Best Mounts Stands

Outdoor TV Cover 55' - 58' - with Bottom Cover - 600D Water-Resistant and Dust-Resistant Material- Fits Your TV Better

  • UNIVERSAL COMPATABILITY – Works with practically all TV mounts/brackets on the market including low profile, fixed, tilting, full motion/swivel single-arm wall mounts, double-arm mounts, ceiling mounts and rolling TV stands.
  • FITS FLAT SCREEN TV’s AND DISPLAYS – Measuring 54 x 35 x 4 inches. Please check your TV measurement to ensure compatibility. Our TV Cover is designed with features to speed installation, which also has a cover for your remote control.
  • DURABLE 600D MATERIAL-Szblnsm TV cover is made of strong 600D Oxford cloth material. Compared with other non-600D materials, 600D is thicker, has a longer life and better waterproof performance.
  • 100% COVERED – Double stitched edges to ensure maximum strength, provides the best protection for your outdoor television. Soft liner prevents TV screen from scraping. Openings are with Velcro straps that are very durable compared to zippers.
  • SATISFACTORY SERVICE – To ensure your shopping experience, if for any reason you don’t like this outdoor TV cover, we will provide you with an unconditional refund or exchange.
Check Stock

Audio-Technica AT8458A Shock Mount for 20 Series Large Diaphragm Studio Microphones

  • Attenuates noise, shock and vibration transmitted through mic stands, booms and mounts.
  • Compatible with 3/8"-16 and 5/8"-27 threaded stands.
  • Designed to be used with the following Audio-Technica models: AT2020, AT2020USB (discontinued), AT2020USB+, AT2035, AT2050, AT3035 (discontinued), AT3060 (discontinued).
  • Also Fits Audio-Technica Case Style(s) R5, R7.
Check Stock

Mic Stand Extension Tube 4 Pieces 5/8 Inch Microphone Extension Pipe Aluminium Alloy Stand Extenders Screw Boom Tubes Microphone Extension Rod with 2 Metal Adapters for Desk Stand Arm Stand, Black

  • Make Your Microphone Closer: the microphone boom extension and mic stand adapter can connect together to extend the length of your microphone arm or the height of your mic stand, bringing your microphone close to you and your instruments, thus you can get a better recording effect.
  • Proper Size to Extend Mounts: each mic stand extension tube measures approx. 3.35 inches in total length, with a 5/8 inch male thread and a 5/8 inch female thread, and the adapters come with 5/8 inch male threads and 3/8 inch female thread, suitable for you to attach to your stands and mounts.
  • Work with Most Stands: the microphone extension pole can fit most microphone stands, boom arms and most microphones well, allowing you to record your performance better, and they can also work well with your devices with the same screw, bringing you much convenience.
  • Serve A Long Time: our mic stand extenders and metal adapters are made of quality aluminium alloy, sturdy and reliable, not easy to break or deform, adopted sandblasting on the surface, painted in classic black, delicate in appearance and comfortable to touch, offering you a pleasant experience.
  • Easy to Install: you only need to screw the extension tube onto the cantilever or microphone holder, if you need a metal adapter to....
Check Stock

Speaker Stands Designed for Sonos Speakers Pair Floor Speakers Stands for Sonos One One SL Play 1 Play 3 Play 5 Heavy Duty Floor Speaker Mount with Cable Management Black

  • ...The Floor speaker stands are made of steel with a tempered-glass base for sonos speaker, aims to increased structural stability to eliminate wobbling and tipping over and to ensure speakers’ security. The black look is well suited to match your home furniture..
  • 【Cable Management & Moveability】These speaker mounts for sonos speakers have built in 1.18”×0.78”wire holes to hide the compatible power cord down the back of the stand for concealment and to give the stands a clean look. Features rubber feet to accommodate different flooring, so you can use the stands for sonos speakers on hardwood, laminate, or tile flooring where you want..
  • 【Fast & Easy Assembly】: Speaker Stands pair for Sonos speakers come with necessary mounting hardware and a clear manual in the package. All you'll need is a phillips-head screwdriver to assemble the speaker stands and to mount your compatible speaker to the stand. Perlegear estimates an assembly time of approximately 15 minutes..
Check Stock

