card bracket with two RS232 serial interface uses WCH chip, data communication transfer rate up to 115.2 Kbps.
  • Full-height bracket design allows PCI to serial card to be installed in virtually any desktop computer case (standard profile computer chassis).
  • An ideal RS232 serial expansion card for fax modem, GSM modem, printer, barcode reader, cellular phone, PDA, POS machine, GPS, ISDN terminal adapter, satellite receiver, digital camera, radio system, etc. (If need driver installation guide , pls contact us directly via the order page.).
Check Stock

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock