Best Motorized Follow Focus

SmallRig Seamless Focus Gear Ring (66mm to 68mm) - 3292

【STANDARD 0.8 MOD】SmallRig Seamless Focus Gear Ring 3292 is designed to fit lenses for precise and stable focal length adjustment. It features standard 0.8 MOD and allows you to add 0.8 MOD gears to a compatible lens for use with cine follow focuses..
【FITS LENS PERFECTLY】Moderate stiffness, SmallRig Φ66-Φ68 Seamless Focus Gear Ring 3292 fits lens perfectly. This 66mm to 68mm size fits virtually all lenses of the same outer diameter..
【SUPPORT 360° ROTATION】It makes less noise and no distortion, allowing 360º smooth rotation and precise focus adjustment..
【SEAMLESS SWITCHING】The ring is made by elastic material, suits lens seamlessly and evenly. (Please Note: Gear slippage or jam may occur when mounted onto lenses larger than Φ66-Φ68mm across.).
【RELATED ACCESSORIES】The ring 3292 can work with SmallRig Mini Follow Focus 3010 and other follow focus systems, such as Seamless Focus Gear Ring 62.5 to 64.5mm 3291, 72 to 74mm 3293, 75 to 77mm 3294, 78 to 80mm 3295, 81 to 83mm 3296..

Check Stock

Acouto Follow Focus Levers Adjustable Manual Flexible Gear Ring Belt for DSLR Camera Follow Focus Zoom Lens Global Engineering Standard 0.8

The follow focus ring belt can match the follow focus in a great way. And the ring belt can fit all zooming lens with size from 52mm to 86mm. 52mm, 55mm, 58mm, 62mm ,67mm, 72mm, 77mm, 82mm.
The follow focus ring belt has a high quality aluminum alloy grip, durable and wear-resistant, long service life.
Built-in Stainless steel screw, in accord with the global standard size. Gear module: Global engineering standard 0.8.
The follow focus ring belt is simple for work and convenient for installation. Whole length: 36cm.
Design with large external diameter, and fit most cameras and camcorders. Suitable for most shooting situations.

Check Stock

Wooden Camera Zip Focus Single Rod 15mm Lightweight Follow Focus with 1 1 Gear Ratio.8 Mod Cine Lens Gear and Friction Gear Fits All Lenses 15mm LW

Lightweight Follow Focus System: This single sided follow focus is ideal for compact and handheld camera setups and is universally compatible to fit all lens types.
Locks into Position: Securely clamps onto a single rod with a no-slip grip. The Zip Focus stays put and will not slip.
Handheld Control: Inspires smooth focus pulls with a 1:1 ratio on all lens types. Rubberized focus knob provides sure grip.
Compact Design: Two rotation points enable vertical alignment to the camera body. Swing arm design will allow you to pull the zip focus away from the lens for a quick lens change.
Follow Focus Kit Includes: 1 x.8 mod cine lens gear, 1x friction gear, 1 x hard stop gear, and 2 x standard marking disks.

Check Stock

SmallRig Rosette Side Handle with Record Start/Stop Remote Trigger for Multiple Selected Cameras- 3324

【STANDARD 0.8 MOD】SmallRig Seamless Focus Gear Ring 3293 is designed to fit lenses for precise and stable focal length adjustment. It features standard 0.8 MOD and allows you to add 0.8 MOD gears to a compatible lens for use with cine follow focuses..
【FITS LENS PERFECTLY】Moderate stiffness, SmallRig Φ72-Φ74 Seamless Focus Gear Ring 3293 fits lens perfectly. This 72mm to 74mm size fits virtually all lenses of the same outer diameter..
【SUPPORT 360° ROTATION】It makes less noise and no distortion, allowing 360º smooth rotation and precise focus adjustment..
【SEAMLESS SWITCHING】The ring is made by elastic material, suits lens seamlessly and evenly. (Please Note: Gear slippage or jam may occur when mounted onto lenses larger than Φ72-Φ74mm across.).
【RELATED ACCESSORIES】The ring 3293 can work with SmallRig Mini Follow Focus 3010 and other follow focus systems, such as Seamless Focus Gear Ring 62.5 to 64.5mm 3291, 66 to 68mm 3292, 75 to 77mm 3294, 78 to 80mm 3295, 81 to 83mm 3296..

Check Stock

Tilta FF-T06 Mini Follow Focus Lens Zoom Control Lightweight for DSLR for Sony A7 A9 for Nikon GH5 BMPCC 4K 6K Cage

The Mini Follow Focus is made as a single unit with the ability to adjust the single rod attachment to fit any sized cine lens or photo lens. The single rod attachment mounts to any standard 15mm rail..
The Focus wheel features a 360 degree rotation with adjustable hard stops. The focus wheel also features a fluid dampening system that helps with precision focusing. The marking disk is removable and can be marked and cleaned for repeated use..
The kit includes the Mini Follow Focus, a Zip Tie Follow Focus Ring, a 15mm single rod attachment, two allen keys, a 15x100mm black aluminum rod and a portable case..
For lenses with different pitch gears, we will offer a variety of focus gear attachments..