WORKESS Saw Horses 2 Pack Folding, Portable Saw Horses Heavy Duty 550 lbs Weight Capacity Portable Folding Legs and Easy Carry Handle

  • COMPATIBLE – ToughBuilt Universal Tool Mounts allow shop tools to quickly mount onto ToughBuilt miter saw stands..
  • HEAVY DUTY STEEL CONSTRUCTION – Rugged twists locks are easy to use and eliminate weak points that commonly break on lever-handle tool mounts. 100% steel body construction..
  • PRACTICAL AND CONVENIENT – Attach Tool Mounts to multiple saws on the jobsite and easily interchange them on your ToughBuilt Miter Saw Stand for the task at hand. Plastic feet allow saw to be used off the stand with level base..
  • BUILT TO LAST – Designed to withstand the most rugged work environments and covered by our limited lifetime warranty to the original purchaser against defects in material or workmanship..
  • USA QUALITY CONTROL – ToughBuilt products are designed, engineered, tested, and inspected in the USA to ensure high quality..
Check Stock

Alesis Module Mount | Mounting Plate for Multi-Pad Electronic Percussion Instruments - Mounts to Any Drum Hardware

  • The Ultimate Companion for Your Multipad – Mounting plate for Alesis electronic percussion instruments – the ultimate solution to take your electronic percussion module to your next live performance.
  • Rack-mounting Covered - Mounts to drum racks with a rack clamp (sold separately).
  • Stand Mounting Covered - Mounts to stands with a multiclamp (sold separately).
  • Everything You Need – Mounting Screws Included.
  • The Perfect Partnership – Combine with your SamplePad, SamplePad Pro, Sample Pad 4 or Percussion Pad and mount to any drum hardware.
Check Stock

Outdoor TV Cover - 50' Model for 48' - 52' Flat Screens - Slim Fit - Weatherproof Weather Dust Resistant Television Protector - Black

  • ...cover which protects from rain, moisture, animals, snow, wind, sunlight, seawater, and bird droppings. The exterior is constructed from premium grade waterproof and durable oxford cloth, while the soft fabric interior lays gently and won't scratch your TV..
  • Universal compatibility: Works with practically all TV mounts/brackets on the market including low profile, fixed, tilting, full-motion/swivel single-arm wall mounts, double-arm mounts, ceiling mounts and rolling TV stands.
  • Heavy-duty & 100% coverage: Durable and functional design features double stitching and a full-length fold-under bottom flap with hook and loop closures to securely seal the entire TV, effectively defending your valuable television from outside threats.
  • Additional features: For added convenience, this cover features an integrated remote control storage pocket. Also included is a free microfiber cloth to clean, dust, and polish your TV without the use of any harmful cleaning chemicals..
Check Stock

Tiziri 2PCS Speaker Stands Tripod Adjustable Height 71 Inch Speaker Stands Load Pro Audio Stage with Monitor Mount Holder Tripod Stands for DJ Speakers 180CM

  • Package Included: 2PCS Speaker Stands+2PCS Mounts.
  • Adjustable tripod stands for dj speakers.
  • Black heavy-duty anodized telescoping stand made of steel for durability and stability.
Check Stock

Grifiti Nootle Universal Phone Flexpod Flexible Tripod Adjustable Mount and Large Flex Stand for All Smartphones iPhones Samsung Nokia HTC for Photos Videos Movies

  • Nothing wimpy about this flexible stand! Grifiti Nootle Phone Flexpod is 2 great parts:Nootle Universal Phone Mount with adjustable arms and Nootle....
  • This flexpod is great with any Camera, too, and is much larger and stronger than Flexpods offered with a phone mount! You can attach your phone or any....
  • Grifiti Nootle Adjustable Phone Tripod Mount. This has the same 1/4 20 threaded connector as on all our Nootle mounts, stands, tripods, and parts so....
  • No case removal needed! Wonderful, wide, super grippy rubber padded jaws that range from 1.75 inches to 3.5 inches so you can mount just about ANY....
  • See other Grifiti Nootle Phone Monopod x Handheld monopod, mangetic stands, flexpods, quick clamps, suction stands, and more.
Check Stock