Best Multi surface Primer

INSL-X Block Out Acrylic Exterior Wood Stain Blocking Primer, White, 1 Gallon

  • Multi-purpose latex exterior whole-house tannin stain blocking primer for new or weathered exterior wood..
  • Excellent exterior primer for masonry surfaces, like stucco or concrete block..
  • Low VOC, water thinned, blister and peel resistant, and high hiding.
  • Can be applied in low temperatures above 35 °F (1. 7 °C) but should not be used within 8 hours of air temperatures 35 °F (1. 7 °C) or lower.
  • 300 - 400 square foot coverage per gallon.
  • Do not apply to a hot surface or if rain is threatening.
  • Do not apply if temperature is within 5° of dew point.
Check Stock

KILZ Adhesion Primer, Interior/Exterior, 1 Gallon

  • A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches.
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
  • Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square f....
Check Stock

KILZ 3 Premium Primer, Interior/Exterior, 5 Gallon

  • PRIMER|SEALER|STAIN-BLOCKER: PRIMER KILZ 3 PREMIUM Primer is a heavy-duty high hiding primer, sealer and stain blocker. It seals porous surfaces, features an ultra white and thicker finish and blocks medium to heavy stains. It also has exceptional adhesion performance to help the topcoat adhere to most interior and exterior surfaces. KILZ 3 PREMIUM Primer is mildew resistant, has low odor and very low VOC and cleans-up easily with soap and water..
  • ADVANCED FORMULA: Advanced high performance acrylic polymer provides enhanced adhesion performance to a wide variety of interior and exterior surfaces.
  • greatly extending the longevity and beauty of the topcoat..
  • MULTIPLE SURFACES: Can be used for priming most interior and exterior surfaces including drywall, wood, brick, masonry, stucco, plaster, concrete, cinderblock, coated or primed metal, previously painted surfaces and properly prepared glossy surfaces. Works with oil, alkyd and water-based paints..
  • SUPERIOR COVERAGE: This 5-gallon pail of KILZ 3 PREMIUM covers approximately 1500-2000 square feet. Dries to touch in 30 minutes and can be recoated or topcoated after 1 hour..
Check Stock

KILZ Adhesion Primer, Interior/Exterior, 1 Quart

  • A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere..
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
  • Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings..
Check Stock

Oatey 30751 House Primers, 8 oz, Clear, 8 Fl Oz

  • Clear Primer, NSF listed (National Sanitation Foundation).
  • Clear aggressive primer used on PVC (polyvinyl chloride) and CPVC (chlorinated polyvinyl chloride) pipe and fittings.
  • Low VOC (volatile organic compound) solvent cement.
  • A clear aggressive primer for use on PVC and CPVC pipe and fittings.
  • Lo-V. O. C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
  • Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld.
  • Lo-V.O.C. Primer meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements.
Check Stock

TotalBoat 2-Part Marine Epoxy Primer Off White High Build Primer Quart

  • 2-Component epoxy primers provide maximum adhesion & improved durability for urethane topcoats on fiberglass, metal, and previously painted surfaces.....
  • The Surfacing Epoxy Primer formula is great for sealing faired substrates ready for topcoat application..
  • The High Build Epoxy Primer formula is ideal for covering pinholing and filling other minor surface defects..
  • Dries fast and is easy to sand. Overcoat with 1- and 2-part urethanes. For use above and below the waterline..
  • Choose primer type, size, and color: Surfacing Primer is available in Quart and Gallon size kits, in Gray and Off White.
Check Stock

Zinsser Rust-OLEUM 249933 1-2-3 Plus Quart, 32 Fl Oz (Pack of 1), White, 11

  • The product is manufactured in United States.
  • First water-based primer that blocks water stains..
  • Covers approximately 350 to 400 square feet per gallon depending on surface type..
Check Stock

VHT SP118 FlameProof Coating Flat White Primer Can - 11 oz. by VHT

  • XTC Silicone Zinc Primer prevents corrosion of metal surfaces exposed to high heat, high humidity, condensation and salt air.
  • XTC Silicone Zinc Primer functions much like galvanizing as it locks itself to bare metal surfaces leaving a perfect primed surface for top coating.
  • XTC Silicone Zinc Primer can be used alone as a finish paint.
  • XTC Primer withstands temps in excess of 1200 Degree F (648 Degree C).
  • XTC Silicone Zinc Primer is Gray in color.
Check Stock

Rust-Oleum Stops Rust Satin Black Oil-Based Protective Paint 1 qt. Exterior and Interior - Total Qty: 2

  • A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
  • KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches.
  • Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
  • Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
  • This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square f....
Check Stock