Check Stock

Nitze 15mm Follow Focus Kit with 3 Reversible Drive Gears 3 Marking Disks Gear Ring Belt and Crank A/B Hard Stops and 360° Infinity Zoom Adjustable Dual Rod Cine Follow Focus - MF15D

【Adjustable Rail】Nitze MF15D follow focus features an adjustable rail above the 15mm rod clamp. It can be adjusted within 50 mm to fit your desired lens by twisting the red thumbscrew at the bottom..
【A/B Hard Stops】The follow focus system supports to preset A/B hard stops focal length or use 360° infinity zoom. Built-in threaded holes allow you to put A/B hard stops screws inside when not in use to prevent loss..
【Reversible Drive Gears】The follow focus kit contains 1 x 0.8 Mod/38 Teeth, 1 x 0.8 Mod/43 Teeth, 1 x 0.8 Mod/65 Teeth drive gears. And the drive gear is reversible. It can be mounted on the front or back side of the follow focus to meet different focusing needs..
【Three Marking Disks】The follow focus comes with three marking disks for interchangeble. Snap on magnetic marking disk can be easily attached or detached..
【Crank & Gear Ring Belt】T006-03 crank is included for speedy and accurate focusing. The gear ring belt can be used when your lens is without 0.8 pitch gears..

Check Stock

SmallRig Mini Follow Focus with A/B Stops & 15mm Rod Clamp and Snap-on Gear Ring Belt for DLSRs and Mirrorless Cameras Fits Different Diameter Lenses Up to 114mm - 3010

【COMPACT DESIGN】SmallRig Mini Follow Focus 3010 is designed for easy and quick focus control in video shooting. It is basically compatible with the most cameras on the market like DLSRs & Mirrorless Cameras. In addition, it features a super lightweight design with only 195g, compact and portable, easy for carrying outside..
【ADJUSTABLE A/B STOPS】The A/B hard stops of the follow focus are adjustable, you can adjust the suitable A/B focal length according to your shooting needs. Moreover, by turning on/off the AB stops lock, you can realize the easily switch of focal length between 360° unlimited zoom and A/B focal length..
【ANTI-SLIP & ANTI-SWEAT DESIGN】The Mini Follow Focus 3010 imitates sports car hub, adopts anti-slip and anti-sweat design, and its excellent damping feeling and ergonomic design helps to control the focal length you need more accurately and comfortable, thus realizing a better shooting..
【MODULAR DESIGN】SmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allows for attaching other SmallRig accessories such as NATO Side Handle 2187, Super....

Check Stock

Neewer Aluminum Film Movie Kit System Rig for Canon/Nikon/Pentax/Sony and other DSLR Cameras Style II

Kit Includes: (1)Aluminum Alloy Video Cage,(1)Top Handle Grip,(2)15mm Rod,(1)Matte Box,(1)Follow Focus,(1)Shoulder Rig.
Video Cage: Made of aluminum alloy, sturdy and solid enough.
Can efficiently avoid and eliminate any microseism or any blur of pictures caused by....
Matte Box: This Matte Box could be adjusted the height (up to 45mm) according to the lens of camera on the rail rod system. It can also works with....
Follow Focus: The follow focus finder can let you shoots precisely, focus precisely and operate smoothly. Whether you're shooting with a fixed-lens....
Shoulder Rig: Includes 15mm rod, Soft Rubber Shoulder Pad and Dual-hand Handgrip For All DSLR Video Cameras and DV Camcorders.

Check Stock

K'NEX K-Force - Flash Fire Motorized Blaster Building Set - 288 Pieces - For Ages 8+ Engineering Education Toy

ENDLESS BUILDING POSSIBILITIES – Let your children experience endless building possibilities with this unique building system from K’NEX K-Force Build and Blast! The Flash Fire Motorized Blaster Building Set comes with 288 parts and pieces that can be clicked together to build a rapid-fire blaster. This activity will keep your children occupied for hours!.
MOTORIZED TOY – The Flash Fire Motorized Blaster Building Set is battery-operated and motorized. This feature allows kids to fire 10 darts as fast as they can pull the trigger and as far as 75 feet. This set is recommended for children ages 8 and up..
EASY TO USE – K’NEX K-Force Flash Fire Motorized Blaster comes with easy-to-follow building instructions for 7 unique buildable blaster and target combinations. Unleash your kids’ creativity as they make their own designs for open-ended fun!.
FUN AND ENGAGING – Exercise your child’s imagination with this motorized building set. As children play with the set, they strengthen their hand and eye coordination, fine motor and problem-solving skills, and spatial awareness. This toy from K’NEX is fun and engaging — any child will love it!.
STEAMagination – This is the connection of STEAM (science, technology, engineering, arts & ma....

Check Stock